Smico Products Electric Cable Accessories Wedge Dead End Anchor Clamp

Smico Products Electric Cable Accessories Wedge Dead End Anchor Clamp

Smico Products Electric Cable Accessories Wedge Dead End Anchor Clamp

PA2000, DR1500

Plastic

GB

Line Fittings

Tension Clamp

50-70mm2

Low Voltage 1kv

505g

10-13kn

Nylon Plus Fiber Glass PA66

SMICO

Export Carton

Anchoring clamp

China

8536909000

Product Description

                  PA2000 ABC Cable Aerial Electrical Fittings Anchoring Connector

 Introduction
 The anchoring clamp is designed to anchor LVABC lines with insulated neutral messenger.
 The stainlessteel flexible bail is equipped with an movable insulating saddle and the  two sleeves are compressed on the ends and locked on the clamp body. 

  Feature
 1.High mechanical stability
 2. Reduced dimensions for easier handling
 3. The cable gripping device avoids damage to sheath

 

MODEL CROSS-SECTION( mm2) Destructive
PA2000 50-70 10-13KN
DR1500 35-70 15-18KN

(Performance testing) 
2.1 Mechanical performance:the grip force of the wire clamp is 1/10 bigger than the break force of the lead. It comply with GB2314-1997 
2.2 Temperature rise performance: under the conditìon of big current, the temperature rise of connector is less than that of connection lead.
2.3 Heat circle performance:confirms to GB/T2317.3-2000,the beat circle trial standard for electric fitting. 
2.4 Waterproof insulatìon performance:confirms to the relevant requirements in Part 2 of GB/TI3140.4-1998, 
2.5 Resistance to corrosion performance: under the conditìon of SO, and salt fog, it can do three tìmes of fourteen days circle testìng. 
2.6 Environmental aging performance:under the circumstance of ultraviolet, radiation, dry and moist, expose if with change of temperature and beat impulse for six weeks. 
2.7 Fire-proof performance: insulation material of the connector withstands glowing filament test. Confirm to the requirements in Chapter4-1 0 of GBrr5169.4

Tags: , ,

Contact us

 

 

 

Success! Thanks for Your Request.
Error! Please Try Again.