LV 3X240+3X35mm2 Mv 3X240mm2 Sta Power Cable for Underground

Product Name:

Model NO.:

Cu/XLPE/STA/PVC

Application:

Underground

Voltage:

Low and Medium Voltage Cable

Current:

DC Cable

Insulation Material:

XLPE

Sheath Material:

PVC

Material Shape:

Round Wire

Wire Core Material:

Copper Conductor

Certification:

ISO, CCC, CE

Model:

Cu/XLPE/Sta/PVC

Brand:

Hongda

Core:

3 Cores

Trademark:

Hongda

Transport Package:

Wooden Drum or Steel Wooden Drum

Origin:

Zhengzhou China

HS Code:

8544492100

Product Description

LV 3×240+3x35mm2 MV 3x240mm2 STA power cable for underground
Application
PVC Insulated and Sheathed Power Cable are suitable to be laid for distribution line with A.C.50HZ and rated voltage up to 1kV. With the characteristics of stable capability, advanced technology, broad material resources, low price, good flexible and easy to lay and maintain.

Property
1.The long-term permissible operation temperature of the conductor shall not be higher than 70ºC.
2. Conductor maximum short circuit((less than 5 second) temperature shall not be higher than 160ºC.
3. The cable is not limited by drop in level when being laid, and the environment temperature shall not be lower than 0ºC.
4. Perfect chemical stability, resistant against acids, alkalis, grease and organic solvents,and flame retardance.
5. Light weight, perfect bending properties, installed and maintained easily and conveniently.

Construction
0.6/1kV Single Core or Multi Cores, Circular Compacted Al or Cu/PVC/PVC armoured or Un-Armoured Power Cable.

	No. x Nominal Cross Section of Conductor No. x mm2
	1 core	2 cores	3 cores	3+1 cores	4 cores	3+2 cores	4+1 cores	5 core
0.6/1 kV Low Voltage PVC/XLPE insulated Power Cable	1×4 mm2	2x4mm2	3×4 mm2	3×4 mm2 +2.5mm2	4×4 mm2	3×4 mm2 + 2×2.5mm2	4×4 mm2+ 2.5mm2	5×2.5mm2
	1×6 mm2	2x6mm2	3×6 mm2	3×6 mm2 + 4 mm2	4×6 mm2	3×6 mm2 + 2×4 mm2	4×6 mm2 + 4 mm2	5×4 mm2
	1×10 mm2	2x10mm2	3×10 mm2	3×10 mm2 + 6 mm2	4×10 mm2	3×10 mm2 + 2×6 mm2	4×10 mm2+ 6 mm2	5×6 mm2
	1×16 mm2	2x16mm2	3x16mm2	3×16 mm2 + 10 mm2	4×16 mm2	3×16 mm2 + 2×10 mm2	4×16 mm2+10 mm2	5×10 mm2
	1x 25 mm2	2x 25mm2	3x 25 mm2	3×25 mm2 + 16mm2	4×25 mm2	3×25 mm2 + 2x16mm2	4×25 mm2+16mm2	5×16 mm2
	1×35 mm2	2x35mm2	3x 35 mm2	3×35 mm2 + 16mm2	4×35 mm2	3×35 mm2 + 2x16mm2	4×35 mm2+16mm2	5×25 mm2
	1×50 mm2	2x50mm2	3x 50 mm2	3×50 mm2 + 25mm2	4×50 mm2	3×50 mm2 + 2x25mm2	4×50 mm2+25mm2	5×35 mm2
	1×70 mm2	2x70mm2	3x 70 mm2	3×70 mm2 + 35mm2	4×70 mm2	3×70 mm2 + 2x35mm2	4×70 mm2+35mm2	5×50 mm2
	1×95 mm2	2x95mm2	3x 95 mm2	3×95 mm2 + 50mm2	4×95 mm2	3×95 mm2 + 2x50mm2	4×95 mm2+50mm2	5×70 mm2
	1×120 mm2	2x120mm2	3x 120 mm2	3x120mm2 + 70mm2	4×120 mm2	3x120mm2 + 2x70mm2	4x120mm2+70mm2	5×95 mm2
	1×150 mm2	2x150mm2	3x 150 mm2	3x150mm2 + 70mm2	4×150 mm2	3x150mm2 + 2x70mm2	4x150mm2+70mm2
	1×185 mm2	2x185mm2	3x 185 mm2	3x185mm2 + 95mm2	4×185 mm2	3x185mm2 + 2x95mm2	4x185mm2+ 95mm2
	1×240 mm2	2x240mm2	3x 240 mm2	3x240mm2 + 120mm2	4×240 mm2	3x240mm2 + 2x120mm2	4x240mm2+120mm2
	1×300 mm2		3x 300 mm2	3x300mm2 + 150mm2	4×300 mm2	3x300mm2 + 2x150mm2	4x300mm2+150mm2
	1×400 mm2
	1×500 mm2
	1×630 mm2

Conductor shaped RE=circular solid,CC=compacted circular stranded,SM=sector shaped stranded
Conductors Plain circular, compacted or shaped stranded copper or aluminium conductor
Insulation XLPE (cross-linked polyethylene) rated at 90°C
Colour identification
1 Core Red or Black
2 Cores Red, Black
3 Cores Red, Yellow, Blue
4 Cores, Red, Yellow, Blue, Black
5 Cores, Red, Yellow, Blue, Black, Green
Above 5 Cores Black Cores with White numerals
The above identifying can be changed as order
Assembly /Inner Sheath Two, Three or Four insulated conductors are laid-up together with non-hygroscopic fillers and the assembly is bedded with an extruded layer of PVC. In case of non-armoured cables, this layer may be omitted
Armour Aluminum/Galvanized Steel Wires, single core cables shall be Aluminium wire armour, Aluminum/Steel Tapes applied helically over the bedding of multi-core cables as per IEC 60502.
Outer Sheath Outer sheath shall be of Extruded PVC Type ST2 as per IEC 60502-1 or Type 9 as BS 6346/5467.Special type of PVC sheathing material such as Fire Retardant PVC, Anti-Termite PVC, Anti-Rodent PVC, Sunlight resistant PVC, Oil Resistant PVC are available on special request. Also, special sheathing materials such as LLDPE, MDPE, HDPE, LSZH, and CPE are available on request.

Standards
GB/12706-2008, IEC60502-1,IEC 60228,IEC60332 BS 5467,IS 1554 , IS 7098 ect.
we can also design and produce for special application requirement.

Certificate

Contact Us
If you have more questions, please contact with Ellen Zhang.
Ellen Zhang
Phone: 86 150 0380 6907

Factory

Henan Hongda Cable Co., Ltd. located in No. 3, Changping Road, ZhanDian District, Jiaozuo, Wuzhi. Our factroy established in March of 2004. Our owns registered capital of RMB Fifty-one million six hundred and eighty thousand. Hongda Cable
covers an area of 100,000 square meters, including 50,000 square meters of building area. We have more than 120 staff members and professional workers. our fixed assets of 90,000,000. We can provide more than 100 varieties, tens of thousands of specifications of wire and cable, with 10000 km annual production capacity
Henan Hongda Cable Co. Ltd. is the original Zhengzhou Hongda Cable Co. Ltd. established enterprise expansion. The company is committed to system R&D, design, manufacturing, marketing and service of cable products,We mainly aim at managing cross-linking XLPE insulated power cables, PVC insulated power cables, plastic insulated control cables, insulated overhead cables, and stranded aluminum and ACSR. At present, the cables’ biggest cross area is 800 square meters with a maximum electric power of 35KV. The company has more than 300 (sets) domestic and oversea-leading production and testing equipment.
Packing and Transportation

We provide you with the best product packaging design services, thereby allowing you to save more shipping charges

FAQ
Q: Are you the factory or the trading company?
A: We are the factory.
Q: How long is your guarantee Period?
A: We uaually offer 1 year guarantee for our general products.
Q: How can I get the samples?
A: We can make the sample order. And usually we will charge for it.
But the samples fee will be return to you when you make the bulk order.
Q: Where is your factory? How can we visit your factory?
A: Our factory located in Zhengzhou city, Henan Province. You could reach here by train and by air.
We can pick you up in the airport and the railway station.
Q; What is your MOQ?
A: It`s base on the cable type or wire type. Please contact me. We will let you know.