0.6/1kv Copper or Aluminum PVC Insualted Armored Electrical Power Cable
Product Description
Operating Characteristics of armed cable :
Rated voltage: 0.6/1(1.2)kV
Max. permissible continuous operating temperature of conductor: 70 °C
Max. temperature of conductor during short-circuit (5s max. duration) shall not exceed:
Nominal cross section of conductor ≤300mm2: 160 °C
Nominal cross section of conductor >300mm2: 140 °C
The ambient temperature under installation should not be lower than: 0 °C The bending radius of cable is recommended as following:
For single core cable: not less than 15 times of the diameter of cable
For multi-core cable: not less than 12 times of the diameter of cable
When the armored single core cable used for Alternative Current(AC) system, the armoring material should be non- magnetic.
3. Application
The cable is used for fixed installations such as electric power distribution networks or industrial installations, which is laid in high fall area, able to bear external mechanical force, and certain pulling force.
4. Manufacturing Standards
IEC 60502-1 & Chinese national standard GB/T 12706-2008
We can produce above cables according to popular international standards such as ASTM,BS,DIN,NF &AS/NZ also.
5. Technical data of armor cable
Main technical data of 0.6/1KV, four cores, Aluminum conductor, PVC insulated, galvanized steel wire armored and PVC or PE sheath cables
CABLE CONSTRUCTION 0.6/1KV AL/PVC/SWA/PVC or PE
| Cable size | Conductor type | Nominal thickness of PVC insulation (mm) | Approx. diameter of steel wire(mm) | Nominal thickness of PVC sheath(mm) | Approx. cable overall diameter (mm) | Max. D.C resistance @ 200C (Ω/km) |
| 4×1.5mm2 | RE or RM | 0.8 | 0.8 | 1.8 | 14.9 | 18.1 |
| 4×2.5mm2 | RE or RM | 0.8 | 1.25 | 1.8 | 16.7 | 12.1 |
| 4x4mm2 | RE or RM | 1.0 | 1.25 | 1.8 | 18.8 | 7.41 |
| 4x6mm2 | RE or RM | 1.0 | 1.25 | 1.8 | 20.1 | 4.61 |
| 4x10mm2 | RM | 1.0 | 1.6 | 1.8 | 23.9 | 3.08 |
| 4x16mm2 | RM | 1.0 | 1.6 | 1.8 | 26.4 | 1.91 |
| 4x25mm2 | SM | 1.2 | 1.6 | 1.9 | 27.8 | 1.20 |
| 4x35mm2 | SM | 1.2 | 1.6 | 2.0 | 30.2 | 0.868 |
| 4x50mm2 | SM | 1.4 | 1.6 | 2.1 | 33.7 | 0.641 |
| 4x70mm2 | SM | 1.4 | 2.0 | 2.3 | 38.3 | 0.443 |
| 4x95mm2 | SM | 1.6 | 2.0 | 2.4 | 43.2 | 0.320 |
| 4x120mm2 | SM | 1.6 | 2.5 | 2.6 | 47.8 | 0.253 |
| 4x150mm2 | SM | 1.8 | 2.5 | 2.7 | 51.8 | 0.206 |
| 4x185mm2 | SM | 2.0 | 2.5 | 2.9 | 56.9 | 0.164 |
| 4x240mm2 | SM | 2.2 | 2.5 | 3.1 | 63.5 | 0.125 |
| 4x300mm2 | SM | 2.4 | 3.15 | 3.4 | 71.1 | 0.100 |
| 4x400mm2 | SM | 2.6 | 3.15 | 3.7 | 78.5 | 0.0778 |
Note: RE= round conductor RM = stranded conductor SM=sectional conductor
Main technical data of 0.6/1KV, 3+1 cores, Aluminum conductor, PVC insulated, galvanized steel wire armored and PVC or PE sheath cables
CABLE CONSTRUCTION 0.6/1KV AL/PVC/SWA/PVC or PE
|
Cable size |
Conductor type | Nominal thickness of PVC insulation(mm) |
Approx. diameter of steel wire(mm) |
Nominal thickness of PVC sheath (mm) |
Approx. cable overall diameter (mm) |
Max. D.C resistance @ 200C (Ω/km) |
|||
| Phase core | Earth core | Phase core | Earth core | Phase core | Earth core | ||||
| 3×2.5+1.5mm2 | RE | RE | 0.8 | 0.8 | 1.25 | 1.8 | 16.1 | 12.1 | 18.1 |
| 3×4+2.5mm2 | RE | RE | 1.0 | 0.8 | 1.25 | 1.8 | 18.3 | 7.41 | 12.1 |
| 3×6+4mm2 | RE | RE | 1.0 | 1.0 | 1.25 | 1.8 | 19.8 | 4.61 | 7.41 |
| 3×10+6mm2 | RM | RE | 1.0 | 1.0 | 1.6 | 1.8 | 23.5 | 3.08 | 4.61 |
| 3×16+10mm2 | RM | RM | 1.0 | 1.0 | 1.6 | 1.8 | 26.2 | 1.91 | 3.08 |
| 3×25+16mm2 | SM | RM | 1.2 | 1.0 | 1.6 | 1.8 | 28.0 | 1.20 | 1.91 |
| 3×35+16mm2 | SM | RM | 1.2 | 1.0 | 1.6 | 1.8 | 29.6 | 0.868 | 1.91 |
| 3×50+25mm2 | SM | SM | 1.4 | 1.2 | 1.6 | 2.0 | 32.8 | 0.641 | 1.20 |
| 3×70+35mm2 | SM | SM | 1.4 | 1.2 | 2.0 | 2.1 | 37.4 | 0.443 | 0.868 |
| 3×95+50mm2 | SM | SM | 1.6 | 1.4 | 2.0 | 2.3 | 41.7 | 0.320 | 0.641 |
| 3×120+70mm2 | SM | SM | 1.6 | 1.4 | 2.5 | 2.4 | 46.2 | 0.253 | 0.443 |
| 3×150+70mm2 | SM | SM | 1.8 | 1.4 | 2.5 | 2.5 | 49.6 | 0.206 | 0.443 |
| 3×185+95mm2 | SM | SM | 2.0 | 1.6 | 2.5 | 2.7 | 54.5 | 0.164 | 0.320 |
| 3×240+120mm2 | SM | SM | 2.2 | 1.6 | 2.5 | 2.9 | 60.3 | 0.125 | 0.253 |
| 3×300+150mm2 | SM | SM | 2.4 | 1.8 | 2.5 | 3.1 | 65.9 | 0.100 | 0.206 |
| 3×400+185mm2 | SM | SM | 2.6 | 2.0 | 3.15 | 3.5 | 74.1 | 0.0778 | 0.164 |
Note: RE= round conductor RM = stranded conductor SM=sectional conductor
Main technical data of 0.6/1KV, five cores, Aluminum conductor, PVC insulated, galvanized steel wire armored and PVC or PE sheath cables
CABLE CONSTRUCTION 0.6/1KV AL/PVC/SWA/PVC or PE
| Cable size | Conductor type | Nominal thickness of PVC insulation (mm) |
Approx. diameter of steel wire(mm) |
Nominal thickness of PVC sheath(mm) |
Approx. cable overall diameter (mm) |
Max. D.C resistance @ 200C (Ω/km) |
| 5×1.5mm2 | RE or RM | 0.8 | 1.25 | 1.8 | 16.7 | 18.1 |
| 5×2.5mm2 | RE or RM | 0.8 | 1.25 | 1.8 | 17.8 | 12.1 |
| 5x4mm2 | RE or RM | 1.0 | 1.25 | 1.8 | 20.2 | 7.41 |
| 5x6mm2 | RE or RM | 1.0 | 1.6 | 1.8 | 22.2 | 4.61 |
| 5x10mm2 | RM | 1.0 | 1.6 | 1.8 | 25.7 | 3.08 |
| 5x16mm2 | RM | 1.0 | 1.6 | 1.9 | 28.8 | 1.91 |
| 5x25mm2 | SM | 1.2 | 1.6 | 1.9 | 29.6 | 1.20 |
| 5x35mm2 | SM | 1.2 | 2.0 | 2.0 | 33.6 | 0.868 |
| 5x50mm2 | SM | 1.4 | 2.0 | 2.2 | 38.6 | 0.641 |
| 5x70mm2 | SM | 1.4 | 2.0 | 2.3 | 43.1 | 0.443 |
| 5x95mm2 | SM | 1.6 | 2.5 | 2.6 | 50.1 | 0.320 |
| 5x120mm2 | SM | 1.6 | 2.5 | 2.7 | 54.1 | 0.253 |
| 5x150mm2 | SM | 1.8 | 2.5 | 2.9 | 59.4 | 0.206 |
| 5x185mm2 | SM | 2.0 | 2.5 | 3.1 | 64.9 | 0.164 |
| 5x240mm2 | SM | 2.2 | 3.15 | 3.3 | 73.6 | 0.125 |
| 5x300mm2 | SM | 2.4 | 3.15 | 3.6 | 80.7 | 0.100 |
Note: RE= round conductor RM = stranded conductor SM=sectional conductor
- Next: Aluminum Conductor Steel Supported Acss Bare Conductor
- Previous: Bare Conductors Type AAC Wire and AAC Conductor
