China PVC/XLPE Insulated 1-5 Core Low Voltage Power Cable
Product Description
Standard:
IEC60502,and BS6346, VDE, AS/NZS, UL,etc or as customer’s request.
The Rated Voltage(kv):
1st class 0.6/1 1.8/3 3.6/6 6/10 8.7/15 12/20 18/30 21/35
2nd class 1/1 3/3 6/6 8.7/10 12/15 18/20 – 26/35
Application:
Power cable are most suitable for direct burial or for installation on trays or ducts, Where there is
a risk of mechanical damage, armoured cables should be used.
TYPE |
NAME |
Main Application |
|
CU core |
AL core |
|
|
YJV/YJY |
YJLV/YJLY |
XLPE insulated,PVC/PE sheathed power cable |
For laying indoor ,tunnel,canal and underground. |
YJV22/YJV23 |
YJLV22/YJLV23 |
XLPE insulated,steel tape armored, |
For laying indoor ,tunnel,canal and underground. |
YJV32/YJV33 |
YJLV32/YJLV33 |
XLPE insulated,thin steel wire armored, |
For laying in shaft,water underground will large difference of level. |
YJV42/YJV43 |
YJLV42/YJLV43 |
XLPE insulated,thick steel wire armored, |
For laying in water and seabed. |
Number of cores:
1core 2core 3core 3+1core 4core 4+1core 4+2core 5core and so on.
Nominal Section
Area(mm2) :1.5 2.5 4 6 10 16 25 35 50 70 95 120 150 185 240 300 400 500 630 800
Features:
1). XLPE insulated power cable not only has excellent electric, mechanical properties, but also has powerful resistance against chemical erosion, heat-aging and environmental stress.
2) .Its structures are simple. The long term operating temperature is +90 degrees. It is convenient to use and can be laid with no restriction of different level.
3). Our XLPE cables can be produced according to our specification which is equivalent to IEC 502-1983, and its some indexes are superior to 502-1983.
4). We can design and manufacture special XLPE cable according to the other standards required by the customers.
5).Application: for laying indoor, tunnel, canal and underground.
Nominal Cross Section |
Diameter of Conductor (Approx.) |
Nominal Insulation thickness |
Nominal Inner Covering thickness |
Nominal Alum Wire dia. |
Nominal Sheath thickness |
Overall Diameter (Approx.) |
mm² | mm | mm | mm | mm | mm | mm |
1×4 | 2.3 | 0.7 | 1 | 0.8 | 1.8 | 10.9 |
1×6 | 2.8 | 0.7 | 1 | 0.8 | 1.8 | 11.4 |
1×10 | 3.6 | 0.7 | 1 | 0.8 | 1.8 | 12.2 |
1×16 | 4.5 | 0.7 | 1 | 0.8 | 1.8 | 13.1 |
1×25 | 5.6 | 0.9 | 1 | 0.8 | 1.8 | 14.6 |
1×35 | 6.7 | 0.9 | 1 | 1.25 | 1.8 | 16.6 |
1×50 | 8 | 1 | 1 | 1.25 | 1.8 | 18.1 |
1×70 | 9.4 | 1.1 | 1 | 1.25 | 1.8 | 19.7 |
1×95 | 11 | 1.1 | 1 | 1.6 | 1.8 | 22 |
1×120 | 12.4 | 1.2 | 1 | 1.6 | 1.8 | 23.6 |
1×150 | 13.8 | 1.4 | 1 | 1.6 | 1.8 | 25.4 |
1×185 | 15.3 | 1.6 | 1 | 1.6 | 1.8 | 27.4 |
1×240 | 17.5 | 1.7 | 1 | 1.6 | 1.9 | 29.9 |
1×300 | 19.5 | 1.8 | 1 | 2 | 2 | 33.1 |
1×400 | 22.6 | 2 | 1.2 | 2 | 2.2 | 37.3 |
1×500 | 25.2 | 2.2 | 1.2 | 2 | 2.3 | 40.5 |
Nominal Cross Section |
Diameter of Conductor (Approx.) |
Nominal Insulation thickness |
Nominal Inner Covering thickness |
Nominal Steel Wire dia. |
Nominal Sheath thickness |
Overall Diameter (Approx.) |
mm² | mm | mm | mm | mm | mm | mm |
2×1.5 | 1.4 | 0.7 | 1 | 0.8 | 1.8 | 12.8 |
2×2.5 | 1.8 | 0.7 | 1 | 0.8 | 1.8 | 13.6 |
2×4 | 2.3 | 0.7 | 1 | 0.8 | 1.8 | 14.6 |
2×6 | 2.8 | 0.7 | 1 | 1.25 | 1.8 | 16.5 |
2×10 | 3.6 | 0.7 | 1 | 1.25 | 1.8 | 18.1 |
2×16 | 4.5 | 0.7 | 1 | 1.25 | 1.8 | 19.9 |
2×25 | 5.6 | 0.9 | 1 | 1.6 | 1.8 | 23.6 |
2×35 | 6.7 | 0.9 | 1 | 1.6 | 1.8 | 25.8 |
2×50 | 8 | 1 | 1 | 1.6 | 1.9 | 29 |
2×70 | 9.4 | 1.1 | 1 | 2 | 2 .3 | 3.2 |
2×95 | 11 | 1.1 | 1.2 | 2.1 | 3 | 7.1 |
2×120 | 12.4 | 1.2 | 1.2 | 2 | 2.3 | 40.5 |
2×150 | 13.8 | 1.4 | 1.2 | 2.5 | 2.4 | 45.4 |
2×185 | 15.3 | 1.6 | 1.4 | 2.5 | 20.6 | 49.9 |
2×240 | 17.5 | 1.7 | 1.4 | 2.5 | 20.7 | 55.1 |
2×300 | 19.5 | 1.8 | 1.6 | 2.5 | 20.9 | 60.2 |
2×400 | 22.6 | 2 | 1.6 | 2.5 | 30.1 | 67.7 |
Nominal Cross Section |
Diameter of Conductor (Approx.) |
Nominal Insulation thickness |
Nominal Inner Covering thickness |
Nominal Steel Wire dia. |
Nominal Sheath thickness |
Overall Diameter (Approx.) |
mm² | mm | mm | mm | mm | mm | mm |
3×1.5 | 1.4 | 0.7 | 1 | 0.8 | 1.8 | 13.2 |
3×2.5 | 1.8 | 0.7 | 1 | 0.8 | 1.8 | 14.1 |
3×4 | 2.3 | 0.7 | 1 | 0.8 | 1.8 | 15.2 |
3×6 | 2.8 | 0.7 | 1 | 1.25 | 1.8 | 17.1 |
3×10 | 3.6 | 0.7 | 1 | 1.25 | 1.8 | 18.9 |
3×16 | 4.5 | 0.7 | 1 | 1.25 | 1.8 | 20.8 |
3×25 | 5.6 | 0.9 | 1 | 1.6 | 1.8 | 24.7 |
3×35 | 6.7 | 0.9 | 1 | 1.6 | 1.8 | 27.2 |
3×50 | 8 | 1 | 1 | 1.6 | 1.9 | 30.6 |
3×70 | 9.4 | 1.1 | 1 | 2 | 2.1 | 35.2 |
3×95 | 11 | 1.1 | 1.2 | 2 | 2.2 | 39.3 |
3×120 | 12.4 | 1.2 | 1.2 | 2 | 2.3 | 43 |
3×150 | 13.8 | 1.4 | 1.4 | 2.5 | 2.5 | 48.6 |
3×185 | 15.3 | 1.6 | 1.4 | 2.5 | 2.7 | 53 |
3×240 | 17.5 | 1.7 | 1.4 | 2.5 | 2.8 | 58.5 |
3×300 | 19.5 | 1.8 | 1.6 | 2.5 | 3 | 64 |
3×400 | 22.6 | 2 | 1.6 | 3.15 | 3.3 | 73.5 |
Nominal Cross Section |
Diameter of Conductor (Approx.) |
Nominal Insulation thickness |
Nominal Inner Covering thickness |
Nominal Steel Wire dia. |
Nominal Sheath thickness |
Overall Diameter (Approx.) |
||
mm² | mm | mm | mm | mm | mm | mm | mm | mm |
3x 16/10 | 4.5 | 3.6 | 0.7 | 0.7 | 1 | 1.6 | 1.8 | 22.7 |
3x 25/16 | 5.6 | 4.5 | 0.9 | 0.7 | 1 | 1.6 | 1.8 | 26.5 |
3x 35/16 | 6.7 | 4.5 | 0.9 | 0.7 | 1 | 1.6 | 1.9 | 29 |
3x 50/25 | 8 | 5.6 | 1 | 0.9 | 1 | 1.6 | 2.1 | 33 |
3x 70/35 | 9.4 | 6.7 | 1.1 | 0.9 | 1.2 | 2 | 2.2 | 38 |
3x 95/50 | 11 | 8 | 1.1 | 1 | 1.2 | 2 | 2.3 | 42.4 |
3×120/70 | 12.4 | 9.4 | 1.2 | 1.1 | 1.2 | 2 | 2.5 | 48 |
3×150/70 | 13.8 | 9.4 | 1.4 | 1.1 | 1.4 | 2.5 | 2.7 | 52 |
3×185/95 | 15.3 | 11 | 1.6 | 1.1 | 1.4 | 2.5 | 2.8 | 57.2 |
3×240/120 | 17.5 | 12.4 | 1.7 | 1.2 | 1.6 | 2.5 | 3.1 | 64 |
3×300/150 | 19.5 | 13.8 | 1.8 | 1.4 | 1.6 | 2.5 | 3.2 | 69.8 |
Nominal Cross Section |
Diameter of Conductor (Approx.) |
Nominal Insulation thickness |
Nominal Inner Covering thickness |
Nominal Steel Wire dia. |
Nominal Sheath thickness |
Overall Diameter (Approx.) |
mm² | mm | mm | mm | mm | mm | mm |
4×1.5 | 1.4 | 0.7 | 1 | 0.8 | 1.8 | 14 |
4×2.5 | 1.8 | 0.7 | 1 | 0.8 | 1.8 | 14.9 |
4×4 | 2.3 | 0.7 | 1 | 1.25 | 1.8 | 17 |
4×6 | 2.8 | 0.7 | 1 | 1.25 | 1.8 | 18.2 |
4×10 | 3.6 | 0.7 | 1 | 1.25 | 1.8 | 20.2 |
4×16 | 4.5 | 0.7 | 1 | 1.6 | 1.8 | 23 |
4×25 | 5.6 | 0.9 | 1 | 1.6 | 1.8 | 26.7 |
4×35 | 6.7 | 0.9 | 1 | 1.6 | 1.9 | 29.5 |
4×50 | 8 | 1 | 1 | 2 | 2.1 | 34.2 |
4×70 | 9.4 | 1.1 | 1.2 | 2 | 2.2 | 38.8 |
4×95 | 11 | 1.1 | 1.2 | 2 | 2.3 | 42.9 |
4×120 | 12.4 | 1.2 | 1.4 | 2.5 | 2.5 | 48.6 |
4×150 | 13.8 | 1.4 | 1.4 | 2.5 | 2.7 | 53.2 |
4×185 | 15.3 | 1.6 | 1.4 | 2.5 | 2.8 | 58.1 |
4×240 | 17.5 | 1.7 | 1.6 | 2.5 | 3.1 | 64.8 |
4×300 | 19.5 | 1.8 | 1.6 | 2.5 | 3.2 | 70.4 |
4×400 | 22.6 | 2 | 1.8 | 3.15 | 3.6 | 81.3 |
Production progress
Packaging
Packing Details : Packing in wooden drum, iron-wooden drum or as customer’s requirement.
Delivery Details : 15-25 days after place an order.
About US
People’s Cable Group Co., Ltd. was founded in 2007, located in Zhengzhou Gongyi economic development zone. Our company has 2 factories (Zhitian factory and Zhulin factory), occupies total area of more than 300,000 square meters, with building area 230,000 square meters.
Customer Visit
We have a professional sales team with each of them has engaged in this job for 3-10 years, so that we can provide the comprehensive and professional technology for you.
With the perfect quality and after sales service, till now we have exported to more than 80 countries, welcome to visit us and establish win-win business relationship!
Contact us
- Next: National Standard Aluminum Core Electrical Cable and Wire Yjlv 4*150mm
- Previous: 450/750V PVC Insulated Electrical Cable Wire 1-400mm