Cu/XLPE/Cts/PVC, Power Cable, 8.7/15 (17.5) Kv, 3/C (IEC 60502-2)

Cu/XLPE/Cts/PVC, Power Cable, 8.7/15 (17.5) Kv, 3/C (IEC 60502-2)

Cu/XLPE/Cts/PVC, Power Cable, 8.7/15 (17.5) Kv, 3/C (IEC 60502-2)

CU/XLPE/CTS/PVC

Underground, Industrial, Power Station

Low and Medium Voltage Cable

DC Cable

XLPE

PVC

Round Wire

Bare Copper Wire

ISO, CCC

Cu/XLPE/Cts/PVC

Boan

8.7/15 (17.5) Kv

3

Cu

2

25-400 mm2

DingAn

Heated Steel-Wooden Drum/Steel Drum

SGS

Jiangsu Yixing, China

8544601200

Product Description

Cu/XLPE/CTS/PVC, Power Cable, 8.7/15 (17.5) KV, 3/C (IEC 60502-2)
The cable design conforms to IEC 60502 part 2. However if requested, we can separately offer guaranteed technical particulars for cables as per different international specifications or specific customer needs.

CONSTRUCTIONAL FEATURES

Conductor
Copper Conductors upto 1000 sq mm will be circular compacted & stranded and shall comply with IEC-60228 Class 2.

Conductor screen
This will be an extruded layer of semiconducting XLPE applied under simultaneous triple extrusion process over the conductor along with the insulation and the insulation screen.

Insulation
This will be an extruded layer of insulating grade XLPE applied over conductor screen under triple extrusion process along with conductor screen and insulation screen.

Insulation screen
This will be a layer of semiconducting XLPE which will be applied by tripe extrusion process over the insulation.

Metallic screen
It will consist of a layer of copper tape applied helically with overlap over insulation screen. Other combinations of metallic screens as per customer’s requirement can also be provided on request.

Inner Sheath (Bedding)
Extruded layer of PVC or PE is applied over the laid-up cores. PVC is normally of grade ST2 or PE of grade ST7 as per IEC 60502 Part 2.

Outer sheath
An extruded layer is applied over the armour in case of armoured cables and over the laid up cores in case of unarmoured cables. Outer sheath material can be either PVC of grade ST2 or PE of grade ST7 as per IEC-60502 Part 2.

Section Conductor diameter Conductor weight Insulation thickness Outer sheath thickness Cable overall diamete Cable weight Minimum bending radius of cable (During installation) DC resistance of conductor at 20 °C (Maximum)
mm2 mm kg/km mm mm mm kg/km mm ohm/km
25 5.9 665 4.5 2.4 44.0 2125 660 0.727
35 6.9 922 4.5 2.5 46.5 2515 698 0.524
50 8.1 1242 4.5 2.6 49.0 2995 735 0.387
70 9.7 1800 4.5 2.7 53.0 3765 795 0.268
95 11.4 2500 4.5 2.8 56.5 4695 848 0.193
120 12.9 3152 4.5 2.9 60.0 5560 900 0.153
150 14.3 3888 4.5 3.0 63.0 6495 945 0.124
185 16.0 4875 4.5 3.1 67.0 7735 1005 0.0991
240 18.4 6410 4.5 3.3 73.0 9660 1095 0.0754
300 20.6 8039 4.5 3.4 77.5 11630 1163 0.0601
400 23.3 10301 4.5 3.7 85.0 14510 1275 0.0470

Tags: , ,

Contact us