RHH/RHW-2, Building Wire, 600 V, Cu/Xlp (UL 44)

RHH/RHW-2, Wire, 600 V, Cu/XLP (UL 44)

Underground Service Entrance Cable ? 600 Volts ? Oxygen Free Copper Conductor ? Dead Soft Annealed Cross-Linked Polyethylene (XLP) Insulation High-Heat and Moisture Resistant Sizes 6 through 4/0 AWG Also Rated SIS

Applications

? Pro-Line Type RHH or RHW-2 conductors are used with conduit as specified in the National Electrical Code1
? When used as RHH, conductor temperatures shall not exceed 90°C in dry locations
? When used as RHW-2 , conductor temperatures shall not exceed 90°C in wet or dry locations
? Voltage rating for RHH or RHW-2 conductors is 600 volts

Standards and References

Pro-Line Type RHH or RHW-2 meets or exceeds UL Standard 44 (for RHH or RHW-2).

Construction

? Pro-Line Type RHH or RHW-2 copper conductors are annealed (soft copper).
? Insulation is an abrasion, moisture, heat, and sunlight resistant black cross-linkedpolyethylene (XLP).

Specifications

PROLINESAFETY.COM / 800.554.3424
? Pro-Line Type RHH or RHW-2 or USE-2 conductors are used with conduit as specified in the National Electrical Code1
? When used as Type USE-2, conductor is suitable for use as underground service entrance cable for direct burial at conductor temperatures not to exceed 90°C
? When used as RHH, conductor temperatures shall not exceed 90°C in dry locations
? When used as RHW-2 or USE-2, conductor temperatures shall not exceed 90°C in wet or dry locations
? Voltage rating for RHH or RHW-2 or USE-2 conductors is 600 volts
RHH RHW-2 USE-2 COPPER BUILDING WIRE
Underground Service Entrance Cable ? 600 Volts ? Oxygen Free Copper Conductor ? Dead Soft Annealed
Cross-Linked Polyethylene (XLP) Insulation High-Heat and Moisture Resistant
Sizes 6 through 4/0 AWG Also Rated SIS
RHH RHW-2 USE- 2
1 of 2
Applications
Pro-Line Type RHH or RHW-2 or USE-2 meets or exceeds UL Standard 44 (for RHH or RHW-2), UL Standard 854 (for USE-2), Federal Specification A-A-59544, and requirements of the National Electrical Code.
Standards and References
? Pro-Line Type RHH or RHW-2 or USE-2 copper conductors are annealed (soft copper.
? Insulation is an abrasion, moisture, heat, and sunlight resistant black cross-linkedpolyethylene (XLP).
Construction
Conductors shall be UL-listed Type RHH or RHW-2, suitable for operation at 600 volts or less in wet or dry locations, including direct burial in the earth. Conductors shall be annealed copper, cross-linked polyethylene (XLP) insulated. Type RHH or RHW-2 shall be PRO-LINE WIRE & CABLE or approved equal.