ADSS Cable Fitting Aluminium Alloy Dead End Grip Amour Rods
The suspension clamp is provided with black weather-resistant plastic coating of at least 1mm thickness to prevent the insulation of the phase conductors from chafing due to rubbing against the clamp.
1.Body and Pressure Pad:weather resistant aluminum alloy.
2.Plastic protection:weather and UV-radiation resistant plastic.
3.Nuts,washers&Bolt:hot-dip galvanized steel.
2.1 Mechanical performance:the grip force of the wire clamp is 1/10 bigger than the break force of the lead. It comply with GB2314-1997
2.2 Temperature rise performance: under the conditìon of big current, the temperature rise of connector is less than that of connection lead.
2.3 Heat circle performance:confirms to GB/T2317.3-2000,the beat circle trial standard for electric fitting.
2.4 Waterproof insulatìon performance:confirms to the relevant requirements in Part 2 of GB/TI3140.4-1998,
2.5 Resistance to corrosion performance: under the conditìon of SO, and salt fog, it can do three tìmes of fourteen days circle testìng.
2.6 Environmental aging performance:under the circumstance of ultraviolet, radiation, dry and moist, expose if with change of temperature and beat impulse for six weeks.
2.7 Fire-proof performance: insulation material of the connector withstands glowing filament test. Confirm to the requirements in Chapter4-1 0 of GBrr5169.4
- Next: 6pin Female Connector Heavy Duty Connector Rectangular Connector
- Previous: Low Price High Voltage Silicon Polymer 24kv Dropout Fuse Cutout