Copper Conductor 2 Core Flat Concentric Cable 16mm2

Standard
IEC 60502-1: Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um=1.2 kV) up to 30 kV (Um=36 kV) – Part 1: Cables for rated voltages of 1 kV (Um=1.2 kV) and 3 kV (Um=3.6 kV)

Application
This 2 core copper conductor concentric cable 16mm2 is used in power distribution lines of rated voltage 600/1000V and below as the connecting cable from the power source to the electricity meter.

Product Details
1) Phase conductor: stranded plain copper, 7/1.70 mm
2) Sectional area: 16 mm2
3) Insulation: XLPE, 1.1 mm
4) No. of cores: 2
5) Inner sheath: PVC, 1.0 mm
6) Neutral core: plain copper, 65/0.56 mm
7) Outer sheath: weather resistant PVC, 1.8 mm
8) Overall diameter: 21.5*14.5 mm
9) Approx. weight: 600 kg/km
10) Max DC resistance at 20 degrees: 1.15 ohm/km
11) Max. working temperature: 90 degrees
12) Single core, two core and three core cables of other sizes also available
13) Max. D.C. resistance for copper conductor of other areas

Area (mm2)	6	10	16	25	35
Resistance (Ω/km)	3.08	1.83	1.15	0.727	0.524
Area (mm2)	50	70	95	120	150
Resistance (Ω/km)	0.387	0.268	0.193	0.153	0.124

Packaging details

Polyethylene film packaging 1) Usually used for cables with an overall diameter 10mm and below 2) 100 meters per roll or as per customer’s requirements 3) Packaging dimension: 50cm * 50cm * 20cm or below 4) Weight: 30 kg/roll or below

Steel-wood drum packaging 1) Used for cables with a overall diameter of 10mm and above 2) Drum size: 180cm * 180cm *110cm (different sizes are available according to packaging length) 3) Standard length: as per customer’s requirements.

Customer service
1) Select the right cable as per customer’s requirements
2) Design suitable packaging to guarantee safe and the most economic delivery
3) Provide installation and use guidance
4) Product quality guarantee under the normal use