All Aluminum Conductors AAAC 1000mm2 Cable with Greased AAAC Conductor Supplier

All Aluminum Conductors AAAC 1000mm2 Cable with Greased AAAC Conductor Supplier

All Aluminum Conductors AAAC 1000mm2 Cable with Greased AAAC Conductor Supplier




Aluminum Alloy

Low Voltage, Overhead







Drum /Steel Drum/Roll/as Per Customer Request


Product Description

Product Description

Brief Description:

This conductor is made from aluminium-magnesium-silicon alloy of high electrical conductivity containing enough magnesium silicide to give it better mechanical properties

 after treatment. These conductors are generally made out of aluminium alloy 6201. 

AAAC CONDUCTOR has a better corrosion resistance and better strength to weight ratio and improved electrical 

conductivity than ACSR CONDUCTOR on equal diameter basis.



AAAC aluminum alloy conductors are extensively used for overhead distribution and transmission lines adjacent to 

ocean coastlines where there can be a problem of corrosion in the steel of an ACSR construction.

 The aluminum alloy conductors are used in place of single-layer ACSR conductors (i.e., #6 to #4/0 AWG) to reduce power losses in overhead distribution and transmission 

lines. The inductive effect of the ACSR’s steel core is eliminated, hence increasing the operating efficiency of the line.




Standard 6201-T81 high strength aluminum conductors, conforming to ASTM Specification B-399,

 are concentric-lay-stranded, similar in construction and appearance to 1350 grade aluminum conductors. Standard 6201 alloy 

conductors are similar to other alloy conductors commercially known as Ardival, Aldrey or Almelec. 


They were developed to fill the need for an economical conductor for overhead applications requiring higher 

strength than that obtainable with 1350 grade aluminum conductors, but without a steel core.

The DC resistance at 20"C of the 6201-T81 conductors and of the standard ACSR of the same diameter are approximately the same. 

Conductors of the 6201 J81 alloys are harder and, therefore, have a greater resistance to abrasion than conductors

 of 1350-H 19 grade aluminum.


Features and Benefits:

Aluminum alloy conductors have a number of advantages over the use of the ACSR or all aluminum conductors. 

Lower power losses than for equivalent single aluminum-

layer ACSR conductors. (The inductive effect of the steel core in the ACSR is eliminated).

Simpler fittings than those required for ACSR.

Excellent corrosion resistance in environments conducive to galvanic corrosion in ACSR.

Strength and sag approximately the same as for equivalent 6/1 and 26/7 ACSR conductors.

Outside diameters are the same as for standard ACSR conductors, permitting interchangeability of fittings.

Greater resistance to abrasion than that for 1350 wires in all-aluminum or ACSR conductors.


Key Benefits:

· High tensile strength as compared to AAC conductor.

· Higher conductivity as compared to ACSR conductor.

· Better corrosion resistance than ACSR conductor.


Physical contents of alluminium alloy :

· Density – 2.70 kgm/dm3 at 20°C

· Coefficient of Linear Expansion – 23 x 10-6 / °C

· Resistivity – 0.0326 Ohms mm2/m at 20°C

· Constant Mass Temperature Coefficient (a) – 0.00360/ °C

· Material – Heat treated Al. Mg. Si. Alloy


Package:In coils, wooden drums, steel drums or steel-wooden drums.


We could producing according to the customers’ requirements.Welcome your request for any quotations!

Products Show
Our Company


Our Factory


Our Workshop



Our Warehouse


Our logistic 

Our Certifications
Customer Photo

Strong factory

JINSHUI CABLE GROUP in charge of 35 domestic sales agents and one trade company – Zhengzhou Jin Hang High-Tech Co., Ltd. Our trade company is mainly responsible for overseas markets. There are 638 staff members in our factory, including 18 experienced engineers, 52 lab assistants and 568 workers. Our asset reaches USD10,507,000. We have various advanced production lines and equipment, including 180 sets for production use and 40 sets for testing and measurement use. 

Canton fair 

attend China Import and Export Fair(another name Canton Fair) in Guangzhou city of China 

Favorable Comment

We insisted on the tenet of "pay adequate attention to every customer’s request". We insist on our principle of "Good quality results trust and honesty makes success". We sincerely welcome you to visit us.


Q: Are you trading company or manufacturer ?

A: We are factory.Jinshui Cable Group, founded in 1983 and formerly known as Zhengzhou 2nd Cable Plant, is the largest cables and wire and electrical products R&D and production base, sales and export base, and CNC logistics distribution base in central China, as well as Top-10 of China in comprehensive cables and wire strength.

Q: How long is your delivery time?

A: according to order quantity.Normally delivery date is 25 days .

Q: Do you provide samples ? is it free or extra ?

A: Yes, we could offer the sample for free charge for you to check the cable quality  but will not pay  the cost of freight.

Q: What is your terms of payment ?

A:Normally 30% paid as prepayment, balance paid before delivery. Or 100% L/C at sight.

Tags: , ,

Contact us