Mv-90, Power Cable, 5 Kv, 3/C, Cu/XLPE/Cts/PVC (ICEA S-93-639/NEMA WC71/UL 1072)

Product Name:

Model NO.:

MV-90

Application:

Construction, Underground, Industrial, Power Station

Voltage:

Low and Medium Voltage Cable

Current:

DC Cable

Insulation Material:

XLPE

Sheath Material:

PVC

Material Shape:

Round Wire

Wire Core Material:

Bare Copper Wire

Certification:

ISO, CCC

Model:

Mv-90

Brand:

Boan

Rated Voltage:

5 Kv

Number of Cores:

Section:

8 AWG-1000 Mcm

Class of Conductor:

Type of Shield:

Copper Tape

Trademark:

DingAn

Transport Package:

Heated Steel-Wooden Drum/Steel Drum

Specification:

SGS

Origin:

Jiangsu Yixing, China

HS Code:

8544601200

Product Description

MV-90, Power Cable, 5 KV, 3/C, Cu/XLPE/CTS/PVC (ICEA S-93-639/NEMA WC71/UL 1072)

Features

UL Listed as MV-90. Rated as Sunlight Resistance for CT use, 1/0 AWG and larger. Oil Resistance I jacket. True Triple extrusion system and closed handling raw materials system, to eliminate any contact with ambient, until extrusion process ends.

Application

Primary power and distribution circuits in industrial and commercial installations, power circuits in generating plants where line to ground fault current are within shield capabilities. May be used in wet or dry locations, installed in raceways, duct, and open air, aerially or directly buried where permitted by NEC.

Standards

UL 1072: Medium Voltage Power Cables.

ICEA S-93-639/NEMA WC74: 5 kV – 46 kV Shielded Power Cables.

ICEA S-97-682: Standard for Utility Shielded Power Cables Rated 5 kV- 46 kV.

AEIC CS8: Specification for Extruded Dielectric, Shielded Power Cables Rated 5 kV – 46 kV.

Specifications

Maximum operating voltage: 5 kV to 35 kV 100% and 133% IL

Maximum conductor operation temperatures:

Wet and dry locations: Normal: 90 °C, Emergency: 130 °C, Short Circuit: 250 °C

Engineering Information
1. Conductor: Soft annealed uncoated copper compacted Class B per ASTM B496 or hard drawn Aluminum-1350 compacted Class B per ASTM B400.
2. Conductor Shield: Semi conducting cross-linked polyethylene (XLPE).
3. Insulation: Thermoset crosslinked polyethylene (XLPE).
4. Insulation Shield: Semi conducting cross-linked polyethylene (XLPE).
5. Metallic Shield: Soft annealed uncoated copper tape, 5 mil thick, 25% minimum overlap.
6. Assembly: Conductors cabled with non-hygroscopic fillers, as required and binder tape.
7. Jacket: Black sunlight resistance and flame retardant thermoplastic polyvinyl chloride (PVC) compound.

100% and 133% Insulation Levels (90 mil)
Size	Number of Strands	Conductor Nominal	Jacket Thickness	Approximate Outside Diameter	Approximate Net Weight
Size	Number of Strands	Conductor Nominal	Jacket Thickness	Approximate Outside Diameter	Copper	Aluminum
AWG of kcmil		in	mil	in	lb/kft
8	7	0.13	80	1.15	735	–
6	7	0.17	80	1.23	908	734
4	7	0.21	80	1.32	1126	849
2	7	0.27	80	1.44	1451	1010
1	19	0.3	80	1.51	1704	1149
1/0	19	0.34	80	1.59	1974	1273
2/0	19	0.38	110	1.74	2442	1559
3/0	19	0.42	110	1.84	2862	1746
4/0	19	0.48	110	1.95	3379	1974
250	37	0.52	110	2.07	3852	2191
300	37	0.57	110	2.18	4460	2468
350	37	0.62	110	2.28	5033	2707
400	37	0.66	110	2.37	5595	2939
500	37	0.74	110	2.59	6844	3524
600	61	0.81	140	2.84	8111	4124
750	61	0.91	140	3.05	9808	4831
1000	61	1.06	140	3.37	12536	5902