Thhn/PVC, Gw Type Tc Power Cable 600V Vntc 4c12AWG Tc-Er

Thhn/PVC, Gw Type Tc Power Cable 600V Vntc 4c12AWG Tc-Er

Thhn/PVC, Gw Type Tc Power Cable 600V Vntc 4c12AWG Tc-Er

Type TC Tray Cable, VNTC Tray Cable, TC-ER Rated

Insulated

Stranded

Industrial

Bare Copper Wire, Tinned Copper

PVC

XLPE, PVC

Flat Wire, Round Wire

Building Wire

ISO9001, UL, CCC, RoHS

Renda

Power and Control Cable

Type Tc, Tc-Er Rated

UL66, UL1277, UL83

Low Voltage 600V, 2000V

Xhhw-2 Conductor, or Thhn Conductor

PVC, Sun Resistance, Oil Resistance

Max 90 Degree in Wet or Dry Locations

Yes

Icea S-58-679 Method 1, Table 2

Non-Halogen Available

RENDA

Roll, Reel, Coil as Your Requirements

18AWG, 16AWG, 14AWG, 10AWG, 8AWG, 6AWG, 4AWG, 2AWG

China

8544492100

Product Description

THHN/PVC, GW Type TC Power Cable 600V
VNTC 4C12AWG TC-ER

APPLICATION
Type TC Control Cable is for use in industrial power or control circuits where small diameter, flame retardant cables are desired. Primary installations include cable trays, raceways, and outdoor locations where supported by a messenger wire. Type TC is also listed for direct burial and for use in Class 1, Division 2 hazardous locations and Class 1 control circuits. Constructions with 3 or more conductors are listed for exposed runs (TC-ER) per NEC 336.10. Conductors may be used at temperatures not to exceed 75°C in wet locations or 90°C in dry locations.

Power Tray Cable Applications
  • Signal, control, power, lighting, or communication
  • Installation in raceways, direct burial, or outdoors (sunlight resistant)
  • Suitable for wet or dry locations, and in the presence of oil and most chemicals in accordance with NEC
  • Acceptable for use in Class 1, Division 2 hazardous locations

STANDARDS & REFERENCES
Type TC Control Cable meets or exceeds the applicable requirements of the following standards and
specifications:
• ASTM – (All applicable standards)
• UL 1277 Electrical Power and Control Tray Cables
• UL 83 Thermoplastic-insulate wire
• UL 44 Thermoset-insulated Wire
• UL 66 Fixture Wire
• NFPA 70 (NEC)
• UL 1581 Electrical Wires, Cables and Flexible Cords
• ICEA S-58-679 – Control Cable Conductor Identification Method 1, Table 2

Extended Run (ER) Rated
RoHS Compliant

CONSTRUCTION
Conductor: Stranded Tinned Copper,Bare Copper
Insulation:
1.Cross-linked polyethylene(XLPE) insulation with property of heat.Moistrure and abrasion resistance and flame retardant.Type XHHW-2 conductors.
2.polyvinyl chloride (PVC) insulation over which a nylon (polyamide).Type THHN conductors.
3.Size 18AWG 16AWGpolyvinyl chloride (PVC) insulation over which a nylon (polyamide). Type TFFN conductors.
Sheath:
1.sunlight resistant gray polyvinyl chloride (PVC).
2.flame retardant, moisture and sunlight resistant CPE jacket.
3.Non-halogen jacket available upon request.

Type TC Power Cable is manufactured using Type XHHW-2 conductors. Individual conductors are bare annealed copper covered with a flame retardant cross-linked polyethylene (XLP) insulation. Flame retardant wax paper fillers are added for roundness and a string binder is applied over the core assembly. The overall jacket consists of a flame retardant, moisture and sunlight resistant CPE jacket. PVC and Non-halogen jackets available upon request.

Type TC Control Cable is available in sizes 16 AWG through 10 AWG, with multiconductor constructions of two through 37 conductors. The product uses Type THHN or THWN conductors in sizes 14 AWG through 10 AWG and Type TFFN conductors is size 16 AWG. Individual conductors are bare annealed copper covered with a polyvinyl chloride (PVC) insulation over which a nylon (polyamide) or UL listed equal jacket is applied. The overall jacket consists of a heat, moisture and sunlight resistant PVC. Non-halogen jacket available upon request.

14AWG

Type Number of Conductors /size PVC insulated Jacket Thickness Overall Diameter Approximate Weight
n * AWG mm mm mm kg/km
TC-THHN 2 * 14AWG 0.38 1.14 8.5 102
TC-THHN 3 * 14AWG 0.38 1.14 9.0 130
TC-THHN 4 * 14AWG 0.38 1.14 9.7 161
TC-THHN 5 * 14AWG 0.38 1.14 10.5 193
TC-THHN 6 * 14AWG 0.38 1.14 11.3 226
TC-THHN 7 * 14AWG 0.38 1.14 11.3 249
TC-THHN 9 * 14AWG 0.38 1.52 14.9 360
TC-THHN 10 * 14AWG 0.38 1.52 14.9 382
TC-THHN 12 * 14AWG 0.38 1.52 15.4 435
TC-THHN 15 * 14AWG 0.38 1.52 16.9 530
TC-THHN 16 * 14AWG 0.38 1.52 16.9 553
TC-THHN 19 * 14AWG 0.38 1.52 17.7 636
TC-THHN 20 * 14AWG 0.38 1.52 18.7 677
TC-THHN 25 * 14AWG 0.38 1.52 20.6 829
TC-THHN 30 * 14AWG 0.38 2.03 22.7 1020
TC-THHN 37 * 14AWG 0.38 2.03 24.4 1219
12AWG
Type Number of Conductors/size PVC insulated Jacket Thickness Overall Diameter Approximate Weight
n * AWG mm mm mm kg/km
TC-THHN 2 * 12AWG 0.38 1.14 9.5 136
TC-THHN 3 * 12AWG 0.38 1.14 10.0 176
TC-THHN 4 * 12AWG 0.38 1.14 10.8 220
TC-THHN 5 * 12AWG 0.38 1.14 11.8 267
TC-THHN 6 * 12AWG 0.38 1.52 13.5 337
TC-THHN 7 * 12AWG 0.38 1.52 13.5 371
TC-THHN 9 * 12AWG 0.38 1.52 16.8 497
TC-THHN 10 * 12AWG 0.38 1.52 16.8 530
TC-THHN 12 * 12AWG 0.38 1.52 17.3 607
TC-THHN 15 * 12AWG 0.38 1.52 19.2 744
TC-THHN 16 * 12AWG 0.38 1.52 19.2 778
TC-THHN 19 * 12AWG 0.38 1.52 20.1 900
TC-THHN 20 * 12AWG 0.38 2.03 22.2 1010
TC-THHN 25 * 12AWG 0.38 2.03 24.5 1235
TC-THHN 30 * 12AWG 0.38 2.03 25.8 1440
TC-THHN 37 * 12AWG 0.38 2.03 27.8 1731

UL Certificate for TC, XHHW,SER,SEU,MC Cable

COMPANY INFORMATION
Hebei Huatong Wires and Cables Group Co., Ltd.It was established in 1993.
Hebei Huatong Wires and Cables Group Co., Ltd covers an area more than 220,000 square meters, owning more than 420 sets manufacturing equipment and more than 250 sets of testing equipment or apparatus. Our annual production capacity is 3 billionYuan.Now there are more than 1000 employers in our company, among which more than 150 are technicians.

TWO FACTORIES IN CHINA ! ONE FACTORY IN Tanzania!
Yearly Export Amount 200Millon

Our products are widely used in the field of electric power, coal, metallurgy, petrochemical industry, railway, national defense, construction, aviation and other national key projects.
We are top cable manufacture of rubber serious cables . Besides these,our submersible oil pump cable and shipboard cable are very influential in domestic, and, the traditional cables are also produced such as PVC power cables, XLPE power cables, ABC cables, wires, control cables, screened cables,communication cables, conductors.We are OEM for many USA, Europen, Australia cable company,70% of our products are exported, most customers are from developed countries. We got ISO,UL,TUV,KEMA,CE and many other certifications.

UL,TUV,KEMA,CE,BV,PSB,SABS,LLOYD’S,GL,NK,KR,ABS PRODUCTS CERTIFICATIONS

Certificates and"National Industrial Production License", "Certificate of Recommended Enterprises and Products for National Grid", "Adopting International Standard Certificate", and "High-Tech Enterprise Certificate", "Certificate of High Quality Products", "Certificate of Scientific and Technological Achievements", "Qualified Supplier Certificate", "China Classification Society Certificate of Works Approval", "Det Norske Veritas Type Approval Certificate", "Railway Product Certificate", "Safety Certificate of Approval for Mining Products", "National Mandatory Product Certification", "Certificate for China Compulsary Products Certification" and "Practical New-Type Patent Certificate".

Package Picture

Our Service
1.24years production experience and 15 years export experience .
2.Products certification :UL,CE,BV,TUV,KEMA,PSB,SABS,ABS,NK,LR,KR,GL etc
3.OEM service available based on official & legal authorization.
4.Strict quality control system.
5.Rapid delivery and feedback Faster lead time than our competitors.
6.Excellent quality with reasonable price.
7. Strong technical support (technical data, drawing, etc.)
8.Professional teamwork service for you actively.
9.Stock available, Free sample is available.

FAQ
1).When can I get the price?
We usually quote within 6 hours after we get your inquiry. If you are very urgentto get the price, please call us or tell us in your e-mail so that we will regard your inquiry priority.
(2).How can I get a sample to check your quality?
After price confirmation, you can require for samples to check our quality. Sample is free, but the freight charge should be paid.
(3).How long can I expect to get the sample?
After you pay the freight charge and send us confirmed files, the samples will be ready for delivery in 3-7 days. The samples will be sent to you via express and arrive in 3~5 days. You can use your own express account or prepay us if you do not have an account.
(4).What about the lead time for mass production?
Honestly, it depends on the order quantity and the season you place the order.The best record we keep is delivering 10 kilometers cable within a week. Generally speaking, we suggest that you start inquiry two months before the date you would like to get the products at your country.

Tags: , ,

Contact us