600/1000V Epr/XLPE Insulated Shipboard Power Cable

The product is suitable to used for up to and including 0.6/1kV power transmission, power system, lighting system, and control system, etc. in kinds of offshore buildings, such as ship, petroleum-exploitation platform and so on. DA/SA is flame-retardant, NA is flame-retardant and fire-resistant, SC is low-smoke, halogen-free, flame-retardant, and NC is low-smoke, halogen-free, flame-retardant, fire-resistant.

2 Specification &standards

IEC60228 IEC60092-350 IEC60092-359

IEC60092 351 IEC60332-1 IEC60332-3 Cat.A

IEC61034-2 IEC 60754-2 3A

3 Construction:

Conductor:tinner copper

Insulated:EPR or XLPE

Filler

Tape

Inner sheathe:PCP/CSP/PVC/PO(SHF1,SHF2)

Armored:tinned copper wire braid(Galvanized steel wire braid)

Outer Sheath:PVC/PCP/PO(SHF1,SHF2)

Flammability Features:

DA:Single cable flame retardant

SA:Bunched cable flame retardant

SC:Bunched cable flame retardant,halogen-free,low-smoke,low-toxicity

Specifications:

Cores:1.2.3.4.4.7.10.12.14.16.19.24.27.30.33.37

NominalCross-section Areas:0.75mm2,1mm2,1.5mm2,2.5mm2,4mm2,6mm2,10mm2,16mm2,25mm2,

35mm2,50mm2,70mm2,95mm2,120mm2,150mm2,185mm2,240mm2,300mm2

4 Operating Characteristics

1) Rated Voltage (A.C.): Uo/U 0.6/1kV

Operating Temperature: 90°C at normal

250°C at short circuit (lasts less than 5s)

2) Allowable Bending Radius (Min.):

Braided armored cable: 6D

Non braid armored cable: 4D (D≤25mm), D stands for over diameter of cable

6D (D>25mm), D stands for over diameter of cable

5 Certificates:

CCS,LR,ABS,DNV,BV,GL,NK,KR,RINA