UL44 Xhhw Xhhw-2 Xhh Flame Retartant Cable

UL44 Xhhw Xhhw-2 Xhh Flame Retartant Cable

UL44 Xhhw Xhhw-2 Xhh Flame Retartant Cable

xhhw

UL

Red Yellow Green White Black Blue Black

XLPE

RNEDA

Standard Export Drum.

500mcm

China

85444930

Product Description

TOP TEN CABLE MANUFACTURER/EXPORTER IN CHINA
LARGEST CABLE MANUFACTUER IN NORTH CHINA
ANNUAL EXPORT VOLUME EXCEED 200MILLION USD
WITH UL,TUV,KEMA,CE,BV,PSB,SABS,LLOYD’S,GL,NK,KR,ABS PRODUCTS CERTIFICATIONS
ISO9001,ISO18001,OHSAS18001 SYSTEM CERTIFICATIONS
CNAS APPROVAL LABROTARY

UL44 XHHW XHHW-2 600V Cable with UL Certification

APPLICATIONS

XHHW building wire is intended for general purpose applications utilized in conduit and tubing underground in conduit, or other recognized raceways for services, feeders, and branch-circuit wiring as specified in the USA National Electrical Code (NEC). XHHW CU is permitted for 600-volt applications and can be used in wet locations at temperatures not to exceed 75ºC or dry locations at temperatures not to exceed90ºC. It’s suitable for applications requiring low-leaking circuits and a dielectric constant of 3.5 or less. With the special insulation, the wire requires no lubrication for installation.

2.STANDARDS
The following standards form a part of this specification to the extent specified herein:
2.1 Underwriters Laboratories Standard 44 for Rubber-Insulated Wires and Cables.
2.2 ICEA Pub. No. S-95-658, NEMA Pub. No. WC70 for Nonshielded Power Cables Rated 2000 Volts or Less.
2.3 Federal Specification J-C-30B.

3. CONDUCTORS
3.1 Conductors shall be Class B stranded annealed uncoated copper /8000Series Aluminum Alloy per UL Standard 44.

4. SEPARATOR
4.1 A suitable separator over the conductor may be used at the option of the manufacturer.

5. INSULATION
5.1 Each conductor shall be insulated with XLP, a crosslinked polyethylene complying with the physical and electrical requirements of UL Standard 44 for Type XHHW-2.
5.2 The average thickness of insulation, for a given conductor size, shall be as specified in UL Standard 44 for Type XHHW-2. The minimum thickness at any point shall be not less than 90% of the specified average thickness. The insulation shall be applied tightly to the conductor and shall be free-stripping.

6. IDENTIFICATION
6.1 The wire shall be identified by surface marking indicating manufacturer’s identification, conductor size and metal, voltage rating, UL Symbol and type designation.

7. TESTS
7.1 Wire shall be tested in accordance with the requirements of UL Standard 44 for Type XHHW-2.

8. LABELS
8.1 The wire shall bear the Underwriters Laboratories label for Type XHHW-2.

Size Stranding Conductor Diameter Insulation Thickness Overall Diameter Weight Ampacity at 90C *
AWG (inches) (inches) (inches) LBS/1000′ A
8 7 0.134 0.045 0.227 30 45
6 7 0.169 0.045 0.262 42 60
4 7 0.213 0.045 0.306 68 75
2 7 0.268 0.045 0.361 86 100
1 7 0.299 0.55 0.412 110 115
1/0 18 0.335 0.55 0.449 134 135
2/0 18 0.378 0.55 0.489 163 150
3/0 18 0.423 0.55 0.536 200 175
4/0 18 0.476 0.55 0.588 247 205
250 35 0.52 0.65 0.653 296 230
300 35 0.571 0.65 0.703 359 255
350 35 0.614 0.65 0.749 401 280
400 35 0.657 0.65 0.792 453 305
500 35 0.736 0.65 0.869 556 350
600 58 0.816 0.8 0.979 679 385
700 58 0.877 0.8 1.04 782 420
750 58 0.909 0.8 1.071 833 435
900 58 0.999 0.8 1.162 987 480
1000 58 1.059 0.8 1.223 1090 500

Packing and shipping

Company information

HeBei huatong wires&cables Group Co.,ltd.

which founded in1993,covers 15,000 square meters.With 400 sets of manufacturing machines and 200 pieces of equipment available for testing and inspecting,the company’s annual mannufacturi-ng capacity has reached 450 minllionUS dollars.

The enterprise has adapted international a-dvanced mannagement standards by fully implementing the accreditation of ISO9001Quality con-trol system, ISO1004 Envrionment management system,and OHSAS18001 Occupational health and safety management system.

Huatong’s products which consist of 15 series of cables and tens of thousands of specifications are widely used in different key national projects and industries .Our products are well liked by domestic and international customers that they have been exported to various countries and areas including the US,Netherlands, Italy,Russia,UK,Australia,Ethiopia,Ghaha,congo,Middle East ,and Southeast Asia.

\
FQ

(1).When can I get the price?

We usually quote within 6 hours after we get your inquiry. If you are very urgent to get the price, please call us or tell us in your e-mail so that we will regard your inquiry priority.

(2).How can I get a sample to check your quality?

After price confirmation, you can require for samples to check our quality. Sample is free, but the freight charge should be paid.

(3).How long can I expect to get the sample?

After you pay the freight charge and send us confirmed files, the samples will be ready for delivery in 3-7 days. The samples will be sent to you via express and arrive in 3~5 days. You can use your own express account orprepay us if you do not have an account.

(4).What about the lead time for mass production?

Honestly, it depends on the order quantity and the season you place the order.The best record we keep is delivering 10 kilometers cable within a week.

Tags: , ,

Contact us