1.1A Plastic Material Insulated Cable Suspension Clamp for ADSS Cable

1.1A Plastic Material Insulated Cable Suspension Clamp for ADSS Cable

1.1A Plastic Material Insulated Cable Suspension Clamp for ADSS Cable

1.1A

Injection Molding

GB

Line Fittings

Suspension Clamps

(16-95)mm2

Low Voltage 1kv

Mild Steel,Nylon Plus Fiber Glass PA66

SMICO

Export Carton

Suspension clamp

China

8536909000

Product Description

                  1.1A ABC Cable Aerial Electrical Fittings Suspension Connector

Introduction

The suspension clamp is  provided with black weather-resistant plastic coating of at least 1mm thickness to prevent the insulation of the phase conductors from chafing due to rubbing against the clamp.

Material

1.Body and Pressure Pad:weather resistant aluminum alloy.

2.Plastic protection:weather and UV-radiation resistant plastic.

3.Nuts,washers&Bolt:hot-dip galvanized steel.

Detail specification

MODEL CROSS-SECTION( mm2)
1.1A 16-95

(Performance testing) 
2.1 Mechanical performance:the grip force of the wire clamp is 1/10 bigger than the break force of the lead. It comply with GB2314-1997 
2.2 Temperature rise performance: under the conditìon of big current, the temperature rise of connector is less than that of connection lead.
2.3 Heat circle performance:confirms to GB/T2317.3-2000,the beat circle trial standard for electric fitting. 
2.4 Waterproof insulatìon performance:confirms to the relevant requirements in Part 2 of GB/TI3140.4-1998, 
2.5 Resistance to corrosion performance: under the conditìon of SO, and salt fog, it can do three tìmes of fourteen days circle testìng. 
2.6 Environmental aging performance:under the circumstance of ultraviolet, radiation, dry and moist, expose if with change of temperature and beat impulse for six weeks. 
2.7 Fire-proof performance: insulation material of the connector withstands glowing filament test. Confirm to the requirements in Chapter4-1 0 of GBrr5169.4

Tags: , ,

Contact us

 

 

 

Success! Thanks for Your Request.
Error! Please Try Again.