AAAC Conductor
Product Description
AAAC conductor is made from aluminum-magnesium-silicon alloy of high electrical conductivity containing magnesium (0.6-0.9%) & silicon (0.5-0.9%) to give it better mechanical properties after treatment. AAC conductors are generally made out of aluminum alloy 6201 (minimum conductivity is 54%). AAC conductor has a better corrosion resistance and better strength to weight ratio and improved electrical conductivity than ACSR conductor on equal diameter basis.
Key Benefits:
High tensile strength as compared to AAC conductor.
Higher conductivity as compared to ACSR conductor.
Better corrosion resistance than ACSR conductor.
Physical contents of aluminium alloy:
Density – 2.70 kgm/dm3 at 20° C
Coefficient of Linear Expansion – 23 x 10-6 / ° C
Resistivity – 0.0326 Ohms mm2/m at 20° C
Constant Mass Temperature Coefficient (a) – 0.00360/ ° C
Material – Heat treated Al. Mg. Si. Alloy
| ASTM B399 | Akron Alton Ames Azusa Anaheim Amherst Alliance Butte Canton Cairo Darien Elgin Flint Greely AWG or MCM: 6 4 2 1/0 2/0 3/0 4/0 250 300 350 400 450 500 550 600 |
| BS 3242 | Box Acacia Almond Cedar Fir Hazel Pine Willow Oak Mulberry Ash Elm Poplar Sycamore Upas Walnut Yew Totara Rubus Araucaria |
| BS EN50183 | Box Acacia Almond Cedar Deodar Fir Hazel Pine Holly Willow Oak Mulberry Ash Elm Poplar Sycamore Upas Yew Totara Rubus Sorbus Araucaria Redwood |
| DIN 48201 | sq.mm: 16 25 35 50 70 95 120 150 185 240 300 400 500 625 800 1000 |
| IEC 61089 | sq.mm: 10 16 25 40 63 100 125 160 200 250 315 400 450 500 560 630 710 800 900 1000 1120 1250 |
Workshop:
Shipment:
Customer:
Certification:
FAQ:
1. How many years has Henan Jiapu Cable Group been in production?
Founded in October 1998 by Mr. Gu, our facility has three separate manufacturing workshops within its 100,000-sq.-ft. building. In 2012, we operates in a new 666,000 sq. foot state-of-the-art facility in Xiaodian Industry Park.,Xinxiang, Henan ,China
2. What kinds of products does Jiapu Cable manufacture?
1)Bare Conductor ,such as AAC,AAAC,ACSR,ACAR,AACSR,ACSR/AW and so on;
2)Aerial Bundled Cable (1kV-35kV ),such as Duplex,Triplex,Quadruplex Drop Wires and so on;
3)PVC Insulated (Flexible ) Wire ;
4) PVC Insulated and Sheathed (Armoured) Power Cable;
5)Low, Medium, High Voltage (1kV-220kV) XLPE Insulated (Armoured) Power Cable;
6)Welding Cable, Control Cable, Concentric Cable, Rubber Sheathed Cable and so on;
3. What kind of certifications do you have?
SABS, CE, ISO9001-2000, SGS
4.Which markets do you involve mainly in?
Our products have been exported mainly to Africa, Middle East, South-east Asia, South America,Central America,North America, Europe ,Australia, etc.
5. Which standards do you comply with when you produce the electrical wires and cables ?
We are able to produce electrical wires and cables based on GB, JB, IEC, BS, DIN, ASTM, JIS, NF, AS/NZS, CSA, etc. Meanwhile, we can design and manufacture the cables according to the samples and technical specification the customer supply.
6. What is the min.order quantity ?
It depends on the type and size of electrical wires and cables. For some small electrical wires, 100 meters can be accepted .But for the power cables with medium or high voltage, that should comply with the property of installed equipments. Anyhow,we will try our best to solve the problem and meet with the requirement If you have special request.
7. What is the production capacity per week or per month ?
For the bare conductor, we can finish 3000 tons within one month. For power cables, that depends on the type and size. The total output value per month is approx. USD3,000,000.00 for insulated aluminum cables and that is approx. USD8,000,000.00 for insulated copper cables.
8. Do you supply the customers with installation service in foreign country ?
We don’t have professional installation teams in foreign country.But if that is necessary, we will recommend our partners to cooperate with you.
