Nyy Nyy-J Nyy-O Nayy (N) Ay2y Nycy N2xy Na2xy N2xsy Ba2xsy 2xsy A2xsy N2xsey Na2xsey 2xsey A2xsey 2xsey Cable
Product Description
NYY NYY-J NYY-O NAYY (N)AY2Y NYCY N2XY NA2XY N2XSY BA2XSY 2XSY A2XSY N2XSEY NA2XSEY 2XSEY A2XSEY 2XSEY Cable:
Top ten cable manufacturer in China
Professional OEM manufacturer
WITH UL,TUV,KEMA,CE,BV,PSB,SABA CERTIFICATIONS
WITH TUV TYPE TESTING REPORT
ISO9001,ISO18001,OHSAS18001
1 Product Standard
This product is manufactured according to GB/T12706.1, equivalent to IEC60502.1. Or BS, DIN, ICEA standard as customer request.
2 Application
The product is suitable for power transmission and distribution lines with rated power frequency voltage up to and including 0.6/1KV.
Operating Performance
1). Rated power frequency voltage Uo/U: 0.6/1KV.
2). Max. Permissible continuous operating temperature of conductor: 90ºC
3). Max. Short-circuit temperature of the conductor shall not exceed: (5S maximum duration) 250ºC
4). The ambient temperature under installation should not below 0ºC
5). The bending radius of a cable should not be less than 15 times of the cable diameter.
6). The test voltage (A.C.): 3.5kV/5min.
7). The flame-retardant properties of cable comply with grade A, B, C of GB/T19666-2005 or IEC60332.
3 Construction:
Conductor: Solid or stranded copper,aluminum
Insulation: Cross-linked polyethylene( XLPE or PVC)
Circuit Identification: The insulation shall be red, black
Filler: Polypropylene lament with lapped binding tape
Inner Sheath: Polyvinyl chloride (Black)
Armor: Galvanized steel wire
Core-covering: Binding tape
Outer Sheath: Polyvinyl chloride (Black)
Package: Wooden Drum Package or Iron-wooden drum
4. Standards of MV XLPE Insulated Electrical Power Supply Power Station Cable
The cable is manufactured according to IEC 60502.2, IEC 60502.1, AS/NZS 1429.1, AS/NZS 5000.1, BS 6622/7835, BS 5467, BS 6746, BS 6346, VDE 0276, ASTM, ABNT etc. It is suitable to be installed in the power line with rated voltage from (U0/U)0.6/1kV to 19/33kV for power transmission.
5. Application of MV XLPE Insulated Electrical Power Supply Power Station Cable
The electric cable is applied to transmit and distribute power in power transmission and distribution system of 1kV~35kV or lower. It is widely adopted in the fields including power, construction, industry, mines, metallurgy, petrochemical industry and communication in complete replace of oil immersed paper insulated power cable and in partial re-place of PVC insulation or XLPE power cable.
Type | Description | Applications |
N2XY/N2XSEY NA2XY/NA2XSEY |
Cu or AL conductor XLPE insulated PVC sheathed power cables. | For laying indoors, in tunnels, in ducts. Able to bear extermal mechanical force but not large pulling forces. Single core cables are impermissible to be laid in magnetic ducts. |
N2X2Y/N2XSE2Y NA2X2Y/NA2XSE2Y |
Cu or AL conductor XLPE insulated PE sheathed power cables. | |
N2XBY/N2XSEBY NA2XBY/NA2XSEBY |
Cu or AL conductor XLPE insulated PVC sheathed internal steel tape armoured power cables. | For laying indoors, in tunnels, in ducts and underground. Able to bear extermal mechanical force but not large pulling forces, Impermissible to use single core cable in A.C circuit. |
N2XB2Y/N2XSEB2Y NA2XB2Y/NA2XSEB2Y |
Cu or AL conductor XLPE insulated PE sheathed internal steel tape armoured power cables. | |
N2XRY/N2XSERY NA2XRY/NA2XSERY |
Cu or AL conductor XLPE insulated PVC sheathed internal steel wire armoured power cables. | For laying in underground areas along route with large difference of elevation, in shafts and in water, able to bear a corresponding pulling forces and external mechanical forces. |
N2XR2Y/N2XSER2Y NA2XR2Y/NA2XSER2Y |
Cu or AL conductor XLPE insulated PE sheathed internal steel wire armoured power cables. |
- Next: 11kv Copper Cable Steel Wire Armored Cable 3X95mm
- Previous: ACSR Conductor for Overhead Power Transmission, BS, ASTM, DIN Standards