Bare Conductors. AAC, AAAC. ACSR

Bare Conductors. AAC, AAAC. ACSR

Bare Conductors. AAC, AAAC. ACSR

AAC. AAAC. ACSR

Bare Conductor/Power Transmission

AAC,ACSR,AAAC,Accc

IEC Bs ASTM VDE Aus and So on

up To1500mm2

10 Days

2km/Drum or at Customer Reuest

Zhengzhou Yifang Cable Co., Ltd.

Wooden or Wooden-Steel Drum

up to 1500 sqmm for AAC

Zhengzhou, China

7614100000

Product Description


AAC-All aluminum conductors:
All aluminum conductors are the most favored type for use in the construction of relatively short span distribution schemes and are in common use on lines for voltage up to 60 kV.
Another frequent application for all aluminum conductors is in flexible busbar connections.
Althou aluminum to copper connections can be made,it is better to use aluminum conductor for service connections,as varous forms of covered cable being available for this purpose.
The data sheets show the most common sizes of conductors but other sizes,to any recognized standards or customer specification can also be supplied.
AAC insulated with xlpe or pvc can be supplied as per the customers’ requirement.
Bare Conductor AAC All Aluminum Conductor AAC to DIN 48201

Size Calculated area Stranding and
wire diameter
Overall
diameter
Linear
mass
Rated strength Max. DC
resistance
at 20ºC
mm 2 mm 2 mm mm kg/km daN Ω/km
16 15.89 7/1.70 5.1 44 290 1.8018
25 24.25 7/2.10 6.3 67 425 1.1808
35 34.36 7/2.50 7.5 94 585 0.8332
50 49.48 7/3.00 9.0 135 810 0.5786
50 48.36 19/1.80 9.0 133 860 0.5950
70 65.82 19/2.10 10.5 181 1150 0.4371
95 93.27 19/2.50 12.5 256 1595 0.3084
120 117.00 19/2.80 14.0 322 1910 0.2469
150 147.10 37/2.25 15.2 406 2570 0.1960
185 181.60 37/2.50 17.5 501 3105 0.1587
240 242.54 61/2.25 20.2 670 4015 0.1191
300 299.43 61/2.50 22.5 827 4850 0.09650
400 400.14 61/2.89 26.0 1105 6190 0.07221
500 499.83 61/3.23 29.1 1381 7600 0.05781
625 626.20 91/2.96 32.6 1733 9690 0.04625
800 802.10 91/3.35 36.8 2219 12055 0.03611
1000 999.71 91/3.74 41.1 2766 14845 0.02897

ACSR=Aluminum conductor steel reinforced
Construction:
The mixed construction of ACSR makes it a very flexible medium from a design point of view.By varying the relative proportions of aluminum and steel the ideal conductor for any particular application can be produced.
Protection against corrosion
A coating of non-oxidizing grease is normally applied to the steel cores of all conductors,in addition to the protection offered by the galvanizing of the steel wires.One or more layers of the aluminum wires can if required,be supplied partiallly or fully greased.

Specifications
Aluminum conductor steel reinforced.
Biggest ACSR conductor supplier for China State Grid..
ACSR(Aluminum Conductor Steel Reinforced) is widely used in the overhead power distribution system of our country.
We can supply this conductor according to different recognized standards,such as IEC61089,BS215,ASTM B232,CSA C49,DIN48204,JIS C3110, customer special specification also can be satisfied.
The data sheets below show the most common standards,British standard.
British Sizes BS EN 50182:2001
STRANDARD:
BS 215 PART 2
code name: mole ,aquirrel ,gophel , weasel , fox , ferret , rabbit , minik , skunk , beaver , horse , racoon , otter , cat , hare , dog , coyote
ASTM B232
code name: turkey , swan , swanate , sparrow, robin , raven , quail , pigeon , penguin , waxwing , partridge , ostrich , merlin ,linner , oriole , chickadee , brant , ibis ,lark ,pelican , flicker , hawk ,hen ,osprey , parakeet , dove ,eagle ,peacock , squab , wood duck , teal , rook , grosbeak , swift ,scoter

Code Number Stranding& Wire Diameter Approx Sectional Area ApproxWeight Breaking Load DC Resistance
Overall
Al Steel Diameter Al Steel Total
mm mm mm mm 2 mm 2 mm 2 Kg/km KN Ohm/km
16 6/1.84 1/1.84 5.53 16 2.67 18.7 64.6 6.08 1.7934
25 6/2.30 1/2.30 6.91 25 4.17 29.2 100.9 9.13 1.1478
100 6/4.61 1/4.61 13.8 100 16.7 117 403.8 34.33 0.2869
125 18/2.97 1/2.97 14.9 125 6.94 132 397.9 29.17 0.2304
160 18/3.36 1/3.36 16.8 160 8.89 169 509.3 36.18 0.18
250 22/3.80 7/2.11 21.6 250 24.6 275 880.6 68.72 0.1154
400 54/3.07 7/3.07 27.6 400 51.9 452 1510.3 123.04 0.0723
450 54/3.26 7/3.26 29.3 450 58.3 508 1699.1 138.42 0.0643
500 54/3.43 7/3.43 30.9 500 64.8 565 1887.9 153.8 0.0578
560 54/3.63 19/2.18 32.7 560 70.9 631 2103.4 172.59 0.0516
630 54/3.85 19/2.31 34.7 630 79.8 710 2366.3 191.77 0.0459
710 54/4.09 19/2.45 36.8 710 89.9 800 2666.8 216.12 0.0407
800 72/3.76 7/2.51 37.6 800 34.6 835 2480.2 167.41 0.0361
900 72/3.99 7/2.66 39.9 900 39.9 939 2790.2 188.33 0.0321

AAAC-All aluminum alloy conductors
This section deals with heat-treatable magnesium silicon type aluminum alloys to BS EN 50182,the electrical and mechanical properties of which all fall within the values suggested by Publication 104 of the international Electro technical Commission.Conductors to all other recognized specifications can also be supplied.
The alloys referred to have higher strength but lower conductivity than pure aluminum.Being lighter,alloy conductors can sometimes be used to advantage in place of the more conventional ACSR;having lower breaking loads than the latter,their use becomes particularly favorable when ice and win loadings are low.

Size Calculated area Stranding and
wire diameter
Overall
diameter
Linear
mass
Rated strength Max. DC
resistance
at 20ºC
mm 2 mm 2 mm mm kg/km daN Ω/km
16 15.89 7/1.70 5.1 44 290 1.8018
25 24.25 7/2.10 6.3 67 425 1.1808
35 34.36 7/2.50 7.5 94 585 0.8332
50 49.48 7/3.00 9.0 135 810 0.5786
50 48.36 19/1.80 9.0 133 860 0.5950
70 65.82 19/2.10 10.5 181 1150 0.4371
95 93.27 19/2.50 12.5 256 1595 0.3084
120 117.00 19/2.80 14.0 322 1910 0.2469
150 147.10 37/2.25 15.2 406 2570 0.1960
185 181.60 37/2.50 17.5 501 3105 0.1587
240 242.54 61/2.25 20.2 670 4015 0.1191
300 299.43 61/2.50 22.5 827 4850 0.09650
400 400.14 61/2.89 26.0 1105 6190 0.07221
500 499.83 61/3.23 29.1 1381 7600 0.05781
625 626.20 91/2.96 32.6 1733 9690 0.04625
800 802.10 91/3.35 36.8 2219 12055 0.03611
1000 999.71 91/3.74 41.1 2766 14845 0.02897

Tags: , ,

Contact us

 

 

 

Success! Thanks for Your Request.
Error! Please Try Again.