2X10mm2 Service Cable Aluminum Conductor

Product Name:

Model NO.:

SAC

Type:

Insulated

Conductor Type:

Stranded

Application:

Overhead

Conductor Material:

Copper

Sheath Material:

PVC or PE

Insulation Material:

XLPE

Material Shape:

Round Wire

Range of Application:

Service Entrance

Certification:

ISO9001, CE, CCC

Brand:

Yifang

Sheath Color:

Black

Trademark:

Yifang

Transport Package:

Drum, Reel or According to Customers' Request

Specification:

drum

Origin:

China

HS Code:

8544492100

Product Description

Aerial Concentric Service Cable with Communication Cable
ne phase phase concentric cores Service Drop aerial Cables
Structure
Wires of Phase Conductor
Wires of Neutral Conductor
Factory Test Report

Pilot Communication pair of Cores

4.2.2.1	Typical construction		Material							Circular stranded plain annealed Aluminum conductors (Class 2) as specified in KS 04-1022 and shall comply with all provisions of KS 04-187, Left-hand direction of lay
			Direction of lay
4.2.2.2	Insulation		As per KS 04-1022, KS 04-188 and BS 6746							PVC compound – type TI 1 as specified in KS 04-1022, KS 04-188 and BS 6746
4.2.2.3	Min Thickness of insulation			As per KS 04-1022						1.55mm
4.2.3	Concentric layer
4.2.3.1	Neutral-earth conductor(Material & construction)
	Material		Plain anneal aluminum							Plain annealed Aluminum wires in accordance with KS 04-1022 and as required by clause 4 of BS 7870-3.20:2001
	Cover material		Polymeric compound
	Properties of cover material		Tensile strength			4 N/mm2				Comply
			Elongation,%			50				Comply
4.2.3.2	Communication cable
4.2.3.2.1	Construction
	The communication cable is a two (2)-core single equipment cables helically wrapped over the core cable adjacent to the earth-neutral conductors. The wires shall be stranded (class 2 of BS 6360:1991), which may be screened, for purposes of internal wiring of electronic and other equipment according to BS 4808-1:1972.
4.2.3.2.1.2	Material		As per BS 6360 and BS 2011, Test 2T, Method 1				Standard annealed Copper, smoothly drawn, uniform in quality, free from defects and uniformly coated with pure tin satisfying the mechanical requirements of BS 6360 and all conductors shall meet the test for soldering given in BS 2011, Test 2T – Method 1
4.2.3.2.1.3			Length of lay				Not exceed 20 times(146.5mm) the calculated diameter over the assembled conductor. The direction of lay of the strands is Right-hand
			Direction of lay of the strand
4.2.3.2.1.4	Joints	Shall be essentially smooth, and shall not have any sharp projections								No joint
4.2.3.2.1.5	Colours	Correspond with standard colours shown in IEC 60304:1982								White & Blue
4.2.3.2.2	Insulation
	Material	PVC compound – type TI 1as specified in KS 04-1022, KS 04-188 and BS 6746								PVC compound – type TI 1 as specified in KS 04-1022, KS 04-188 and BS 6746
	Dimensions	As per table 2								Min.1.55mm
4.2.3.3	Non hygroscopic string separation				Shall be approximately the same as the diameter on the individual insulated communication cables. Conformity shall be checked through visual examination as per BS7870-3.20:2001 clause 14.3
4.2.3.4	Application of concentric layer
	Lay direction		Right hand lay					Right hand lay
	Composition		Neutral &earth conductor and communication cable					Neutral &earth conductor and communication cable
	Application		Applied together with string separation					Either one or two string hygroscopic string separation shall be located on either side of the group of neutral-earth continuity conductor to separate them from the group of insulated communication cables
	Coverage		90%					90%
4.2.3.5	Binders		Synthetic binders tape					Overlapped Synthetic binders tape as per BS BS7870-3.20:2001 Clause 7
4.2.4	Over-sheath or outer Jacket
4.2.4.1	Material		As per KS 04-1022 and BS 6746						Extruded layer of Black PVC compound – type TM 1 as specified in KS 04-1022 and BS 6746 In accordance with KS 04-1022
	Oversheath testing		In accordance with KS 04-1022
4.2.4.2	Minimum thickness		Shall not fall below the values on Table 2 by>(15% + 0.1mm).						Min1.09
4.2.4.3	Non-metallic rip-cord		Shall be laid under the sheath						Laid under the sheath, incorporate the manufacturer’s identification colours.
			Shall incorporate the manufacturer’s identification colour
4.3	Standard sizes and characteristics		As per table 2, Table 3 and as per the requirement of clause 4 of BS 7870-3.20:2001.						comply with Table 2 and as per the requirement Of clause 4 of BS7870-3.20:2001