PVC Insulated and Sheath for Nym Cable
Product Description
NVV cable suitable for household and industrial usage.
Application:
NVV cable suitable for household and industrial usage. Laid on or under plaster, in walls or concrete, without special mechanical protection, but not in dry or pre-stressed concrete. Suitable for dry, same as damp or wet environment; for internal or external application (only if the NVV cable is protected against direct sunlight).
Standards:HRN HD 21.4 S2, IEC 60227-4, DIN VDE 0250 part 204
Construction:
Conductor: bare copper conductor acc. to IEC 60228 / HD 383 / DIN VDE 0295
class 1: solid (RE construction)
class 2: multi wire stranded (RM construction)
Insulation: PVC compound TI1 acc. to DIN VDE 0281 part 1 / HD 21.1 S4
Filler: cores enveloped in non-vulcanized rubber or plastic compound
Sheath: PVC compound TM1 acc. to DIN VDE 0281 part 1 / HD 21.1 S4
sheath colour: grey (RAL 7035)
Technical data:
Temperature range:
during installationi: +5 °C up to +70 °C
fixed installed: -30 °C up to +70 °C
at short circuit of max. 5 s: up to 150 °C
Nominal voltage: Uο/U = 300/500 V
Ispitni napon: 2000 V
Minimal inner bending radius: 6D
Behaviour in fire: IEC 60332-1
Technical characteristics:
Dimensions – number of cores x conductor cross-section | Construction | Construction of individual conductor | External diameter | Conductor resistance at 20 °C | Specific. el. resistance of insulation at 70 °C | Short circuit current 1s | Permited tensile load | Cable weight | Packing |
nominal | min-max. | max. | min. | nominal | max. | cca | |||
mm² | n x mm | mm | Ω/km | MΩkm | kA | N | kg/km | ||
1 x 1,5 | RE | 1 x 1,38 | 5,2 – 6,2 | 12,10 | 0,0100 | 0,17 | 75 | 45 | CUT |
1 x 2,5 | RE | 1 x 1,78 | 5,8 – 6,8 | 7,41 | 0,0094 | 0,29 | 125 | 70 | CUT |
1 x 4 | RE | 1 x 2,26 | 6,4 – 7,6 | 4,61 | 0,0087 | 0,46 | 200 | 80 | CUT |
1 x 6 | RE | 1 x 2,70 | 6,8 – 8,2 | 3,08 | 0,0074 | 0,69 | 300 | 105 | CUT |
1 x 10 | RE | 1 x 3,5 | 8,0 – 9,4 | 1,83 | 0,0072 | 1,15 | 500 | 155 | CUT |
1 x 16 | RM | 7 x 1,70 | 9,4 – 11,0 | 1,15 | 0,0053 | 1,84 | 800 | 230 | CUT |
1 x 25 | RM | 7 x 2,13 | 12,2 – 13,3 | 0,73 | 0,0051 | 2,88 | 1250 | 325 | CUT |
2 x 1,5 | RE | 1 x 1,38 | 8,4 – 9,8 | 12,10 | 0,0100 | 0,17 | 150 | 115 | c.100 |
2 x 2,5 | RE | 1 x 1,78 | 9,6 – 11,0 | 7,41 | 0,0094 | 0,29 | 250 | 190 | c.100 |
2 x 4 | RE | 1 x 2,26 | 11,0 – 12,5 | 4,61 | 0,0087 | 0,46 | 400 | – | CUT |
3 x 1,5 | RE | 1 x 1,38 | 8,8 – 10,5 | 12,10 | 0,0100 | 0,17 | 225 | 135 | c.50, c.100 |
3 x 2,5 | RE | 1 x 1,78 | 10,0 – 11,5 | 7,41 | 0,0094 | 0,29 | 375 | 190 | c.100, B500 |
3 x 4 | RE | 1 x 2,26 | 11,5 – 13,0 | 4,61 | 0,0087 | 0,46 | 600 | 265 | CUT |
3 x 6 | RE | 1 x 2,70 | 12,0 – 15,0 | 3,08 | 0,0074 | 0,69 | 900 | 315 | CUT |
3 x 10 | RE | 1 x 3,5 | 16,0 – 18,0 | 1,83 | 0,0072 | 1,15 | 1500 | 465 | CUT |
4 x 1,5 | RE | 1 x 1,38 | 9,5 – 11,0 | 12,10 | 0,0100 | 0,17 | 300 | 160 | c.100 |
4 x 2,5 | RE | 1 x 1,78 | 11,0 – 12,5 | 7,41 | 0,0094 | 0,29 | 500 | 230 | c.100 |
4 x 4 | RE | 1 x 2,26 | 12,5 – 14,5 | 4,61 | 0,0087 | 0,46 | 800 | 330 | c.100, CUT |
4 x 6 | RE | 1 x 2,70 | 14,5 – 16,5 | 3,08 | 0,0074 | 0,69 | 1200 | 460 | c.50, CUT |
4 x 10 | RE | 1 x 3,5 | 16,5 – 19,0 | 1,83 | 0,0072 | 1,15 | 2000 | 690 | CUT |
4 x 16 | RM | 7 x 1,70 | 20,5 – 23,5 | 1,15 | 0,0053 | 1,84 | 3200 | 1090 | CUT |
4 x 25 | RM | 7 x 2,13 | 25,0 – 28,5 | 0,73 | 0,0051 | 2,88 | 5000 | 1640 | CUT |
4 x 35 | RM | 7 x 2,52 | 27,5 – 32,0 | 0,52 | 0,0045 | 4,02 | 7000 | 2090 | CUT |
5 x 1,5 | RE | 1 x 1,38 | 9,9 – 12,0 | 12,10 | 0,0100 | 0,17 | 375 | 190 | c.100, dr500 |
5 x 2,5 | RE | 1 x 1,78 | 11,5 – 13,5 | 7,41 | 0,0094 | 0,29 | 625 | 270 | c.100, dr500 |
5 x 4 | RE | 1 x 2,26 | 14,0 – 16,5 | 4,61 | 0,0087 | 0,46 | 1000 | 410 | c.100, CUT |
5 x 6 | RE | 1 x 2,70 | 15,5 – 18,0 | 3,08 | 0,0074 | 0,69 | 1500 | 540 | c.50, CUT |
5 x 10 | RE | 1 x 3,5 | 18,0 – 21,0 | 1,83 | 0,0072 | 1,15 | 2500 | 850 | CUT |
5 x 10 | RM | 7 x 1,35 | 18,5 – 21,5 | 1,83 | 0,0065 | 1,15 | 2500 | 870 | CUT |
5 x 16 | RM | 7 x 1,70 | 22,5 – 26,0 | 1,15 | 0,0053 | 1,84 | 4000 | 1350 | CUT |
5 x 25 | RM | 7 x 2,13 | 27,5 – 31,5 | 0,73 | 0,0051 | 2,88 | 6250 | 1990 | CUT |
7 x 1,5 | RE | 1 x 1,38 | 11,0 – 13,0 | 12,10 | 0,0100 | 0,17 | 525 | 235 | c.100, CUT |
10 x 1,5 | RE | 1 x 1,38 | 13,9 – 15,6 | 12,10 | 0,0100 | 0,17 | 750 | 330 | CUT |
12 x 1,5 | RE | 1 x 1,38 | 14,2 – 16,1 | 12,10 | 0,0100 | 0,17 | 900 | 400 | CUT |
7 x 2,5 | RE | 1 x 1,78 | 12,7 -14,3 | 7,41 | 0,0094 | 0,29 | 875 | 350 | CUT |
*) Construction: RE = single wire round conductor RM = multi wire round conductor
**) Packing: c.50 = coil 50 m, c.100 = coil 100 m, d.500 = drum 500 m
- Next: 600V Thhn/Thwn Wire 12AWG 8AWG
- Previous: 450/750V AS/NZS TPS Cable Flat Cable for Australia Market