XLPE Cable 300mm 240mm 185mm
Product Description
Specifications
1 IEC, AS, DIN, BS standard
2 ISO,CE KEMA certification
3 Response within 12 hours
4 Free Sample
5 Factory direct sale
XLPE cable 300mm 240mm 185mm
Application
The electric cable is applied to transmit and distribute power in power transmission and distribution system of 35kV or lower. It is widely adopted in the fields including power, construction, mines, metallurgy, petrochemical industry and communication in complete replace of oil immersed paper insulated power cable and in partial re-place of PVC insulated power cable.
Standards
The cable is manufactured according to IEC 60502.1, IEC 60502.2, AS/NZS 1429.1, AS/NZS 5000.1, BS 6622, BS 6346, VDE 0276 . It is suitable to be installed in the power line with rated voltage from (U0/U)0.6/1kV to 19/33kV for power transmission.
Construction
Conductors: Copper or Aluminium conductor, round standed or Shaped, Class 2 to IEC 60228, BS EN 60228. For smaller sizes, a solid round conductor, Class 1 as per IEC 60228, BS EN 60228 can also be supplied upon request.
Insulation: XLPE material and thickness shall be as per IEC 60502 or BS 5467 rated for 90°C continuous operation.
Type & Designation
| Type | Description | Applications |
| N2XY/N2XSEY NA2XY/NA2XSEY |
Cu or AL conductor XLPE insulated PVC sheathed power cables. | For laying indoors, in tunnels, in ducts. Able to bear extermal mechanical force but not large pulling forces. Single core cables are impermissible to be laid in magnetic ducts. |
| N2X2Y/N2XSE2Y NA2X2Y/NA2XSE2Y |
Cu or AL conductor XLPE insulated PE sheathed power cables. | |
| N2XBY/N2XSEBY NA2XBY/NA2XSEBY |
Cu or AL conductor XLPE insulated PVC sheathed internal steel tape armoured power cables. | For laying indoors, in tunnels, in ducts and underground. Able to bear extermal mechanical force but not large pulling forces, Impermissible to use single core cable in A.C circuit. |
| N2XB2Y/N2XSEB2Y NA2XB2Y/NA2XSEB2Y |
Cu or AL conductor XLPE insulated PE sheathed internal steel tape armoured power cables. | |
| N2XRY/N2XSERY NA2XRY/NA2XSERY |
Cu or AL conductor XLPE insulated PVC sheathed internal steel wire armoured power cables. | For laying in underground areas along route with large difference of elevation, in shafts and in water, able to bear a corresponding pulling forces and external mechanical forces. |
| N2XR2Y/N2XSER2Y NA2XR2Y/NA2XSER2Y |
Cu or AL conductor XLPE insulated PE sheathed internal steel wire armoured power cables. |
Cable Properties
Special features which we can offer for LV cables:
* Watertight construction (both radial and longitudinal).
* Resistant to heavy vibration.
* Available in long delivery lengths to reduce number of joints.
* Corrosion-free screen area.
* Copper or aluminum conductor up to 2500mm².
* Different options for outer PE jackets (LDPE, MDPE & HDPE).
* Different options for LSF, LSZH & FRPVC, being anti-termite or UV resistant as per BS 7835, IEC 60332 etc.
* Strippable insulation screen.
* Increased armour conductivity by insertion of hard drawn copper wires in armour.
The maximum rated temperature
XLPE insulated,the maximum operating temperature of conductor shall exceed 90ºCwhen the cable is used for long not period. The temperature of conductor shall not exceed 250ºC at short circuit for 5 seconds.
PVC insulated,the maximum operating temperature of conductor shall exceed 90ºC or 70 ºC when the cable is used for long not period. The temperature of conductor shall not exceed 160ºC at short circuit for 5 seconds.
Installation requirement
The installation of cable is not limited by the difference of elevation along the route. The ambient temperature should not be below 0ºC during installation. The permissible bending radius for cable shall be complied with the following regulations:
For single-core: R>20(D+d) +/-5%
For multi-core: R>15(D+d) +/-5%
Where:R-bending radius (mm) , D-overall diameter of the cable (mm) , d-diameter of conductor (mm).
Single core cable of using in AC circuit shall be without armour or with steel wire armour and shall not be laid in magnetic ducs.
Rated voltage, No. of core and range of sectional area
Rate Voltage(kv):0.6/1kV 1.8/3kV 3.6/6kV 6/10kV 8.7/15kV 12/20kV 18/30kV 21/35kV
Equivalent to : 0.6/1kV 1.9/3.3kV 3.8/6.6kV 6.35/11kV 8.7/15kV 12.7/22kV 19/33kV 21/35kV
No. of core and sectional area(mm2) :
1 Core 1.5-800 25-800 25-1200 25-1200 35-1200 50-1200 50-1200 50-1200
2 Core 1.5-185 25-185
3 Core 1.5-400 25-400 25-400 25-400 35-400 50-400 50-400 50-400
4 Core 2.5-400 25-400
5 Core 2.5-400 25-400
Certificate
Contact Us
If you have more questions, please contact with Ellen Zhang.
Ellen Zhang
Phone: 86 150 0380 6907
Factory
Henan Hongda Cable Co., Ltd. located in No. 3, Changping Road, ZhanDian District, Jiaozuo, Wuzhi. Our factroy established in March of 2004. Our owns registered capital of RMB Fifty-one million six hundred and eighty thousand. Hongda Cable
covers an area of 100,000 square meters, including 50,000 square meters of building area. We have more than 120 staff members and professional workers. our fixed assets of 90,000,000. We can provide more than 100 varieties, tens of thousands of specifications of wire and cable, with 10000 km annual production capacity
Henan Hongda Cable Co. Ltd. is the original Zhengzhou Hongda Cable Co. Ltd. established enterprise expansion. The company is committed to system R&D, design, manufacturing, marketing and service of cable products,We mainly aim at managing cross-linking XLPE insulated power cables, PVC insulated power cables, plastic insulated control cables, insulated overhead cables, and stranded aluminum and ACSR. At present, the cables’ biggest cross area is 800 square meters with a maximum electric power of 35KV. The company has more than 300 (sets) domestic and oversea-leading production and testing equipment.
Packing and Transportation
We provide you with the best product packaging design services, thereby allowing you to save more shipping charges
FAQ
Q: Are you the factory or the trading company?
A: We are the factory.
Q: How long is your guarantee Period?
A: We uaually offer 1 year guarantee for our general products.
Q: How can I get the samples?
A: We can make the sample order. And usually we will charge for it.
But the samples fee will be return to you when you make the bulk order.
Q: Where is your factory? How can we visit your factory?
A: Our factory located in Zhengzhou city, Henan Province. You could reach here by train and by air.
We can pick you up in the airport and the railway station.
Q; What is your MOQ?
A: It`s base on the cable type or wire type. Please contact me. We will let you know.
- Next: 450/750V Cooper Conductor Yellow/Green Color Low Smoke Halogen Free Flame Retardant Xlpo Insulated Single Core 25mm Cable
- Previous: Safe and Reliable Flexible Electric Cable Wire
Contact us
Similar Or Related
- No related articles
-
