PVC/PE/XLPE/Rubber/4 Core/Power Cable

PVC/PE/XLPE/Rubber/4 Core/Power Cable

PVC/PE/XLPE/Rubber/4 Core/Power Cable

Insulated

Stranded

Underground

Copper

XLPE

ISO9001, CE, CCC

JINSHUI

Drum

CE, ISO, CCC

Zhegnzhou Henan

Product Description

Specifications for 4 Core Cable :

PVC XLPE insulated power cable
1 IEC, ASTM, DIN, BS standard
2 ISO,CE,CCC certification
3 Response within 12 hours

Conductor for 4 Core Cable :

Standard and Property for Using
The XLPE insulated power cable can be produced according to our factory specification with the standard IEC60502. The factory can also design and manufacture special XLPE cable according to the other standards required by the customers. They not only have excellent electric, mechanical properties, but also have powerful resistance against chemical corrosion, heataging and environmental stress. Their structures are simple. The permissible maximum operating temperature is 90C. It is convenient for using, and they can be laid with no restriction of different elevation.

Reference Standards: IEC60502-1, IEC 60228, IEC60332 -1/2/3, BS6346, BS5467, BS6360, BS6724, VDE0276, AS/NZS 5000.1, etc.
Rated Voltage: 600/1000V (0.6/1kV)
Core Number: Single Core, Two Core, Three Core, Four Core, Five Core (1C, 2C, 3C, 4C, 5C)
Available Dimensions: 1.5mm2, 2.5mm2, 4mm2, 6mm2, 10mm2, 16mm2, 25mm2, 35mm2, 50mm2, 70mm2, 95mm2, 120mm2, 150mm2, 185mm2, 240mm2, 300mm2, 400mm2, 500mm2, 630mm2.
Codes Available: NYY, NAYY, N2XY, NA2XY, NYCY, NYCWY, NYBY, NAYBY, NYRY, NAYRY, N2XRY, N2XBY, NA2XBY, NA2XRY, N2XH, NA2XH,NHMH, NHXMH,
VV, VLV,YJV, YJLV, VV22, VLV22, YJV22, YJLV22, VV32, VLV32, YJV32, YJLV32, VV72, VLV72, YJV72,YJLV72
Application: To be laid indoors, in tunnel, cable furrow or pipe, underground. Steel tape armored cable could bear certain mechanical force, but it can't bear great pulling force. Steel wire armored cable is applicable to the well, water inside and fall in the bad soil, it can bear great pulling strength and mechanical forces.
Construction: It is recommended that the installation instructions indicated by the Local Electric Code, or any equivalent, be followed, so that the safeguarding of persons and the integrity of the product will not be affected during installation.
Conductor: Stranded round compacted copper or aluminum conductor (Cu / Al ), copper wire annealed.
Insulation: XLPE (Cross-Linked Polyethylene) or PVC (Polyvinyl Chloride)
Core Identification: 1 Core: Brown 
2 Cores: Brown, Blue
3 Cores: Brown, Black, Grey;
4 Cores: Blue, Brown, Black, Grey 
5 Cores: Green/Yellow, Blue, Brown, Black, Grey
Alternative core identification: White Cores with Black numbers
Filler: Polypropylene filament with lapped binding tape
Separator: Binding tape
Bedding: PVC (Polyvinyl Chloride) or LSZH.
Armouring: Single Core: Aluminium Wire Armoured (AWA)
Multi-core: Steel Wire Armoured (SWA) or Steel Tape Armoured (STA)
Sheath: PVC (Polyvinyl Chloride), flame retardant PVC, PE, LSOH, HFFR
Colour: Black
Temperature Rating: 0°C to 90°C (XLPE), 0°C to 70°C (PVC)During short circuit (lasting less than 5 seconds) the maximum temperature of the cable conductor shall not be above 250°C (160°C for PVC)Environment temperature should be no lower than 0°C for laying the cable.
Minimum Bending Radius: Single Core Cable: Non Armored Cable 20D, Armored Cable 15D
Cores Cable: Non Armored Cable 15D, Armored Cable 12D.
Remarks: D means practical external diameter of the cable
Code Construction 0.6/1kV (Single Core, 2C, 3C, 3C+1C, 3C+2C, 4C, 4C+1C, 5C) Low Voltage Power Cable Description

Tags: , ,

Contact us

 

 

 

You May Like

Product List