Concentric XLPE Solid Aluminum Cable 16mm2 with 4X0.5mm2 Pilot Cores 600/1000V for 33kV Distribution Line

Concentric XLPE Solid Aluminum Cable 16mm2 with 4X0.5mm2 Pilot Cores 600/1000V for 33kV Distribution Line

Quick Details

Concentric XLPE Solid Aluminum Cable 16mm2 with 4X0.5mm2 Pilot Cores 600/1000V for 33kV Distribution Line

Concentric Cable


Service Cable



Round Wire



AC Cable

Low and Medium Voltage Cable

Construction, Overhead, Industrial, Power Station



Jiangsu, China


Product Details


The concentric cable is used as electric service entrance from the power distribution network until the meter panel (especially where it is required to prevent "black" losses or electric power robbery), and as feeder cable from the meters panel until the panel or general distribution panel, just as it is specified in the National Electrical Code.

This type of conductor can be used in dry and wet places, directly buried or outdoors;Its maximum temperature of operation is 90 ºC and its voltage of service for all the applications is 600 V.

Applicable Standards

It is designed as IEC ,BS ,ASTM and othere standard or according to client’s requirement.

Cable Construction

1. Phase Conductor

The phase conductor shall be circular stranded annealed aluminum conductors (class 2).The phase conductor shall have a left-hand direction of lay. The raw material used for aluminum conductors must have a minimum purity of 99.5%. In both cases the requirements of Standard IEC 60228 must be complied with.

2. Insulation

The insulation of the phase conductor shall be XLPE. It shall be applied by an extrusion process and shall be spark tested

3. Concentric Layer

The neutral conductor shall be concentric and shall be manufactured from plain annealed aluminum wires. The concentric layer shall be applied with a right hand direction of lay.

4. Pilot Core

The pilot core shall be copper condcutor with LLDPE insulation.

5. Over sheath

The over sheath shall be an extruded layer of UV-LLDPE Material.

Testing Facilities

Packaging Photos

Workshop Views

About us:
Jiangsu Grand Cable Co., Ltd. was founded in 2002 with a registered capital of 308.88 million CNY(equivalent to 44.13 million USD). The company is located at Section B, Guanlin Industrial ConcentratedArea, Yixing, Wuxi City, Jiangsu 214251, P.R. China, covering an area of 130,000 squaremeters .It owns total assets of 100 million CNY and more than 500 staff members. The annualproduction capacity reaches 2.5 billion CNY .It is one of key enterprises of China Wire & Cable Industry, the National High-Tech Enterprises, the Innovation and Development Pilot Enterprises of Jiangsu Province, the Private Technology Enterprises in Jiangsu Province, keeping Contract and Credit Enterprises and AAA-Grade Credit Enterprise. We have passed ISO9001 Quality System,ISO14001 Environment Management System Certificate and OHSAS 18001 Occupational Health and Safety Management System Certificate.

With more than 300 sets of first-class domestic and imported manufacture and test equipment,Grand Cable can manufacture ten thousand specifications, including Bare Conductors, Earthing Materials, Electric Cables, Solar Cables, Overhead/Aerial Cables, Control Cables, Instrumentation Cables, Power Cables(LV/MV/EHV), Special Cables.


Q:  How long does it take get my inquiry replied?

A:  Mostly the inquiry will be replied within 12 hours. And the quote will be sent to you in 1-3 days. It depends on the technical parameters and requirements of the cable. We will give you a reasonable and accurate quote.

Q:  Can I get samples before placing the order?

A:  You will get a sample for free if we have the storage of that cable.

Q:  What’s the MOQ of your product?

A:  The MOQ of our most product is 1000 meters. But if there’s any exceptional situation, we can make some negotiations.

Fore More Information, Please do feel free to contact us!

Tags: , ,

Contact us




Success! Thanks for Your Request.
Error! Please Try Again.