H07rn-F Ruber Cable Hrn HD 22.4 S3, IEC 60245-4, DIN VDE 0282 Part 4

H07rn-F Ruber Cable Hrn HD 22.4 S3, IEC 60245-4, DIN VDE 0282 Part 4

H07rn-F Ruber Cable Hrn HD 22.4 S3, IEC 60245-4, DIN VDE 0282 Part 4

H07RN-F

SABS, ISO9001-2008, CQC Certificate, CE , SGS

Tianjin, Qingdao, Ningbo, Shanghai, Xiamen, Shenzh

L/C, D/P, D/a ,T/T, M/T, D/D, O/a, C.W.O, C.O.D, C

2000ton/Month

1km

Accord with The Request

Jiapu

Drum

CE SGS SABS

Henan, China

4101962331

Product Description

H07RN-F ruber cable HRN HD 22.4 S3, IEC 60245-4, DIN VDE 0282 part 4
HRN HD 22.4 S3, IEC 60245-4, DIN VDE 0282 part 4

Construction:

Conductor: bare or tinned copper conductor, fine wired stranded, class 5 acc. to IEC 60228 / HD 383 / DIN VDE 0295
Insulation: rubber compound on ethylene-propylene basis (EPM, earlier: EPR), i.e. EI4 acc. to DIN VDE 0282 part 1
At some producers: resistant textile tape spirally wrapped around each core, acc. DIN VDE 0282 part 4
Sheath: rubber compound on poly-chloroprene basis (CR), i.e. acc. to. DIN VDE 0282 part 1
At one-layer construction: EM2 compound
At two-layer construction: inner layer EM2 or EM3; external layer EM2
sheath colour: black
Core colour marking: acc. to HRN HD 308 S2 / VDE 0293-308
during installation:
-30 °C up to +60 °C
maximal operating temp: +60 °C

at short circuit of max. 5 s: up to 200 °C
Nominal voltage: U/U = 450/500 V
Test voltage: 2500 V
Alternating current three-phase and single-phase:
U/U = 476/825 V
Direct current: U/U = 619/1238 V
For fixed installation:
4D

For running over roller: 7,5D
At winding on drum: 5 -7D
Behaviour in fire: IEC 60332-1
Ozone resistance: acc. to DIN VDE 0472 part 805

Workshop:

Shipment:

Specification:

Dimensions – number of cores x conductor cross-section* Construction of individual conductor Conductor diameter Insulation thickness Sheath thickness External diameter Conductor resistance at 20 C Cu weight Cable weight Packing
nominal max. nominal nominal min-max. max. approx.
N x mm2 n x mm mm mm mm mm Ω/km kg/km kg/km
1 x 1,5 30 x 0,25 1,8 0,8 1,4 5,7 – 7,1 13,3 14,4 57 CUT
1 x 2,5 50 x 0,25 2,6 0,9 1,4 6,3 – 7,9 7,98 24 79 CUT
1 x 4 56 x 0,30 3,2 1,0 1,5 7,2 – 9,0 4,95 38,4 100 CUT
1 x 16 84 x 0,30 3,9 1,0 1,6 7,9 – 9,8 3,30 57,6 135 CUT
1 x 10 80 x 0,40 5,1 1,2 1,8 9,5 – 11,9 1,91 96 204 CUT
1 x 16 128 x 0,40 6,3 1,2 1,9 10,8 – 13,4 1,21 153,6 286 CUT
1 x 25 200 x 0,40 7,8 1,4 2,0 12,7 – 15,8 0,780 240 390 CUT
1 x 35 280 x 0,40 9,2 1,4 2,2 14,3 – 17,9 0,554 336 523 CUT
1 x 50 400 x 0,40 11 1,6 2,4 16,5 – 20,6 0,386 480 699 CUT
1 x 70 356 x 0,50 13 1,6 2,6 18,6 – 23,3 0,272 672 950 CUT
1 x 95 485 x 0,50 15,1 1,8 2,8 20,8 – 26,0 0,206 912 1202 CUT
1 x 120 614 x 0,50 17 1,8 3,0 22,8 – 28,6 0,161 1152 1524 CUT
1 x 150 765 x 0,50 19 2,0 3,2 25,2 – 31,4 0,129 1440 1839 CUT
1 x 185 944 x 0,50 21 2,2 3,4 27,6 – 34,4 0,106 1776 2184 CUT
1 x 240 1225 x 0,50 24 2,4 3,5 30,6 – 38,3 0,0801 2304 2840 CUT
1 x 300 1530 x 0,50 27 2,6 3,6 33,5 – 41,9 0,0641 2880 3413 CUT
1 x 400 2034 x 0,50 31 2,8 3,8 37,4 – 46,8 0,0486 3840 4600 CUT
1 x 500 1768 x 0,60 35 3,0 4,0 41,3 – 52,0 0,0384 4800 6000 CUT
2 x 1 32 x 0,20 1,5 0,8 1,3 7,7 – 10,0 19,5 19,2 105 CUT
2 x 1,5 30 x 0,25 1,8 0,8 1,5 8,5 – 11,0 13,3 28,8 136 c.100
2 x 2,5 50 x 0,25 2,6 0,9 1,7 10,2 – 13,1 7,98 48 190 c.100
2 x 4 56 x 0,30 3,2 1,0 1,8 11,8 – 15,1 4,95 76,8 271 CUT
2 x 6 84 x 0,30 3,9 1,0 2,0 13,1 – 16,8 3,30 115,2 372 CUT
2 x 10 80 x 0,40 5,1 1,2 17,7 – 22,6 1,91 192 643 CUT
2 x 16 128 x 0,40 6,3 1,2 20,2 – 25,7 1,21 307,2 810 CUT
2 x 25 200 x 0,40 7,8 1,4 24,3 – 30,7 0,780 480 1160 CUT
H07RN-F
3 G 1 32G0,20 1,5 0,8 1,4 8,3 – 10,7 19,5 28,8 125 CUT
3 G 1,5 30G0,25 1,8 0,8 1,6 9,2 – 11,9 13,3 43,2 162 c.100
3 G 2,5 50G0,25 2,6 0,9 1,8 10,9 – 14,0 7,98 72 229 c.100
3 G 4 56G0,30 3,2 1,0 1,9 12,7 – 16,2 4,95 115,2 329 CUT
3 G 6 84G0,30 3,9 1,0 2,1 14,1 – 18,0 3,30 172,8 452 CUT
3 G 10 80G0,40 5,1 1,2 3,3 19,1 – 24,2 1,91 288 776 CUT
3 G 16 128G0,40 6,3 1,2 3,5 21,8 – 27,6 1,21 460,8 1058 CUT
3 G 25 200G0,40 7,8 1,4 3,8 26,1 – 33,0 0,780 720 1473 CUT
3 G 35 280G0,40 9,2 1,4 4,1 29,3 – 37,1 0,554 1008 1728 CUT
3 G 50 400G0,40 11 1,6 4,5 34,1 – 42,9 0,386 1440 2302 CUT
3 G 70 356G0,50 13 1,6 4,8 38,4 – 48,3 0,272 2016 3400 CUT
3 G 95 485G0,50 15,1 1,8 5,3 43,3 – 54,0 0,206 2736 4450 CUT
3 G 120 614G0,50 17 1,8 5,6 47,4 – 60,0 0,161 3456 5180 CUT
3 G 150 765G0,50 19 2,0 6,0 52,0 – 66,0 0,129 4320 6500 CUT
H07RN-F
4 G 1 32G0,20 1,5 0,8 1,5 9,2 – 11,9 19,5 38,4 163 CUT
4 G 1,5 30G0,25 1,8 0,8 1,7 10,2 – 13,1 13,3 57,6 197 c.100
4 G 2,5 50G0,25 2,6 0,9 1,9 12,1 – 15,5 7,98 96 279 c.100
4 G 4 56G0,30 3,2 1,0 2,0 14,0 – 17,9 4,95 153,6 402 CUT
4 G 6 84G0,30 3,9 1,0 2,3 15,7 – 20,0 3,30 230,4 561 CUT
4 G 10 80G0,40 5,1 1,2 3,4 20,9 – 26,5 1,91 384 935 CUT
4 G 16 128G0,40 6,3 1,2 3,6 23,8 – 30,1 1,21 614,4 1286 CUT
4 G 25 200G0,40 7,8 1,4 4,1 28,9 – 36,6 0,780 960 1692 CUT
4 G 35 280G0,40 9,2 1,4 4,4 32,5 – 41,1 0,554 1344 2266 CUT
4 G 50 400G0,40 11 1,6 4,8 37,7 – 47,5 0,386 1920 3021 CUT
4 G 70 356G0,50 13,1 1,6 5,2 42,7 – 54,0 0,272 2688 4121 CUT
4 G 95 485G0,50 15,1 1,8 5,9 48,4 – 61,0 0,206 3648 5361 CUT
4 G 120 614G0,50 17 1,8 6,0 53,0 – 66,0 0,161 4608 6546 CUT
4 G 150 765G0,50 19 2,0 6,5 58,0 – 73,0 0,129 5760 8095 CUT
4 G 185 944G0,50 21 2,2 7,0 64,0 – 80,0 0,106 7104 9652 CUT
4 G 240 1225G0,50 24 2,4 72,0 – 91,0 0,0801 9216 12614 CUT
4 G 300 1530G0,50 27 2,6 80,0 – 101 0,0641 11520 15200 CUT
H07RN-F
5 G 1 32 x 0,20 1,5 0,8 1,6 11,6 19,5 48 168 CUT
5 G 1,5 30 x 0,25 1,8 0,8 1,8 11,2 – 14,4 13,3 72 234 c.100
5 G 2,5 50 x 0,25 2,6 0,9 2,0 13,3 – 17,0 7,98 120 348 c.100
5 G 4 56 x 0,30 3,2 1,0 2,2 15,6 – 19,9 4,95 192 470 CUT
5 G 6 84 x 0,30 3,9 1,0 2,5 17,5 – 22,2 3,30 288 620 CUT
5 G 10 80 x 0,40 5,1 1,2 3,6 22,9 – 29,1 1,91 480 1155 CUT
5 G 16 128 x 0,40 6,3 1,2 3,9 26,4 – 33,3 1,21 768 1460 CUT
5 G 25 200 x 0,40 7,8 1,4 4,4 32,0 – 40,4 0,780 1200 2380 CUT
5 G 35 280 x 0,40 9,2 1,4 4,5 37 – 42 0,554 1680 2716 CUT
5 G 50 400 x 0,40 11 1,6 5,0 43 – 47 0,386 2400 3809 CUT
5 G 70 356 x 0,50 13,1 1,6 5,5 45 – 50 0,272 3360 5087 CUT
7 G 1,5 30 x 0,25 1,8 0,8 2,5 14 – 15,7 13,3 100,8 335 CUT
12 G 1,5 30 x 0,25 1,8 0,8 2,9 17,6 – 22,4 13,3 172,8 560 CUT
19 G 1,5 30 x 0,25 1,8 0,8 2,5 22,5 – 26,6 13,3 273,6 795 CUT
24 G 1,5 30 x 0,25 1,8 0,8 3,5 24,3 – 30,7 13,3 345,6 1000 CUT
36 G 1,5 30 x 0,25 1,8 0,8 3,8 33,0 13,3 518,4 CUT
H07RN-F
7 G 2,5 50 x 0,25 2,6 0,9 2,7 16,5 – 18,2 7,98 168 520 CUT
12 G 2,5 50 x 0,25 2,6 0,9 3,1 18,5 – 22,5 7,98 288 760 CUT
19 G 2,5 50 x 0,25 2,6 0,9 3,5 24,6 – 31 7,98 456 1075 CUT
24 G 2,5 50 x 0,25 2,6 0,9 3,9 28,8 – 36,4 7,98 576 1390 CUT
36 G 2,5 50 x 0,25 2,6 0,9 4,3 37,5 7,98 864 CU

Certification:

FAQ:
1. How many years has Henan Jiapu Cable Group been in production?
Founded in October 1998 by Mr. Gu, our facility has three separate manufacturing workshops within its 100,000-sq.-ft. building. In 2012, we operates in a new 666,000 sq. foot state-of-the-art facility in Xiaodian Industry Park.,Xinxiang, Henan ,China

2. What kinds of products does Jiapu Cable manufacture?

1)Bare Conductor ,such as AAC,AAAC,ACSR,ACAR,AACSR,ACSR/AW and so on;

2)Aerial Bundled Cable (1kV-35kV ),such as Duplex,Triplex,Quadruplex Drop Wires and so on;

3)PVC Insulated (Flexible ) Wire ;

4) PVC Insulated and Sheathed (Armoured) Power Cable;

5)Low, Medium, High Voltage (1kV-220kV) XLPE Insulated (Armoured) Power Cable;

6)Welding Cable, Control Cable, Concentric Cable, Rubber Sheathed Cable and so on;

3. What kind of certifications do you have?

SABS, CE, ISO9001-2000, SGS

4.Which markets do you involve mainly in?

Our products have been exported mainly to Africa, Middle East, South-east Asia, South America,Central America,North America, Europe ,Australia, etc.

5. Which standards do you comply with when you produce the electrical wires and cables ?
We are able to produce electrical wires and cables based on GB, JB, IEC, BS, DIN, ASTM, JIS, NF, AS/NZS, CSA, etc. Meanwhile, we can design and manufacture the cables according to the samples and technical specification the customer supply.

6. What is the min.order quantity ?
The power cables with medium or high voltage, that should comply with the property of installed equipments. Anyhow,we will try our best to solve the problem and meet with the requirement If you have special request.

7. What is the production capacity per week or per month ?

For the bare conductor, we can finish 3000 tons within one month. For power cables, that depends on the type and size. The total output value per month is approx. USD3,000,000.00 for insulated aluminum cables and that is approx. USD8,000,000.00 for insulated copper cables.

8. Do you supply the customers with installation service in foreign country ?

We don’t have professional installation teams in foreign country.But if that is necessary, we will recommend our partners to cooperate with you.
It depends on the type and size of electrical wires and cables. For some small electrical wires, 100 meters can be accepted .But for

Tags: , ,

Contact us

 

 

 

Success! Thanks for Your Request.
Error! Please Try Again.