Stranded Copper Conductor XLPE Insulated Multipair Individual & Collective Screen Flame Retardant PVC Sheath Cable
Product Description
Application
For transmission of analogue and digital signals in instrument and control systems; use in zone 1 and zone 2 group
ΙΙ classified areas (IEC 60079 part 14). Not allowed for direct connection to low impedance source, e.g. the public
mains electricity supply.
Recommended for direct burial. For indoor and outdoor installation in dry and wet locations on racks, in conduits.
1. Conductor: Plain annealed copper, sizes: 0.5 mm² solid, 1.0 mm² solid, 0.5 mm² flexible, 0.75 mm² flexible or 1.5mm²
stranded
2. Insulation: Polyethylene PE
Colour code: black / blue;
with numbered tape under separator tape of the pair screen
3. Pair screen: 24 µm aluminium / PETP tape over tinned copper drain wire, 0.5 mm²
4. Collective screen: 24 µm aluminium / PETP tape over tinned copper drain wire, 0.5 mm²
5. Bedding: polyethylene PE, black
6. Armour: galvanized round steel wires
7. Outer sheath: Polyvinyl chloride PVC, black
*Flame retardant
*Oil resistant,
*Anti-rodent&termite
These properties could be offered upon requested.
Technical Data
Temperature range:
-40°C up to +70°C (during operation)
– 5°C up to +50°C (during installation)
Min. bending radius:
8 x cable-Ø
- Next: 19/33 (36) Kv 3X300mm2 Aluminum Conductor XLPE Insulated PVC Sheathed Armoured Power Cable BS-6622 IEC60502
- Previous: 12.7/22 (24) Kv 185 Sq. mm Single Core XLPE Insulated Aluminium Wire Armored Power Cable BS-6622 IEC-60502
Contact us
Similar Or Related
-
Flame Retardant Copper Conductor STA Armoured XLPE Insulated LV Power Cable 0.6/1kV 3X150+X1X95mm2
-
0.6/1kV 4Cx500mm2 Copper Conductor PVC Insulated SWA Armored LV Power Cable IEC 60502-1
-
4X185mm2 BS5467 Low Voltage Armoured Cable XLPE Insulated PVC Sheahted 600/1000V
-
4X240mm2 BS5467 Low Voltage Armoured Cable XLPE Insulated PVC Sheahted 600/1000V
-
4X150mm2 BS5467 Low Voltage Armoured Cable XLPE Insulated PVC Sheahted 600/1000V