IEC 60502 XLPE Power Cable Cu (AL) /Xlp/Cts/Swa (STA) /PVC (PE)

IEC 60502 XLPE Power Cable Cu (AL) /Xlp/Cts/Swa (STA) /PVC (PE)

IEC 60502 XLPE Power Cable Cu (AL) /Xlp/Cts/Swa (STA) /PVC (PE)

YJV, YJLV, YJV22, YJLV22, YJV32, YJLV32

Underground

High Voltage Cable

AC Cable

XLPE

PVC

Round Wire

Bare Copper Wire

ISO, CCC, CE, RoHS

ISO9001, Ce, CCC

Sta or Swa

IEC 60502

1-5 Cores

Available and Free

All Wooden Drum, Iron-Wooden Drum, All Iron Drum

Within 30 Days After Deposit

PVC or PE

1-35kv

Around 2000km Per Month

1.5-1000mm2

Jinshui

Export All Wooden Drum

Henan, China (Mainland)

8544492100

Product Description

IEC 60502 XLPE power cable CU(AL)/XLP/CTS/SWA(STA)/PVC(PE)

Product Description

 Application

It is used to transmit and distribute power in power transmission and distribution system of 35kV or lower. It is generally applied to the fields including power, construction, mines, metallurgy, petrochemical industry and communication in complete replace of oil immersed paper insulated power cable and in partial replace of PVC insulated power cable.
Structure

Conductor: Copper (or Aluminium)

Insulation: XLPE

Filler: Non-hygroscopic Polypropylene(PP)

Binder Tape: Non-woven fabric

Inner Covering: PVC

Metallic Armour: Galvanized Steel Wire Armour(SWA)

Non-magnetic Steel Wire Armour(only for single core)

Aluminium Wire Armoured(AWA, only for single core)

Outer Sheath: PVC (or PE)

Standards
The products are mainly complying with IEC 60502 standard, also can be produced according to OEM requirements and other standards, such as BS standard, DIN standard, ASTM standard, etc.
Voltage grade is up to 35kv, cross-section area can be up to 400 sqmm (copper or alumimum conductor). Conductor long-time operating temperature is 90°C. In short circuit, conductor highest temperature should be not more than 250°C
 
Using features

1. Rated voltage: Uo/U: 26/35kV, 21/35kV, 12/20 kV (24 kV), 8.7/10kV, 8.7/15kV, 6/6kV, 6/10kV.
2. No. of core: Single-core, Three-core.
3. The highest allowed operating temperature of conductor for long-term working is 90°C. In short-circuit (Max. Long-term is no more than 5 seconds). The highest temperature for conductor is no more than 250°C.
4. D.C Resistance of the conductor complies with the stipulations of GB/T3956-1997.
5. The environment temperature should be no lower than 0°C when lay. Otherwise it should be preheated.
6. The cable is laid without horizontal drop limit. The Min. Bending radius of three-core cable should be no smaller than 12 times of cable outer diameter.
7. Working Frequency Voltage Test:.
For cable with Uo of 3.6kV or lower: 2.5Uo+2kV/5min without puncture.
For cable with Uo of 3.6Kv~18kV: 3.5Uo/5min without puncture.
For cable with Uo of 21kV and 26 kV: 2.5Uo/30min without puncture.
8. Partial Discharge Test: The discharge volume should be no more than 10pC under 1.73Uo for the cable.

Type

Description

Number of cores

Nominal cross section of conductor

YJV32

CU/XLPE/SWA/PVC Power Cable

1, 2, 3, 4, 3+1,

5, 4+1, 3+2

1.5~1000mm2

YJLV32

AL/XLPE/SWA/PVC Power Cable

YJV72

CU/XLPE/Non-magnetic SWA or AWA/PVC Power Cable

1

1.5~1000mm2

YJLV72

AL/XLPE/Non-magnetic SWA or AWA/PVC Power Cable

YJV33

CU/XLPE/SWA/PE Power Cable

1, 2, 3, 4, 3+1,

5, 4+1, 3+2

1.5~1000mm2

YJLV33

AL/XLPE/SWA/PE Power Cable

Z-YJV32

CU/XLPE/SWA Flame-retardant Power Cable

1, 2, 3, 4, 3+1,

5, 4+1, 3+2

1.5~1000mm2

Z-YJLV32

AL/XLPE/SWA Flame-retardant Power Cable

WDZ-YJY33

CU/XLPE/SWA Low Smoke Halogen Free or Zero Halogen (LSHF or LSZH) Flame-retardant Power Cable

1, 2, 3, 4, 3+1,

5, 4+1, 3+2

1.5~1000mm2

WDZ-YJLY33

AL/XLPE/SWA Low Smoke Halogen Free or Zero Halogen (LSHF or LSZH) Flame-retardant Power Cable

N-YJV32

CU/XLPE/SWA Fire-resistant Power Cable

1, 2, 3, 4, 3+1,

5, 4+1, 3+2

1.5~1000mm2

 

Type

Name

Application

Cu

conducto

Al

Conductor

YJV

YJLV

XLPE insulated, PVC or PE sheathed power cable

For laying indoor, tunnel, channel and underground. Unable to bear external mechanical force during laid.

YJY

YJLV

YJV22

YJLV22

XLPE insulated, steel tape armoured, PVC or PE sheathed power cable

For laying indoor, tunnel, channel and underground. Able to bear external mechanical force, but unable to bear large pulling force.

YJV23

YJLY23

YJV32

YJLV32

XLPE insulated, fine steel wire armoured, PVC or PE sheathed power cable

For laying in shaft with large difference of level. Able to bear external mechanical force ,and moderate pulling force.

YJV42

YJLV42

XLPE insulated, thick steel armoured, PVC or PE sheathed power cable

For laying in shaft with large difference of level. Able to bear external mechanical force ,and moderate pulling force.

 

Packaging & Shipping
Tests
Certificates
Trade shows
Company Information

 Outfitted with the latest generation of technologies, facilities and equipments, Jinshui Wire & Cable Group can produce more than 1,400 types of cables and wires in scores of categories. We mainly have the following quality products with strong international competitiveness: aluminum rod for electrical purpose, hard drawn copper conductor, all aluminum conductors (AAC), aluminum conductors steel reinforcement (ACSR), all aluminum alloy conductors (AAAC), aerial bundled cables up to 1KV (ABC), PVC insulated wire and flexible wire, welding cable, control cable, rubber insulated cable, rubber insulated flexible wire, PVC insulated power cable, XLPE insulated power cable up to 220KV and cable accessories. Our products can conform to dozens of standards such as GB, JB, IEC, BS, DIN, ASTM, JIS, NF, AS/NZS and so on. Also we can produce based on customers’ requirements and specifications. Our products have already been verified to conform to the certification of China Compulsory Product Certification (CCC), PCCC, CQC Mark Certification, MA and others from China and abroad.

 

Tags: , ,

Contact us

 

 

 

Success! Thanks for Your Request.
Error! Please Try Again.