Aluminum Conductor Steel Reinforced ACSR Conductor

Aluminum Conductor Steel Reinforced ACSR Conductor

Aluminum Conductor Steel Reinforced ACSR Conductor

ACSR

Jinyuan

ISO9001, CCC

Overhead

Round Wire

None

None

Aluminum and Steel

Overhead, Industry

Stranded

Bare

Aluminum and Steel

High

HT

Wooden Drums

aluminum

China

7614100000

Product Description

Aluminum Conductor Steel Reinforced ACSR conductor
1.Applications
ACSR,AAC,AAAC,ASCSR&ACAR conductor widely used in power transmission lines with various voltage levels. since they have such good characteristics as simple structure, convenient installation and maintenance, low cost for the line, large transmission capacity and are also suitable for laying across rivers and valleys where special geographical teatures exist.

2. Specification:
 
(1) all aluminium conductor (AAC)
(2) all aluminimum alloy conductor(AAAC)
(3) aluminum conductor steel reinforced (ACSR)
(4) anti-corrosion type ACSR
(5) aluminimum conductor aluminimum clad steel reinforced(ACSR/AW)
(6)rear earth aluminimum conductor steel reinforced(ACSR/RE)
(7)aluminimum conductor aluminimum alloy reinforced(ACAR)

3.Service Performance
(1).The permissible long-time operating temperature for aerial conductor electronic cable is 70oC.
(2).Under the circumstance that rare climate is occuring and ice coverage rate low in heavy ice area,the biggest stress of cable at the lowest point of the sag should not exceed 60% of the short-time destructive power.
(3).When connecting conductors,the AAC conductor electronic cable beside the connecting tube cant be prominent.Otherwise,the force on the operating conductors will be unbalanced.After connectors are install,the connecting tube should be painted by moisture-proof varnish in order to protect it from corrosion.
(4).Under installaion,the arc downing stress of all the conductors should be the same.With in the permissible distance of crossing buildings or dropping to the ground,the stress can be 10-15% higher than regular stress.
 
4.Material Standard:IEC83, IEC1089, 31, B232, BS215, DIN48204
 (1). Standard: IEC61089, BS215 part2, ASTM B232, DIN48204, BS EN50182 
(2). Specification: ACSR is composed by bare concentric-lay-stranded galvanized steel  wire(s) with aluminum wires surrounded by one or more layers of helically. Greased ACSR can also be supplied. 
(3). Application: ACSR is widely used in overhead electric power transmission and distribution lines with various voltage levels
 
We can supply this conductor according to different recognized standards, such as IEC61089, BS215, BS EN 50182: 2001, STM B231, CSA C49, DIN480201, JIS C3109, customer special specification also can be satisfied. 
 
5.Technical details
 AAC Technical Characteristics Based on Standard DIN 48201 / DIN EN50182
 

Code number Area Number of wires Wire    diameter Conductor diameter Linear mass Rated strength D.C. resistance at 20oC
mm2 No. mm mm kg/km kN Ω/km
16 15.9 7 1.7 5.1 43.4 3.02 1.7986
25 24.2 7 2.1 6.3 66.3 4.36 1.1787
35 34.4 7 2.5 7.5 93.9 6.01 0.8317
50 49.5 7 3 9 135.2 8.41 0.5776
50 48.3 19 1.8 9 132.9 8.94 0.5944
70 65.8 19 2.1 10.5 180.9 11.85 0.4367
95 93.3 19 2.5 12.5 256.3 16.32 0.3081
120 117 19 2.8 14 321.5 19.89 0.2456
150 147.1 37 2.25 15.8 405.7 26.48 0.196
185 181.6 37 2.5 17.5 500.9 31.78 0.1588
240 242.5 61 2.25 20.3 671.1 43.66 0.1193
300 299.4 61 2.5 22.5 828.5 52.4 0.0966

 
ACSR Technical Characteristics Based on Standard BS 215-2  
 

Code name Nominal aluminium area Stranding and wire    diameter Sectional area of aluminium Total sectional area Approx. overall diameter Approx. mass Calculated D.C. resistance at 20oC Calculated breaking load
Al Steel
mm2 No./mm mm2 mm2 mm kg/km Ω/km kN
RABBIT 50 6/3.35 1/3.35 52.88 61.7 10.05 214 0.5426 18.35
DOG 100 6/4.72 7/1.57 105 118.5 14.15 394 0.2733 32.7
WOLF 150 30/2.59 7/2.59 158.1 194.9 18.13 726 0.1828 69.2
DINGO 150 18/3.35 1/3.35 158.7 167.5 16.75 506 0.1815 35.7
LYNX 175 30/2.79 7/2.79 183.4 226.2 19.53 842 0.1576 79.8
ZEBRA 400 54/3.18 7/3.18 428.9 484.5 28.62 1621 0.0674 131.9

 
 
 AAAC Technical Characteristics Based on Standard BS 3242 
 

Code name Nominal aluminium area Stranding and wire    diameter Sectional area Approx. overall diameter Approx. mass Calculated D.C. resistance at 20oC Calculated breaking load
mm2 No./mm mm2 mm kg/km Ω/km kN
ALMOND 25 7/2.34 30.1 7.02 82 1.094 8.44
CEDAR 30 7/2.54 35.47 7.62 97 0.9281 9.94
FIR 40 7/2.95 47.84 8.85 131 0.688 13.4
HAZEL 50 7/3.30 59.87 9.9 164 0.5498 16.8
OAK 100 7/4.65 118.9 13.95 325 0.2769 33.3
ASH 150 19/3.48 180.7 17.4 497 0.183 50.65
ELM 175 19/3.76 211 18.8 580 0.1568 59.1
UPAS 300 37/3.53 362.1 24.71 997 0.09155 101.5

Tags: , ,

Contact us

 

 

 

Success! Thanks for Your Request.
Error! Please Try Again.