Power Transmitting Al/Al Alloy/Cu Conductor XLPE ABC Cable 16mm2
Product Description
Aerial Bundled Conductor (ABC) Cables
Aerial Bundle Cable (ABC cable) is a very innovative concept for overhead power distribution as compared to the conventional bare conductor overhead distribution system.
It provides higher level of safety and reliability, lower power losses and ultimate system economy by reducing installation, maintenance and operative cost.
Caledonian LV Aerial Bundle Cables are designed to supply 600/1000 volt aerial service for temporary service at construction sites, as a service drop (power pole to service entrance), as a secondary cable (pole to pole) or street lighting.
This over-head cable provides reinforced insulation acc. IEC 61140 and fulfill therefore Class II acc. IEC 61140. It is not flame retardant. But this could be if requested change to a flame retardant cable
Construction
Insulation XPLE compound, UV-resistant.
Core Identification 1, 2 resp. 3 raised longitudinal ribs on the surface of the cores. The surface of the neutral core should have at least 12 ribs for cross-sections up to 50 mm^2 and a minimum of 16 ribs for cores above 50 mm^2. In the case of five core bundles the surface of the protective core should be smooth.
|
Type
|
Designation
|
Rated Voltage
|
No.of cores
|
Nominal cross section (mm²)
|
|
JKV
|
Copper conductor PVC insulated aerial cable
|
0.6/1KV
|
1,2,4,3+k
|
16-240
|
|
JKLV
|
Aluminum conductor PVC insulated aerial cable
|
16-240
|
||
|
JKY
|
Copper conductor PE insulated aerial cable
|
16-240
|
||
|
JKLY
|
Aluminum conductor PE insulated aerial cable
|
16-240
|
||
|
JKYJ
|
Copper conductor XLPE insulated aerialcable
|
16-240
|
||
|
JKLYJ
|
Aluminum conductor XLPE insulated aerial cable
|
16-240
|
|
Nom.Cross sec(mm²)
|
Insulation Thickness(mm)
|
Outer Diameter Approx.(mm)
|
Conductor Resistance at 20 ºC(Ω/KM)
|
Test Voltage(KV/min)
|
Breaking Load(N)
|
Permissible ampacity at 25ºC(In Air)(A)
|
|
10
|
1
|
6
|
≤3.08
|
3.5/1
|
≥1650
|
65
|
|
16
|
1.2
|
7.4
|
≤1.91
|
3.5/1
|
≥2517
|
86
|
|
25
|
1.2
|
8.5
|
≤1.20
|
3.5/1
|
≥3762
|
111
|
|
35
|
1.4
|
9.8
|
≤0.868
|
3.5/1
|
≥5177
|
128
|
|
50
|
1.4
|
11.1
|
≤0.641
|
3.5/1
|
≥7011
|
154
|
|
70
|
1.4
|
12.8
|
≤0.443
|
3.5/1
|
≥10354
|
193
|
|
95
|
1.6
|
14.8
|
≤0.320
|
3.5/1
|
≥13727
|
236
|
|
120
|
1.6
|
16.2
|
≤0.253
|
3.5/1
|
≥17339
|
274
|
|
150
|
1.8
|
17.8
|
≤0.206
|
3.5/1
|
≥21033
|
316
|
|
185
|
2
|
20.2
|
≤0.164
|
3.5/1
|
≥26732
|
355
|
|
240
|
2.2
|
22.8
|
≤0.125
|
3.5/1
|
≥34679
|
419
|
|
300
|
2.2
|
25
|
≤0.100
|
3.5/1
|
≥43349
|
526
|
|
400
|
2.2
|
28
|
≤0.0778
|
3.5/1
|
≥55707
|
599
|
The basic construction is as follows:
3 power cores consisting of standard aluminium conductors, insulated withXLPE insulation
+ One sheath lighting aluminium conductor with XLPE insulation(optional)
+ One messenger Al-alloy conductor (bare or covered)
The messenger conductor can be of galvanised steel wire also.
The purpose of messenger wire is
A) It acts as load bearing wire.
B) It acts as earth or neutral conductor.
To be used at cotages of 600V phase-to-phase or less and at conductor temperatures not to exceed 75oC for polyethylene insulated conductors or 90oC for crossliked polyethylene(XLPE) insulated conductors.
Standards:
(1). BS 7870-5: Part 5: Polymeric insulated aerial bundled conductors (ABC) of rated voltage 0.6/1 kV for overhead distribution
Packaging&Delivery
Packaging Details:Wooden drums,steel wooden drums or as your requirement
Delivery Time:Normally within 10 days (detailly depend on the order quantity)
Contact us
Looking forward to cooperation with you.If you have any question or need our certification and sample.Pls contact me freely.You can talk with me by Email or chat software.
Tel :+86 18339931106
- Next: Alambre Desnudo AAAC 312.8 Butte Bare Conductor 19/3.26mm
- Previous: AAAC Bare Conductor XLPE Alambre Triplex 2/0 4/0 Service Drop Cable
Contact us
Similar Or Related
- No related articles
-
Power Transmitting Al/Al Alloy/Cu Conductor XLPE ABC Cable 16mm2
