Multi-Core General Rubber Flexible Mine Cable (3-6+1-6)
Product Description
Multi-core CU AL AAAC General Rubber Sheath Flexible Cable 16mm2 25mm2 35mm2 50mm2 70mm2 95mm2
Application of welding cable
Welding Cables are flame retardant, oil resistant, resilient, resists compression cuts and abrasion,
durable, and survives rough handling. Designed for use as arc welding leads from the secondary side of the power
source, typical of welders and welding generators. Not for primary voltage.
Construction of welding cable
Welding Cables are manufactured using annealed rope-stranded bare copper conductor as per ICEA
S-75-381. A paper tape separates the conductor insulation. A medium-duty EPR jacket is extruded onto the
cable. EP or Hypalon jackets are available. 600 volt spark tested.
Standard of welding cable
ASTM B-3 ASTM B1732, ICEA S-175-381, IEC 254-1.
Specification of welding cable
Medium Duty jacket made accordance with ICEA S-75-381 – Portable and Power Feeder Cables for Use in
Mines and Similar Locations or IEC 245-1
600 Volt Spark tested
Technical data of welding cable
| Conductor Nominal Section (mm2) | Conductive Core | Thickness of Section Sheath (mm) | Average Outer Diameter (mm2) | 200C Conductor Resistance≤(Ω/km) | |
| Number/Diameter of Core(mm) | Min | Max | |||
| 10 | 322/0.20 | 1.8 | 7.5 | 9.7 | 1.91 |
| 16 | 513/0.20 | 2.0 | 9.2 | 11.5 | 1.16 |
| 25 | 798/0.20 | 2.0 | 10.5 | 13.0 | 0.758 |
| 35 | 1121/0.20 | 2.0 | 11.5 | 14.5 | 0.536 |
| 50 | 1596/0.20 | 2.2 | 13.5 | 17.0 | 0.379 |
| 70 | 2214/0.20 | 2.4 | 15.0 | 19.5 | 0.268 |
| 95 | 2997/0.20 | 2.6 | 17.0 | 22.0 | 0.198 |
| 120 | 1702/0.30 | 2.8 | 19.0 | 24.0 | 0.161 |
| 150 | 2135/0.30 | 3.0 | 21.0 | 27.0 | 0.129 |
| 185 | 1443/0.40 | 3.2 | 22.0 | 29.0 | 0.106 |
- Next: Copper / Aluminum XLPE Insulated Steel Tape Armoured Power Cable
- Previous: Copper Wires Screen Control Cable
