Overhead Cable 1*10+10mm2 Concentric Cable Copper XLPE 0.6/1kv
Product Description
APPLICATION
The concentric cable is used as electric service entrance from the power distribution network until the meter panel (especially where it is required to prevent "black" losses or electric power robbery), and as feeder cable from the meters panel until the panel or general distribution panel, just as it is specified in the National Electrical Code.
This type of conductor can be used in dry and wet places, directly buried or outdoors;Its maximum temperature of operation is 90 ºC and its voltage of service for all the applications is 600 V.
Construction of concentric cable
1.Solid or stranded copper core/Aluminum core/AAAC
2.Insulation with XLPE or PE or PVC
3.For two conductor cable, it is applied a helical mesh of copper wires over the central conductor,
4.For three or four conductors cable , parallel conductor or stranded conductor
5.PVC filler
6.Helical mesh of copper wires
7.Wrapping tape
8.Black color jacket of PE or PVC
STANDARD
XLPE/PE /PVC Insulated Concentric Cable is designed as IEC ,BS ,ASTM and othere standard or according to client’s requirement.
WELCOME TO ENQUIRY FOR BEST PRICES!
- Next: Low Voltage Cable Aluminum 1*10+10mm2 Concentric XLPE
- Previous: ACSR Conductor with ASTM Standard 1200mcm
Contact us
Similar Or Related
-
2X10mm2 Hard Drawn Copper Conductor XLPE Insulated Concentric Cable without Pilot Core 0.6/1kV
-
2X6mm2 Hard Drawn Copper Conductor XLPE Insulated Concentric Cable without Pilot Core 0.6/1kV
-
2X16mm2 Concentric Solid Aluminum Conductor Service cable Without Pilot Core 600/1000V
-
Overhead Cable 1*10+10mm2 Concentric Cable Copper XLPE 0.6/1kv