Aluminum Alloy Conductor Steel Reinforced Aacsr to ASTM/BS/IEC Standard

Aluminum Alloy Conductor Steel Reinforced Aacsr to ASTM/BS/IEC Standard

Aluminum Alloy Conductor Steel Reinforced Aacsr to ASTM/BS/IEC Standard

AACSR

Bare

Stranded

Overhead

Aluminum Alloy and Steel Wire

Bare

Bare

Round Wire

Power Transmission

ISO9001, CE, CCC

Rmjt

10-1000mm2

Aluminium Alloy Wire

ASTM BS DIN IEC Jb GB GOST

7-91

6/1+26/7+84/19

300000square Meters

RMJT

Wooden Drum or Steel Wooden Drum

ASTM CSA DIN IEC

Henan, China

7614100000

Product Description
Aluminum Alloy Conductor Steel Reinforced — AACSR

1.Application
The AACSR conductors are also suitable for use in all practical transmission towers,and other structures. Application range from extra high voltage(EHV) transmission lines to sub-service spans at distribution or utilization voltages on private premises as like as ACSR.
AACSR(Aluminum Alloy Conductor Steel Reinforced) has also a long service record because of its economy ,dependability, and strength to weight ratio. The combined light weight and high conductivity of aluminum with strength of the steel cores enable higher tensions ,less sag,and longer spans than any alternative as like as ACSR.Compared with ACSR ,the tensile strength of aluminum conductor is more strong.

2. Construction:
Aluminum Alloy 6201 wires and the steel cores are concentrically stranded and wrapped helically around a central wire. The additional corrosion protection is available through the application of grease to the cores or infusion of the complete cable with grease.

3.Standard:
ASTM B711,DIN 48206,IEC61089

4.Specification
ASTM B711

Nominal Area Alloy area Steel Area No. of alloy wires Dia. Of alloy wire No. of Steel Wires Dia. Of steel wire Overall Diameter Linear weight Rated Tensile strength Max. DC Resistance at 20°C
mm² mm² mm² mm mm mm kg/km kN Ohm/km
163 140 23 26 2.62 7 2.04 16.6 560 75 0.24
173 140 33 30 2.44 7 2.44 17.1 650 87 0.24
186 160 26 26 2.8 7 2.18 17.7 645 85.6 0.21
291 250 41 26 3.5 7 2.72 22.2 1010 129 0.135
308 250 58 30 3.26 7 3.26 22.8 1145 156 0.135
326 280 46 26 3.7 7 2.88 23.4 1140 144 0.12
345 280 65 30 3.45 7 3.45 24.2 1280 171 0.12
367 315 52 26 3.93 7 3.06 24.9 1276 163 0.107
387 315 72 30 3.66 19 2.2 25.6 1433 190 0.107
413 355 58 26 4.17 7 3.24 26.4 1433 183 0.095
436 355 81 30 3.88 19 2.33 27.2 1614 211 0.095
901 800 101 54 4.34 19 2.6 39 3000 363 0.042
973 900 73 84 3.69 19 2.21 40.6 3062 355 0.0374
1081 1000 81 84 3.89 19 2.33 42.8 3395 391 0.0337
1211 1120 91 84 4.12 19 2.47 45.3 3803 439 0.03
1352 1250 102 84 4.35 19 2.61 47.8 4250 490 0.027

IEC61089

Code Number Steel ratio Area Number of wires Wire diam Diameter Linear mass Rated strength D.C. resistance
Alum, Steel Total Al St. Alum. Steel Core Cond.
% mm2 mm2 mm2 mm mm mm mm kg/km kN Ohm/km
16 17 18.4 3.07 21.5 6 1 1.98 1.98 1.98 5.93 74.4 9.88 1.7934
25 17 28.8 4.8 33.6 6 1 2.47 2.47 2.47 7.41 116.2 15.25 1.1478
40 17 46 7.67 53.7 6 1 3.13 3.13 3.13 9.38 185.9 24.17 0.7174
63 17 72.5 12.1 84.6 6 1 3.92 3.92 3.92 11.8 292.8 37.58 0.4555
100 6 115 6.39 121 18 1 2.85 2.85 2.85 14.3 366.4 42.97 0.2880
125 6 144 7.99 152 18 1 3.19 3.19 3.19 16 458.0 53.47 0.2304
125 16 144 23.4 167 26 7 2.65 2.06 6.19 16.8 579.9 76.42 0.2310
160 6 184 10.2 194 18 1 3.61 3.61 3.61 18 586.2 68.03 .0.1800
160 16 184 30 214 26 7 3.00 2.34 7.01 19 742.3 96.61 0.1805
200 6 230 12.8 243 18 1 4.04 4.04 4.04 20.2 732.8 85.04 0.1440
200 16 230 37.5 268 26 7 3.36 2.61 7.83 21.3 927.9 120.77 0.1444
250 10 288 28.3 316 22 7 4.08 2.27 6.8 23.1 1013.5 124.72 0.1154
250 16 288 46.9 335 26 7 3.75 2.92 8.76 23.8 1159.8 150.96 0.1155
315 7 363 25.1 388 45 7 3.20 2.14 6.41 25.6 1196.5 143.3 0.0917
315 16 363 59 422 26 7 4.21 3.28 9.83 26.7 1461.4 188.44 0.0917
400 7 460 31.8 492 45 7 3.61 2.41 7.22 28.9 1519.4 180.69 0.0722
400 13 460 59.7 520 54 7 3.29 3.29 9.88 29.7 1738.3 218.17 0.0723
450 7 518 35.8 554 45 7 3.83 2.55 7.66 30.6 1709.0 203.28 0.0642
450 13 518 67.1 585 54 7 3.49 3.49 10.5 31.5 1955.6 245.44 0.0643
500 7 575 39.8 615 45 7 4.04 2.69 8.07 32.3 1899.3 225.86 0.0578
500 13 575 74.6 650 54 7 3.68 3.68 11.1 33.2 2172.9 269.73 0.0578
560 7 645 44.6 689 45 7 4.27 2.85 8.54 34.2 2127.2 252.97 0.0516
560 13 645 81.6 726 54 19 3.90 2.34 11.7 35.1 2420.9 305.25 0.0516
630 4 725 31.3 756 72 7 3.58 2.39 7.16 35.8 2248.0 258.08 0.0459
630 13 725 91.8 817 54 19 4.13 2.48 12.4 37.2 2723.5 343.4 0.0459
710 4 817 35.3 852 72 7 3.80 2.53 7.6 38 2533.4 290.85 0.0407
710 13 817 104 921 54 19 4.39 2.63 13.2 39.5 3069.4 387.01 0.0407
800 4 921 39.8 961 72 7 4.04 2.69 8.07 40.4 2854.6 327.72 0.0361
800 8 921 76.7 997 84 7 3.74 3.74 11.2 41.1 3145.1 374.44 0.0362
900 4 1036 44.8 1081 72 7 4.28 2.85 8.56 42.8 3211.4 368.69 0.0321
900 8 1036 86.3 1122 84 7 3.96 3.96 11.9 43.6 3538.3 421.25 0.0322
1000 8 1151 93.7 1245 84 19 4.18 2.51 12.5 45.9 3916.8 471.67 0.0289
1120 8 1289 105 1394 84 19 4.42 2.65 13.3 48.6 4386.8 528.27 0.0258

5.Package
Packing in plastic reel, paper reel ,wooden drum,steel wooden drum or as customer’s requirement.

6.About us:
People’s Cable Group Co., Ltd. was founded in 2007, located in Zhengzhou Gongyi economic development zone. Our company has 2 factories (Zhitian factory and Zhulin factory), occupies total area of more than 300,000 square meters, with building area 230,000 square meters. The real capital assets more than USD 10 million , with total 500 staff members, 65 of which are professional and technical experts.

7.Certificate:
As first rank of the cable supplier in China, we have obtained CCC, ISO9001, ISO14001, OHSAS certificates, passed the SGS and BV test, and our brand "RMJT" be given China famous brand.

8.Customer Visit
We have a professional sales team with each of them has engaged in this job for 3-10 years, so that we can provide the comprehensive and professional technology for you. With the perfect quality and after sales service, till now we have exported to more than 80 countries, welcome to visit us and establish win-win relationship!

9. FAQ

(1)When can I get the price?
We usually quote within 6 hours after we get your inquiry. If you are very urgent to get the price, please call us or tell us in your e-mail so that we will regard your inquiry priority.

(2)How can I get a sample to check your quality?
After price confirmation, you can require for samples to check our quality. Sample is free, but the freight charge should be paid.

(3)How long can I expect to get the sample?
After you pay the freight charge and send us confirmed files, the samples will be ready for delivery in 3-7 days. The samples will be sent to you via express and arrive in 3-5 days. You can use your own express account or prepay us if you do not have an account.

(4)What about the lead time for mass production?
Honestly, it depends on the order quantity and the season you place the order. The best record we keep is delivering 10 kilometers cable within a week. Generally speaking, we suggest that you start inquiry two months before the date you would like to get the products at your country.

10.Contact us
People’s Cable Group Co.,Ltd
Factory ADD:No.13th,YongDing Road, Goingyi,Zhengzhou city, Henan province, China.
TEL:+86-371-55367868
FAX: +86-371-55367868
www.vwcable.com

Tags: , ,

Contact us

 

 

 

Success! Thanks for Your Request.
Error! Please Try Again.