18AWG 16AWG 14AWG 12AWG 10AWG 8AWG Copper Wire

18AWG 16AWG 14AWG 12AWG 10AWG 8AWG Copper Wire

18AWG 16AWG 14AWG 12AWG 10AWG 8AWG Copper Wire

copper wire

Insulated

Stranded

Overhead, Heating, Underground

Copper

PVC

PVC

Round Wire

Flame Retardant

ISO9001, CCC

Rmjt

300/500V 450/750V

RMJT

Package in Rolls or as Your Requirements.

0.5mm2-400mm2

Henan, China

8544492100

Product Description
1.Applications:
THHN building wire is meant for use as general purpose wiring for installation in conduit or other recognized raceway.
THHN may also be used for machine tool, appliance and control circuit wiring.

2.Description of usage properties
The nylon sheathed cable has more excellences in physical and electrical performance than the PVC cable.

The cable has smaller outer diameter, lighter weight, less static friction coefficient than the same size of PVC cable, which greatly improve safety and convenience in installation and assembly of the cable.

It is self-lubrication, and has good resistance to corrosion, oil, acids, alkali, and moisture.
The cable is widely used in fixed installation, home appliance, lighting equipment, construction and aviation engine room with voltage up to 450/750V.

Its permitted long term working temperature shall be 70°C or 90°C, installation temperature shall be over 0°C, and maximum bending radius shall be not less than 4 times of outer diameter of the cable.

3.Approvals:
· UL listed Stds. 83 & 1063 as: Type THHN Wire 90°C in dry locations, Type THWN Wire 75°C in wet locations.
· A-A-59544, NEMA WC-5, UL-758
· CSA approval upon request

4.Description:
· Conductor:Bare copper, Soft Drawn
· Insulation:PVC
· Jacket:NYLON
· Standard Colors(denoted by a dash and number code following the part number below): Black (-0), Brown (-1), Red (-2), Orange (-3), Yellow (-4), Green (-5), Blue (-6), Violet (-7), Gray (-8), White (-9), Pink (-10), Tan (-11); Striping and Other colors available upon request.
· Gasoline & oil resistant – Type MTW 90°C Machine Tool Wire (stranded only) 105°C AWM, 80°C where exposed to oil.

UL 83 UL 1581

AWG/MCM mm2 Conductor Insulation Shealth Total Weight
Single Wire OD. PVC Nylon
No. Dia. thick min min OD. Thick mils mm OD.
mm mm mil mm mm mil mm mm mil mm mm kg/km
16 1.31 1 1.29 1.29 15 0.38 0.51 14 0.36 2.05 4 0.1 2.25 16.73
14 2.08 1 1.626 1.626 15 0.38 0.51 14 0.36 2.386 4 0.1 2.586 24.53
12 3.29 1 2.048 2.048 15 0.38 0.51 14 0.36 2.808 4 0.1 3.008 36.61
10 5.26 1 2.589 2.589 20 0.51 0.64 19 0.48 3.609 4 0.1 3.809 58
16 1.67 7 0.551 1.653 15 0.38 0.51 14 0.36 2.413 4 0.1 2.613 21.5
14 2.08 7 0.615 1.845 15 0.38 0.51 14 0.36 2.605 4 0.1 2.805 25.84
12 3.30 7 0.775 2.325 15 0.38 0.51 14 0.36 3.085 4 0.1 3.285 38.51
10 5.26 7 0.978 2.934 20 0.51 0.64 19 0.48 3.954 4 0.1 4.154 60.82
9 6.63 7 1.098 3.294 20 0.51 0.64 19 0.48 4.314 5 0.13 4.574 75.34
8 8.32 7 1.23 3.69 30 0.76 0.9 28 0.71 5.21 5 0.13 5.47 98.69
7 10.47 7 1.38 4.14 30 0.76 0.9 28 0.71 5.66 5 0.13 5.92 120.76
6 13.21 7 1.55 4.65 30 0.76 0.9 28 0.71 6.17 5 0.13 6.43 148.58
5 16.65 7 1.74 5.22 30 0.76 0.9 28 0.71 6.74 6 0.15 7.04 183.78
4 21.12 7 1.96 5.88 40 1.02 1.1 35 0.89 7.92 6 0.15 8.22 235.76
2 33.54 7 2.47 7.41 40 1.02 1.1 35 0.89 9.45 6 0.15 9.75 359.83
16 1.23 19 0.287 1.435 15 0.38 0.51 14 0.36 2.195 4 0.1 2.395 16.72
14 2.04 19 0.37 1.85 15 0.38 0.51 14 0.36 2.61 4 0.1 2.81 25.35
12 3.30 19 0.47 2.35 15 0.38 0.51 14 0.36 3.11 4 0.1 3.31 38.27
10 5.19 19 0.59 2.95 20 0.51 0.64 19 0.48 3.97 4 0.1 4.17 59.86
9 6.50 19 0.66 3.3 20 0.51 0.64 19 0.48 4.32 5 0.13 4.58 73.64
8 8.17 19 0.74 3.7 30 0.76 0.9 28 0.71 5.22 5 0.13 5.48 95.16
7 10.53 19 0.84 4.2 30 0.76 0.9 28 0.71 5.72 5 0.13 5.98 120.74
6 13.19 19 0.94 4.7 30 0.76 0.9 28 0.71 6.22 5 0.13 6.48 145.02
5 16.45 19 1.05 5.25 30 0.76 0.9 28 0.71 6.77 6 0.15 7.07 180.78
4 21.13 19 1.19 5.74 40 1.02 1.1 35 0.89 7.78 6 0.15 8.08 229.38
3 26.40 19 1.33 6.45 40 1.02 1.1 35 0.89 8.49 6 0.15 8.79 280.88
2 33.58 19 1.5 7.26 40 1.02 1.1 35 0.89 9.3 6 0.15 9.6 350.23
1 42.12 19 1.68 8.15 50 1.27 1.38 45 1.14 10.69 7 0.18 11.05 447.22
1/0 53.30 19 1.89 9.14 50 1.27 1.38 45 1.14 11.68 7 0.18 12.04 555.15
2/0 67.07 19 2.12 10.3 50 1.27 1.38 45 1.14 12.84 7 0.18 13.2 687.52
3/0 84.53 19 2.38 11.6 50 1.27 1.38 45 1.14 14.14 7 0.18 14.5 854.27
4/0 107.18 19 2.68 13 50 1.27 1.38 45 1.14 15.54 7 0.18 15.9 1068.65
250 125.72 37 2.08 14.2 60 1.52 1.67 55 1.4 17.24 8 0.2 17.64 1272.29
300 151.06 37 2.28 15.5 60 1.52 1.67 55 1.4 18.54 8 0.2 18.94 1512.81
350 177.29 37 2.47 16.8 60 1.52 1.67 55 1.4 19.84 8 0.2 20.24 1761.4
400 202.53 37 2.64 17.9 60 1.52 1.67 55 1.4 20.94 8 0.2 21.34 1999.42
500 252.89 37 2.95 19.7 60 1.52 1.67 55 1.4 22.74 8 0.2 23.14 2470.99
600 304.24 61 2.52 22 70 1.78 1.94 65 1.65 25.56 9 0.23 26.02 2998.91
650 328.87 61 2.62 22.9 70 1.78 1.94 65 1.65 26.46 9 0.23 26.92 3231.59
750 378.30 61 2.81 24.6 70 1.78 1.94 65 1.65 28.16 9 0.23 28.62 3697.59
1000 506.04 61 3.25 28.4 70 1.78 1.94 65 1.65 31.96 9 0.23 32.42 4896.32

Tags: , ,

Contact us

 

 

 

Success! Thanks for Your Request.
Error! Please Try Again.