Aluminum Conductor Steel Reinforced/ACSR
Product Description
1. Applications
Used as bare overhead transmission cable and as primary and secondary distribution cable. ACSR offers optimal strength for line design. Variable steel core stranding enables desired strength to be achieved without sacrificing ampacity.
The mixed construction of ACSR makes it a very flexible medium from a design point of view. By
Varying the relative proportions of aluminium and steel the ideal conductor for any particular application can
Be produced. Generally, ACSR consists of a galvanized steel core of 1 wire, 7 wires or 19 wires surrounded
By concentric layers of aluminium wire. When a conductor with a high current carrying capacity and
Comparatively low strength is required, special constructions are available with a high aluminium content.
Protection against Corrosion
A coating of non-oxidizing grease is normally applied to the steel cores of all conductors, in addition to
The protection offered by the galvanizing of the steel wires. One or more layers of the aluminium wires can, if
Required, be supplied partially or fully greased.
2. Construction
Bare aluminum alloy 1350-H-19 wires, concentrically stranded about a Class A galvanized coated steel core wire.
3. Specifications
ACSR bare conductor meets or exceeds the following ASTM specifications:
B-230 Aluminum Wire, 1350-H19 for Electrical Purposes
B-231 Aluminum Conductors, Concentric-Lay-Stranded
B-232 Aluminum Conductors, Concentric-Lay-Stranded, Coated Steel Reinforced (ACSR)
B-341 Aluminum-Coated Steel Core Wire for Aluminum Conductors, Steel Reinforced (ACSR/AZ)
B-502 Aluminum-Coated Steel Core Wire for Aluminum Conductors, Steel Reinforced (ACSR/AW)
B-498 Zinc-Coated Steel Core Wire for Aluminum Conductors, Steel Reinforced (ACSR/AZ)
B-500 Zinc Coated and Aluminum Coated Stranded Steel Core for Aluminum Conductors, Steel Reinforced (ACSR)
4. Manufactured standard:
ASTM B-232, BS EN-50182, CSA C 61089, AS/NZS 3607, DIN 48204, IEC 61089, GB/T 1179, JIS 3110
5. Conductor type: Max. cross-section 3500MCM/1750mm2, Max. stranded number 127Nos.
| ACSR Technical characteristics / DIN 48204 | |||||||||
| Area | Standing and wire diameter | Overall diameter | Nominal breaking load | Maximum resistance at 20°C | |||||
| Nominal. | Actual | Total. | |||||||
| Al/Steel– | Al | Steel | Total | Aluminum | Steel | ||||
| mm 2 | mm 2 | mm 2 | mm | mm | mm | kg/km | daN | Ω/km | |
| 16/2.5 | 15.00 | 2.50 | 17.80 | 6/1.80 | 1/1.80 | 5.40 | 62 | 595 | 1.87800 |
| 25/4.0 | 23.80 | 4.00 | 27.80 | 6/2.25 | 1/2.5 | 6.80 | 97 | 920 | 1.20020 |
| 35/6.0 | 34.30 | 5.70 | 40.00 | 6/2.70 | 1/2.70 | 8.10 | 140 | 1265 | 0.83520 |
| 44/32.0 | 44.00 | 31.70 | 75.70 | 14/2.00 | 7/2.40 | 11.20 | 372 | 4500 | 0.65730 |
| 50/8.0 | 48.30 | 8.00 | 56.30 | 6/3.20 | 1/3.20 | 9.60 | 196 | 1710 | 0.59460 |
| 50/30 | 51.20 | 29.80 | 81.00 | 12/2.33 | 7/2.33 | 11.70 | 378 | 4380 | 0.56430 |
| 70/12 | 69.90 | 11.40 | 81.30 | 26/1.85 | 7/1.44 | 11.70 | 284 | 2680 | 0.41300 |
| 95/15 | 94.40 | 15.30 | 109.70 | 26/2.15 | 7/1.67 | 13.60 | 383 | 3575 | 0.30580 |
| 95/55 | 96.50 | 56.30 | 152.80 | 12/3.20 | 7/3.20 | 16.00 | 712 | 7935 | 0.29920 |
| 105/75 | 105.70 | 75.50 | 181.50 | 14/3.10 | 9/2.25 | 17.50 | 891 | 10845 | 0.27350 |
| 120/20 | 121.06 | 19.80 | 141.40 | 26/2.44 | 7/1.90 | 15.50 | 494 | 4565 | 0.23740 |
| 120/70 | 122.00 | 71.30 | 193.30 | 12/3.60 | 7/3.60 | 18.00 | 90 | 10000 | 0.23640 |
| 125/30 | 127.90 | 29.80 | 157.70 | 30/2.33 | 7/2.33 | 16.30 | 591 | 5760 | 0.22590 |
| 150/25 | 148.90 | 24.20 | 173.10 | 26/2.70 | 7/2.10 | 17.10 | 605 | 5525 | 0.19390 |
| 170/40 | 171.80 | 40.10 | 211.90 | 30/2.70 | 7/2.70 | 18.90 | 794 | 7675 | 0.16820 |
| 185/30 | 183.80 | 29.80 | 213.60 | 26/3.00 | 7/2.33 | 19.00 | 746 | 6620 | 0.15710 |
| 210/35 | 209.10 | 34.10 | 243.20 | 26/3.20 | 7/2.49 | 20.30 | 850 | 7490 | 0.13800 |
| 210/50 | 212.10 | 49.50 | 261.60 | 30/3.00 | 7/3.00 | 21.00 | 981 | 9390 | 0.13620 |
| 230/30 | 230.90 | 29.80 | 260.70 | 24/3.50 | 7/2.33 | 21.00 | 877 | 7310 | 0.12490 |
| 240/40 | 243.00 | 39.50 | 282.50 | 26/3.45 | 7/2.68 | 21.90 | 987 | 8640 | 0.11880 |
| 265/35 | 263.70 | 34.10 | 297.80 | 24/3.74 | 7/2.49 | 22.40 | 1002 | 8305 | 0.10940 |
| 300/50 | 304.30 | 49.50 | 353.70 | 26/3.86 | 7/3.00 | 24.50 | 1236 | 10700 | 0.09487 |
| 305/40 | 304.60 | 39.50 | 344.10 | 54/2.68 | 7/2.68 | 24.10 | 1160 | 9940 | 0.09490 |
| 340/30 | 339.30 | 29.80 | 369.10 | 48/3.00 | 7/2.33 | 25.00 | 1180 | 9290 | 0.08509 |
| 380/50 | 382.00 | 49.50 | 431.50 | 54/3.00 | 7/3.00 | 27.00 | 1453 | 12310 | 0.08509 |
| 385/35 | 386.00 | 34.10 | 420.10 | 48/3.20 | 7/2.49 | 26.70 | 1344 | 10480 | 0.07573 |
| 435/55 | 434.03 | 59.30 | 490.60 | 54/3.20 | 7/3.20 | 28.80 | 1653 | 13645 | 0.07478 |
| 450/40 | 448.70 | 39.50 | 488.20 | 48/3.45 | 7/2.68 | 28.70 | 1561 | 12075 | 0.06656 |
| 490/65 | 490.30 | 63.60 | 553.90 | 54/3.40 | 7/3.40 | 30.60 | 1866 | 15310 | 0.06434 |
| 495/35 | 494.10 | 34.10 | 528.20 | 45/3.74 | 7/2.49 | 29.90 | 1646 | 12180 | 0.05846 |
| 510/45 | 510.20 | 45.30 | 555.50 | 48/3.68 | 7/2.87 | 30.70 | 1778 | 13665 | 0.05655 |
| 550/70 | 550.00 | 71.30 | 621.30 | 54/3.60 | 7/3.60 | 32.40 | 2092 | 17060 | 0.05259 |
| 560/50 | 561.70 | 49.50 | 611.20 | 48/3.86 | 7/3.00 | 32.20 | 1954 | 14895 | 0.05140 |
| 570/40 | 565.50 | 39.50 | 610.30 | 45/4.00 | 7/2.68 | 32.20 | 1888 | 13900 | 0.05108 |
| 650/45 | 698.50 | 45.30 | 653.49 | 45/4.30 | 7/2.87 | 34.40 | 2163 | 15552 | 0.04420 |
| 680/85 | 678.80 | 86.00 | 764.80 | 54/4.00 | 19/2.40 | 36.00 | 2570 | 21040 | 0.04260 |
| 1045/45 | 1045.58 | 45.30 | 1090.90 | 72/4.30 | 7/2.87 | 43.00 | 3249 | 21787 | 0.02770 |
Certifications
Production Equipment
Test Equipment
Our Services
1. Sufficient support for our tendering representatives.
2. Qualification documents support
3. OEM service available based on official & legal authorization.
4. Strict quality control system.
5. Faster lead time than our competitors.
6. Excellent quality with reasonable price.
7. Strong technical support (technical data, drawing, etc.)
8. Cable solutions to your particular requirements.
9. Free sample is available with economic express fee.
10. Factory acceptance test assistant
11. Container loading design and handling
FAQ
Why choose us ?
1. Geographical location and convenient transportation, saving transportation costs
2. Full range of products, good reputation.
3. The leading edge technology. Different dedicated engineers and technicians for factory production, domestic sales and foreign sales, service and other jobs.
4. The sophisticated management system and management team. ISO9001,14001 and GB / T28001 passed. Computer management system for sales and production, etc.
5. Advanced service concept and positive attitude.
