Multicores PVC/XLPE Cu/Al Power Cable with Steel/Aluminum Wire Armored

Product Name:

Model NO.:

multicores Copper Power Cable

Application:

Construction, Underground, Industrial, Power Station

Voltage:

Low and Medium Voltage Cable

Current:

AC Cable

Insulation Material:

XLPE/PVC

Sheath Material:

PVC

Material Shape:

Round Wire

Wire Core Material:

99.99% Copper

Certification:

ISO, CCC, CE, RoHS

Model:

Yjv23/Yjlv32

Brand:

Hongda

Standard:

IEC 60502/NFC 33-209

HS Code:

8544492100

Armor:

Steel/Aluminum Wire Armored

Quality Guarantee:

10 Years

Core:

Multicores

Conductor Material:

Copper/Al

Insulated Color:

Red,Yellow,Blue,Green,Black

Sheath Color:

Black

Manufacture:

Yes

Sample:

Yes

Trademark:

Hongda

Transport Package:

Wooden Drum

Specification:

1.5-630mm2

Origin:

China, Henan

HS Code:

8544492100

Product Description

Application
Armored copper cable is a very innovative concept for overhead power distribution as compared to the conventional bare conductor overhead distribution system.
It provides higher level of safety and reliability, lower power losses and ultimate system economy by reducing installation, maintenance and operative cost.
Caledonian LV Aerial Bundle Cables are designed to supply 600/1000 volt aerial service for temporary service at construction sites, as a service drop (power pole to service entrance), as a secondary cable (pole to pole) or street lighting.
This over-head cable provides reinforced insulation acc. IEC 61140 and fulfill therefore Class II acc. IEC 61140. It is not flame retardant. But this could be if requested change to a flame retardant cable.

Standard
Basic design to BS 7870 / TNB Specification(IEC 60502) / HD 626 S1 / NFC 33-209 / AS/NZS 3560-1 standards
Construction

Conductor	Aluminium conductor, round stranded compressed (RM).
Insulation	XPLE compound, UV-resistant.
Core Identification	1, 2 resp. 3 raised longitudinal ribs on the surface of the cores. The surface of the neutral core should have at least 12 ribs for cross-sections up to 50 mm² and a minimum of 16 ribs for cores above 50 mm². In the case of five core bundles the surface of the protective core should be smooth.

Electrical Properties

Rated Voltage	0.6/1kV
Test Voltage	4 Veff kV
Minimum Laying Temperature	-20°C
Operating Temperature	-40°C~ +90°C
Maximum Short-circuit Temperature	250°C
Maximum Conductor Temperature	80°C
Minimum Bending Radius	18×OD

Construction Parameters
BS 7870 standard power cable with armored

Number of Cores x Nominal Cross Section	Overall Diameter	Weight	Maximum Conductor Resistance	Minimum Breaking Load	Current Rating
No.×mm²	mm	Kg/Km	Ω/Km	KN	A
1×16 RM	8.0	74	1.910	2.5	72
1×25 RM	9.0	106	1.200	4.0	107
1×35 RM	10.5	138	0.868	5.5	132
1×50 RM	11.8	182	0.641	8.0	165
1×70 RM	13.0	252	0.443	10.7	205
1×95 RM	15.4	333	0.320	13.7	240
1×120 RM	17.0	408	0.253	18.6	290
1×150 RM	19.0	502	0.206	23.2	334
1×185 RM	21.0	611	0.164	28.7	389
1×240 RM	24.0	801	0.125	37.2	467
2×16 RM	15.6	147	1.910	2.5	72
2×25 RM	18.0	208	1.200	4.0	107
2×35 RM	20.0	277	0.868	5.5	132
2×50 RM	23.5	361	0.641	8.0	165
2×70 RM	25.4	505	0.443	10.7	205
2×95 RM	30.3	666	0.320	13.7	240
2×150 RM	38.0	1004	0.206	23.2	334
4×16 RM	18.8	286	1.910	2.5	72
4×25 RM	21.2	430	1.200	4.0	107
4×35 RM	24.1	553	0.868	5.5	132
4×50 RM	27.8	746	0.641	8.0	165
4×70 RM	31.8	1009	0.443	10.7	205
4×95 RM	37.8	1332	0.320	13.7	240
4×120 RM	54.4	1632	0.253	18.6	290
4×50 + 1×25 RM	31.9	814	0.641/1.200	8.0/4.0	165/107
4×50 + 1×35 RM	31.9	845	0.641/0.868	8.5/5.5	165/132
4×70 + 1×25 RM	36.0	1105	0.443/1.200	10.7/4.0	205/107
4×70 + 2×25 RM	40.0	1217	0.443/1.200	10.7/4.0	205/107
4×95 + 1×25 RM	41.8	1438	0.320/1.200	13.7/4.0	240/107
4×95 + 2×25 RM	42.0	1544	0.320/1.200	13.7/4.0	240/107
4×120 + 1×25 RM	59.0	2050	0.253/1.200	18.6/4.0	290/107

Other cross-sections can be offered upon request.
TNB Specification(IEC 60502) standard , armored power cable

Number of Cores x Nominal Cross Section	Overal Diameter	Weight	Maximum Conductor Resistance	Minimum Breaking Load	Current Rating
No.×mm²	mm	Kg/Km	Ω/Km	KN	A
1×16+1×25 RM	15.3	160	1.910	2.5	72
3×16+1×25 RM	19.0	290	1.200	4.0	107
3×25+1×25 RM	23.2	400	0.868	5.5	132
3×35+1×25 RM	25.6	500	0.641	8.0	165
3×50+1×35 RM	30.0	680	0.443	10.7	205
3×70+1×50 RM	34.9	920	0.320	13.7	240
3×95+1×70 RM	40.6	1270	0.253	18.6	290
3×120+1×70 RM	44.1	1510	0.206	23.2	334
3×150+1×95 RM	49.2	1870	0.164	28.7	389
3×185+1×120 RM	54.9	2340	0.125	37.2	467
3×25+1×25+1×16 RM	23.2	470	1.910	2.5	72
3×35+1×25+1×16 RM	25.6	560	1.200	4.0	107
3×50+1×35+1×16 RM	30.0	740	0.868	5.5	132
3×70+1×50+1×16 RM	34.9	980	0.641	8.0	165
3×95+1×70+1×16 RM	40.6	1330	0.443	10.7	205
3×120+1×70+1×16 RM	44.1	1580	0.320	13.7	240
3×150+1×95+1×16 RM	49.2	1940	0.206	23.2	334
3×185+1×120+1×16 RM	54.9	2410	1.910	2.5	72

Other cross-sections can be offered upon request.
HD 626 S1 standard

number of cores x nominal cross section	outer diameter	total weight	max. conductor- resistance	min. breaking load of conductor strand	current rating in the air
mm²	ca. mm	ca. kg/km	Ohm/km	kN	A
2x 16 RM	15.6	147	1.910	2.5	72
2x 25 RM	18.0	208	1.200	4.0	107
2x 35 RM	20.0	277	0.868	5.5	132
2x 50 RM	23.5	361	0.641	8.0	165
4x 16 RM	18.8	286	1.910	2.5	72
4x 25 RM	21.2	430	1.200	4.0	107
4x 35 RM	24.1	553	0.868	5.5	132
4x 50 RM	27.8	746	0.641	8.0	165
4x 70 RM	31.8	1009	0.443	10.7	205
4x 95 RM	37.8	1332	0.320	13.7	240
4x 120 RM	54.4	1632	0.253	18.6	290
4x 35 + 1x 35 RM	30.0	694	0.868/0.868	5.5/5.5	132/132
4x 50 + 1x 25 RM	31.9	814	0.641/1.200	8.0/4.0	165/107
4x 50 + 1x 35 RM	31.9	845	0.641/0.868	8.5/5.5	165/132
4x 70 + 1x 25 RM	36.0	1105	0.443/1.200	10.7/4.0	205/107
4x 70 + 2x 25 RM	40.0	1217	0.443/1.200	10.7/4.0	205/107
4x 70 + 1x 35 RM	36.2	1150	0.443/0.868	10.7/5.5	205/132
4x 70 + 2x 35 RM	40.1	1289	0.443/0.868	10.7/5.5	205/132
4x 95 + 1x 25 RM	41.8	1438	0.320/1.200	13.7/4.0	240/107
4x 95 + 1x 35 RM	41.8	1467	0.320/0.868	13.7/5.5	240/132
4x 95 + 2x 25 RM	42.0	1544	0.320/1.200	13.7/4.0	240/107

Other cross-sections can be offered upon request.
NFC 33-209

Number of Cores x Nominal Cross Section	Overal Diameter	Weight	Maximum Conductor Resistance	Minimum Breaking Load	Current Rating
No.×mm²	mm	Kg/Km	Ω/Km	KN	A
2×10 RM	12.8	93	3.080	1.5	38
4×10 RM	15.4	183	3.080	1.5	38
2×16 RM	14.8	129	1.910	2.3	72
2×16 RN + 2×1.5 RE	14.8	176	1.910/12.100	2.3	72
4×16 RM	17.8	257	1.910	2.3	72
4×16 RN + 2×1.5 RE	17.8	304	1.910/12.100	2.3	72
2×25 RM	18.0	202	1.200	3.8	107
2×25 RM + 2×1.5 RE	18.0	249	1.200/12.100	3.8	107
4×25 RM	21.7	404	1.200	3.8	107
4×25 RM + 2×1.5 RE	21.7	451	1.200/12.100	3.8	107
2×35 RM	20.8	269	0.868	5.2	132
2×35 RM + 2×1.5 RE	20.8	316	0.868/12.100	5.2	132
4×35 RM	25.1	539	0.868	5.2	132
4×35 RM + 2×1.5 RE	25.1	586	0.868/12.100	5.2	132
2×50 RM	23.4	352	0.641	7.6	165
2×50 RM + 2×1.5 RE	23.4	399	0.641/12.100	7.6	165
1×54.6 RM + 3×25 RM	21.7	507	0.630/1.200	3.8	107
1×54.6 RM + 3×25 RM + 1×16 RM	24.3	573	0.630/1.200/1.910	3.8/2.3	107/72
1×54.6 RM + 3×25 RM + 2×16 RM	29.7	639	0.630/1.200/1.910	3.8/2.3	107/72
1×54.6 RM + 3×25 RM + 3×16 RM	31.1	705	0.630/1.200/1.910	3.8/2.3	107/72
1×54.6 RM + 3×35 RM	25.1	615	0.630/0.868	5.2	132
1×54.6 RM + 3×35 RM + 1×16 RM	28.1	680	0.630/0.868/1.910	5.2/2.3	132/72
1×54.6 RM + 3×35 RM + 2×16 RM	34.3	748	0.630/0.868/1.910	5.2/2.3	132/72
1×54.6 RM + 3×35 RM + 3×16 RM	35.9	814	0.630/0.868/1.910	5.2/2.3	132/72
1×54.6 RM + 3×35 RM + 1×25 RM	28.1	714	0.630/0.868/1.200	5.2/3.8	132/107
1×54.6 RM + 3×50 RM	28.2	741	0.630/0.641	7.6	165
1×54.6 RM + 3×50 RM + 1×16 RM	31.6	806	0.630/0.641/1.910	7.6/2.3	165/72
1×54.6 RM + 3×50 RM + 2×16 RM	38.6	875	0.630/0.641/1.910	7.6/2.3	165/72
1×54.6 RM + 3×50 RM + 3×16 RM	40.4	940	0.630/0.641/1.910	7.6/2.3	165/72
1×54.6 RM + 3×50 RM + 1×25 RM	31.6	841	0.630/0.641/1.200	7.6/3.8	165/107
1×54.6 RM + 3×70 RM	33.0	950	0.630/0.443	10.2	205
1×54.6 RM + 3×70 RM + 1×16 RM	37.0	1014	0.630/0.443/1.910	10.2/2.3	205/72
1×54.6 RM + 3×70 RM + 2×16 RM	45.2	1083	0.630/0.443/1.910	10.2/2.3	205/72
1×54.6 RM + 3×70 RM + 3×16 RM	47.3	1148	0.630/0.443/1.910	10.2/2.3	205/72
1×54.6 RM + 3×70 RM + 1×25 RM	37.0	1048	0.630/0.443/1.200	10.2/3.8	205/107
1×54.6 RM + 3×70 RM + 2×25 RM	45.2	1150	0.630/0.443/1.200	10.2/3.8	205/107
1×54.6 RM + 3×70 RM + 3×25 RM	47.3	1250	0.630/0.443/1.200	10.2/3.8	205/107
1×54.6 RM + 3×95 RM	37.4	1176	0.630/0.320	13.5	240
1×54.6 RM + 3×95 RM + 1×16 RM	41.9	1243	0.630/0.320/1.910	13.5/2.3	240/72

Other cross-sections can be offered upon request.
AS/NZS 3560 Part 1

Number of Cores x Nominal Cross Section	Overall Diameter	Weight	Minimum Breaking Load	Current Rating
No.×mm²	mm	Kg/Km	KN	A
2×16 RM	15.0	140	4.4	78
2×25 RM	17.6	210	7.0	105
2×35 RM	19.6	270	9.8	125
2×50 RM	22.8	370	11.4	150
2×95 RM	30.6	680	15.3	230
3×25 RM	19.0	310	8.8	97
3×35 RM	21.1	410	9.8	120
3×50 RM	24.6	550	11.4	140
4×16 RM	18.1	290	8.8	74
4×25 RM	21.2	410	14.0	97
4×35 RM	23.7	550	19.6	120
4×50 RM	27.5	740	28.0	140
4×70 RM	31.9	1000	39.2	175
4×95 RM	36.9	1370	53.2	215
4×120 RM	40.6	1690	67.2	250
4×150 RM	43.9	2020	84.0	280

Other cross-sections can be offered upon request.

Construction.

Conductor shaped:RE=circular solid,CC=compacted circular stranded,SM=sector shaped stranded
Conductors: Plain circular, compacted or shaped stranded copper or aluminium conductor
Insulation: XLPE (cross-linked polyethylene) rated at 90°C
Colour identification
1 Core : Red or Black
2 Cores : Red, Black
3 Cores: Red, Yellow, Blue
4 Cores: Red, Yellow, Blue, Black
5 Cores: Red, Yellow, Blue, Black, Green
Above 5 Cores: Black Cores with White numerals
The above identifying can be changed as order
Assembly /Inner Sheath :Two, Three or Four insulated conductors are laid-up together with non-hygroscopic fillers and the assembly is bedded with an extruded layer of PVC. In case of non-armoured cables, this layer may be omitted
Armour:Aluminum/Galvanized Steel Wires, single core cables shall be Aluminium wire armour, Aluminum/Steel Tapes applied helically over the bedding of multi-core cables as per IEC 60502.
Outer Sheath:Outer sheath shall be of Extruded PVC Type ST2 as per IEC 60502-1 or Type 9 as BS 6346/5467.Special type of PVC sheathing material such as Fire Retardant PVC, Anti-Termite PVC, Anti-Rodent PVC, Sunlight resistant PVC, Oil Resistant PVC are available on special request. Also, special sheathing materials such as LLDPE, MDPE, HDPE, LSZH, and CPE are available on request.

Core structure
1. 1 core: 1.5mm2, 2.5mm2, 4mm2, 6mm2, 10mm2, 16mm2, 25mm2, 35mm2, 50mm2, 70mm2, 95mm2, 120mm2, 150mm2, 185mm2, 240mm2, 300mm2, 400mm2, 500mm2, 630mm2.

2. 2 core: 1.5mm2, 2.5mm2, 4mm2, 6mm2, 10mm2, 16mm2, 25mm2, 35mm2, 50mm2, 70mm2, 95mm2, 120mm2, 150mm2, 185mm2, 240mm2, 300mm2, 400mm2.

3. 3 core: 1.5mm2, 2.5mm2, 4mm2, 6mm2, 10mm2, 16mm2, 25mm2, 35mm2, 50mm2, 70mm2, 95mm2, 120mm2, 150mm2, 185mm2, 240mm2, 300mm2, 400mm2.

4. 4 core: 1.5mm2, 2.5mm2, 4mm2, 6mm2, 10mm2, 16mm2, 25mm2, 35mm2, 50mm2, 70mm2, 95mm2, 120mm2, 150mm2, 185mm2, 240mm2, 300mm2, 400mm2.

5. 5 core: 1.5mm2, 2.5mm2, 4mm2, 6mm2, 10mm2, 16mm2, 25mm2, 35mm2, 50mm2, 70mm2, 95mm2, 120mm2, 150mm2, 185mm2, 240mm2, 300mm2, 400mm2.

6. 3+1 core: 2.5+1.5mm2, 4+2.5mm2, 6+4mm2, 10+6mm2, 16+10mm2, 25+16mm2, 35+16mm2, 50+25mm2, 70+35mm2, 95+50mm2, 120+70mm2, 150+70mm2, 185+95mm2, 240+120mm2, 300+150mm2, 400+185mm2

7. 3+2 core: 2.5+1.5mm2, 4+2.5mm2, 6+4mm2, 10+6mm2, 16+10mm2, 25+16mm2, 35+16mm2, 50+25mm2, 70+35mm2, 95+50mm2, 120+70mm2, 150+70mm2, 185+95mm2, 240+120mm2, 300+150mm2, 400+185mm2

8. 4+1 core: 2.5+1.5mm2, 4+2.5mm2, 6+4mm2, 10+6mm2, 16+10mm2, 25+16mm2, 35+16mm2, 50+25mm2, 70+35mm2, 95+50mm2, 120+70mm2, 150+70mm2, 185+95mm2, 240+120mm2, 300+150mm2, 400+185mm2

Contact us
Looking forward to cooperation with you.If you have any question or need our certification and sample.Pls contact me freely.You can talk with me by Email or chat software.Tel: +86 18639114351