Nyry, Power Cable, 0.6/1 Kv, 1/C, Cu/PVC/PVC/Awa/PVC (IEC 60502-1)

Nyry, Power Cable, 0.6/1 Kv, 1/C, Cu/PVC/PVC/Awa/PVC (IEC 60502-1)

Nyry, Power Cable, 0.6/1 Kv, 1/C, Cu/PVC/PVC/Awa/PVC (IEC 60502-1)

NYRY

Insulated

Stranded

Underground

Copper

PVC

PVC

Round Wire

Underground

ISO9001, CE, CCC

Boan

0.6/1 Kv

2

1

10-630 Mm2

Aluminum Wire

DingAn or OEM

Heated Steel-Wooden Drum/Steel Drum

SGS

Jiangsu Yixing, China

8544492100

Product Description

NYRY, 0.6/1 KV, 1/C, CU/PVC/PVC/AWA/PVC, Power Cable (IEC 60502-1)
Application:
These cables are used for electricity supply in low voltage installation system, They are suitable for installation in indoors and outdoors, in cable ducts, under ground, in power and switching stations, local energy distributions, industrial plants, where there is no risk of mechanical damage.

Construction:
Conductors Copper or Aluminium conductor, round standed or Shaped, Class 2 to IEC 60228. For smaller sizes, a solid round conductor, Class 1 as per IEC 60228, can also be supplied upon request. Insulation PVC Insulation material and thickness shall be as per IEC 60502-1. PVC material shall be Type A as per IEC 60502-1 or. PVC Insulation material as per SASO 1694 rated for 85° C continuous operation is also available upon special request.
Colour Code Colour Code (1):
1 Core: Red or Black
2 Cores: Red, Black
3 Cores: Red, Yellow, Blue
4 Cores: Red, Yellow, Blue, Black
5 Cores: Red, Yellow, Blue, Black, Green
Above 5 Cores: Black Cores with White numerals
Colour Code (2):
1 Core: Brown or Blue
2 Cores: Brown or Blue
3 Cores: Brown, Black, Grey
4 Cores: Blue, Brown, Black, Grey
5 Cores: Green/Yellow, Blue, Brown, Black, Grey
Above 5 Cores: Black Cores with White numerals
Assembly / Two, Three or Four insulated conductors are laid-up together with non-hygroscopic Inner Sheath fillers and the assembly is bedded with an extruded layer of PVC. In case of non-
Armoured cables, this layer may be omitted
Armour Aluminum/Galvanized Steel Wires applied helically over the bedding as per IEC 60502. Single core cables shall be Aluminium wire armour. Aluminum/Steel Tapes applied helically over the bedding of multi-core cables as per IEC 60502.
Outer Sheath Outer sheath shall be of Extruded PVC Type ST2 as per IEC 60502-1.
Special type of PVC sheathing material such as Fire Retardant PVC, Anti-Termite PVC, Anti-Rodent PVC, Sunlight resistant PVC, Oil Resistant PVC are available on special request. Also, special sheathing materials such as LLDPE, MDPE, HDPE, LSF, CPE are available on request.
Fire Performance of Cable Sheaths Cables can be supplied with special flame retardant PVC outer sheath to comply with the flame test requirements of IEC 60332-3-22, IEC 60332-3-23 and IEC 60332-3-24, can also supply cables with Low Smoke Halogen Free (LSHF) material according to IEC 60502-1, BS 7211, BS 6724 or other equivalent standards.

Section Conductor Diameter Insulation Thickness Bedding Thickness Armour Diameter Sheath Thickness Overall Diameter Cable Weight
No.xmm² mm mm mm mm mm mm Kg/Km
Single Core PVC Insulated AWA Armoured Power Cable
1×10 4 1 1 0.8 1.8 14 300
1×16 5 1 1 0.8 1.8 15 375
1×25 6.3 1.2 1 0.8 1.8 16 500
1×35 7.4 1.2 1 0.8 1.8 18 625
1×50 8.8 1.4 1 1.25 1.8 20 835
1×70 10.6 1.4 1 1.25 1.8 22 1075
1×95 12.4 1.6 1 1.25 1.8 24 1385
1×120 14 1.6 1 1.6 1.8 26 1700
1×150 15.5 1.8 1 1.6 1.8 28 2025
1×185 17.4 2 1 1.6 1.8 31 2450
1×240 20.3 2.2 1 1.6 1.9 34 3100
1×300 22.7 2.4 1 2 2 38 3900
1×400 25.4 2.6 1.2 2 2.1 42 4875
1×500 28.8 2.8 1.2 2 2.2 45 6050
1×630 30.4 2.8 1.2 2 2.4 50 7625

Tags: , ,

Contact us