Bare Conductor AAC Ant BS215 Standard
Product Description
1. AAC Conductor Standard available such as IEC61089, BS215, CSA 61089, ASTM B-231, DIN 48201, etc.
2. AAC Conductor is widely used in power transmission lines with various voltage levels. It has good characteristics such as simple structure, convenient installation and maintenance, low cost for the line, large transmission capacity and are also suitable for laying across rivers and valleys where special geographical textures exist.
3. Strands no.: 7 Strands, 19 Strands, 37 Strands, 61Strands, 91 Strands, 127Strands
4. Cross-section area: 16~1500 mm2, 4AWG ~ 3000KMCIL
5. AAC Conductor insulated with XLPE/PE/PVC can be supplied as per the customers` requirement.
Note: Corrosion protection grease is available according to customer`s requirement.
Certificate available: ISO, CE, SGS, SONCAP, BV, COC etc.
For further information, pls contact us.
| Specification | Area | Number of wires |
Diameter | Linear mass | Rated strength | DC resistance | |
| Wire | Cond | ||||||
| mm2 | mm | mm | Kg/km | kN | ohm/km | ||
| 10 | 10 | 7 | 1.35 | 4.05 | 27.4 | 1.95 | 2.8633 |
| 16 | 16 | 7 | 1.71 | 5.12 | 43.8 | 3.04 | 1.7896 |
| 25 | 25 | 7 | 2.13 | 6.40 | 68.4 | 4.50 | 1.1453 |
| 40 | 40 | 7 | 2.70 | 8.09 | 109.4 | 6.80 | 0.7158 |
| 63 | 63 | 7 | 3.39 | 10.2 | 172.3 | 10.39 | 0.4545 |
| 100 | 100 | 19 | 2.59 | 12.9 | 274.8 | 17.00 | 0.2877 |
| 125 | 125 | 19 | 2.89 | 14.5 | 343.6 | 21.25 | 0.2302 |
| 160 | 160 | 19 | 3.27 | 16.4 | 439.8 | 26.40 | 0.1798 |
- Next: AAC/ACSR/AAAC/Aacsr Overhead Line Conductor-Bare Conductor
- Previous: Copperweld Conductor/Copper Clad Steel Conductor
