Swa XLPE Insulated Swa Armour Electric Cable, Power Cable

Product Name:

Model NO.:

YJV/YJV22/YJV32

Certification:

ISO, CE, VDE, 1

Wire Core Material:

Bare Copper Wire

Material Shape:

Round Wire

Sheath Material:

PVC

Insulation Material:

XLPE

Current:

DC Cable

Voltage:

Low and Medium Voltage Cable

Application:

Construction, Underground, Industrial, Power Station

Packing Details:

Wooden and Steel Drums

Trademark:

Jiapu

Transport Package:

Wooden drum, Iron wooden drum, Iron drum

Specification:

any one

Origin:

Henan China

HS Code:

8544492100

Product Description

SWA XLPE Insulated Swa Armour electric cable, Power Cable

Copper/XLPE/SWA/PVC This series is mainly for laying indoor, tunnel, channel and under ground, shaft with large differences of level and other conditions.Rated voltage 10-220kV XLPE insulated power cables have been widely used in our country with the advantages of excellent electric properties, high long term working temperature, strong ability to resist short circuit, long service life, light weight and without the limit of fall, easy to install, operate and maintain.

The XLPE insulated cables of our factory are strictly produced according to the standards of GB/T12706 (power cable with extruded insulation and their accessories for rated voltages from 1kV up to 35kV) and GB/T11017 (power cable with cross-linked polyethylene insulation and their accessories for rated voltage of 110kV).

The GB/T12706 is equal to IEC 60502 (1-30kV plastic insulated power cable) and GB/T 11017 is equal to IEC 60840 (the test of 30kV -150kV extruding insulated power cables).We can produce products complying with IEC 60502-0997 (rated voltage 1-30kV extruding insulated power cable and accessories) to meet the requirement of our clients.We can produce XLPE power cables with special requirement and higher properties according to clients’ requirements.

Characteristics:

1) The highest rated temperature is 90 C

2) The highest temperature of the conductor of cables shall be less than 250 C(max.Duration:5s)

3) The cables can be laid without the limit of fall with enough mechanical pull, But the single core cable cannot be laid in iron tube or cannot be fixed by circled iron tools around the cables

4) The laying temperature of cables should not be lower than 0 C, When the ambient temperature is below 0 C, the cables should be heated up to 0 C
Remarks: Including products for flame retardant, fire resistant and termite-proof
Packing: Export wooden drums

1)3.6/6(7.2)kV,3.6/6.6(7.2)kV,Three Cores,Al or Cu/XLPE/CTS/STA/PVC Armoured Power Cable
No.X Nominal Cross Section of Conductor	Nominal Diameter of Conductor	Nominal Thickness of Insulation	Nominal Thickness of Copper Tape Screen	Nominal Thickness of Inner Sheath	Nominal Thickness of Steel Tape Armouring	Nominal Thickness of PVC Sheath	Approx. Overall Diameter	Approx. Weight
No.X Nominal Cross Section of Conductor	Nominal Diameter of Conductor	Nominal Thickness of Insulation	Nominal Thickness of Copper Tape Screen	Nominal Thickness of Inner Sheath	Nominal Thickness of Steel Tape Armouring	Nominal Thickness of PVC Sheath	Approx. Overall Diameter	Al Conductor	Cu Conductor
No. X mm 2	mm	mm	mm	mm	mm	mm	mm	kg/m	kg/m
3 X 25	6	2.5	0.1	1.2	0.2	1.9	37.9	1.87	2.32
3 X 35	6.9	2.5	0.1	1.3	0.5	2	41.5	2.1	2.73
3 X50	8.2	2.5	0.1	1.3	0.5	2	44.3	2.37	3.22
3 X 70	9.7	2.5	0.1	1.4	0.5	2.1	47.9	2.77	4
3 X 95	11.3	2.5	0.1	1.4	0.5	2.2	51.6	3.21	4.91
3 X 120	12.8	2.5	0.1	1.5	0.5	2.4	55.4	3.69	5.84
3 X 150	14.2	2.5	0.1	1.5	0.5	2.5	58.6	4.15	6.85
3 X 185	15.9	2.5	0.1	1.5	0.5	2.6	62.5	4.73	8.11
3 X 240	18.3	2.6	0.1	1.6	0.5	2.7	68.5	5.62	10.05
3 X 300	20.4	2.8	0.1	1.7	0.5	2.9	74.5	6.55	12.11
3 X 400	23.2	3	0.1	1.9	0.8	3.2	83.6	8.78	15.86
3 X 500	26.4	3.2	0.1	2.1	0.8	3.4	93	10.52	18.85
2)6/10(12)kV,6.35/11(12)kV,,Three Cores,Al or Cu/XLPE/CTS/STA/PVC Armoured Power Cable
No.X Nominal Cross Section of Conductor	Nominal Diameter of Conductor	Nominal Thickness of Insulation	Nominal Thickness of Copper Tape Screen	Nominal Thickness of Inner Sheath	Nominal Thickness of Steel Tape Armouring	Nominal Thickness of PVC Sheath	Approx. Overall Diameter	Approx. Weight
No.X Nominal Cross Section of Conductor	Nominal Diameter of Conductor	Nominal Thickness of Insulation	Nominal Thickness of Copper Tape Screen	Nominal Thickness of Inner Sheath	Nominal Thickness of Steel Tape Armouring	Nominal Thickness of PVC Sheath	Approx. Overall Diameter	Al Conductor	Cu Conductor
No. X mm 2	mm	mm	mm	mm	mm	mm	mm	kg/m	kg/m
3 X 25	6	3.4	0.1	1.3	0.5	2	43.4	2.16	2.61
3 X 35	6.9	3.4	0.1	1.3	0.5	2	45.4	2.36	2.99
3 X50	8.2	3.4	0.1	1.4	0.5	2.2	48.8	2.69	3.54
3 X 70	9.7	3.4	0.1	1.5	0.5	2.3	52.4	3.1	4.33
3 X 95	11.3	3.4	0.1	1.5	0.5	2.4	56.1	3.56	5.26
3 X 120	12.8	3.4	0.1	1.5	0.5	2.5	59.5	4.04	6.19
3 X 150	14.2	3.4	0.1	1.5	0.5	2.6	62.7	4.49	7.19
3 X 185	15.9	3.4	0.1	1.6	0.5	2.6	66.6	5.12	8.49
3 X 240	18.3	3.4	0.1	1.7	0.5	2.8	72.4	5.99	10.42
3 X 300	20.4	3.4	0.1	1.8	0.5	3	77.5	6.86	12.42
3 X 400	23.2	3.4	0.1	1.9	0.8	3.2	85.4	8.97	16.05
3 X 500	26.4	3.4	0.1	2	0.8	3.4	93.7	10.65	19.5
3)8.7/10(15)kV,Three Cores,Al or Cu/XLPE/CTS/STA/PVC Armoured Power Cable
No.X Nominal Cross Section of Conductor	Nominal Diameter of Conductor	Nominal Thickness of Insulation	Nominal Thickness of Copper Tape Screen	Nominal Thickness of Inner Sheath	Nominal Thickness of Steel Tape Armouring	Nominal Thickness of PVC Sheath	Approx. Overall Diameter	Approx. Weight
No.X Nominal Cross Section of Conductor	Nominal Diameter of Conductor	Nominal Thickness of Insulation	Nominal Thickness of Copper Tape Screen	Nominal Thickness of Inner Sheath	Nominal Thickness of Steel Tape Armouring	Nominal Thickness of PVC Sheath	Approx. Overall Diameter	Al Conductor	Cu Conductor
No. X mm 2	mm	mm	mm	mm	mm	mm	mm	kg/m	kg/m
3 X 25	6	4.5	0.1	1.4	0.5	2.1	48.6	2.53	2.98
3 X 35	6.9	4.5	0.1	1.4	0.5	2.2	50.7	2.76	3.39
3 X50	8.2	4.5	0.1	1.5	0.5	2.3	53.9	3.1	3.95
3 X 70	9.7	4.5	0.1	1.5	0.5	2.4	57.4	3.51	4.74
3 X 95	11.3	4.5	0.1	1.5	0.5	2.6	61.2	4.05	5.75
3 X 120	12.8	4.5	0.1	1.6	0.5	2.6	64.7	4.56	6.72
3 X 150	14.2	4.5	0.1	1.6	0.5	2.7	67.9	5.04	7.74
3 X 185	15.9	4.5	0.1	1.7	0.5	2.8	71.9	5.66	9.04
3 X 240	18.3	4.5	0.1	1.8	0.5	3	77.7	6.56	11
3 X 300	20.4	4.5	0.1	1.9	0.8	3.2	84.1	8.39	13.96
3 X 400	23.2	4.5	0.1	2	0.8	3.3	90.5	9.71	16.79
3 X 500	26.4	4.5	0.1	2.1	0.8	3.5	98.8	11.45	20.57
4)12/20(24)kV, 12.7/22(24)kV,Three Cores,Al or Cu/XLPE/CTS/STA/PVC Armoured Power Cable
No.X Nominal Cross Section of Conductor	Nominal Diameter of Conductor	Nominal Thickness of Insulation	Nominal Thickness of Copper Tape Screen	Nominal Thickness of Inner Sheath	Nominal Thickness of Steel Tape Armouring	Nominal Thickness of PVC Sheath	Approx. Overall Diameter	Approx. Weight
No.X Nominal Cross Section of Conductor	Nominal Diameter of Conductor	Nominal Thickness of Insulation	Nominal Thickness of Copper Tape Screen	Nominal Thickness of Inner Sheath	Nominal Thickness of Steel Tape Armouring	Nominal Thickness of PVC Sheath	Approx. Overall Diameter	Al Conductor	Cu Conductor
No. X mm 2	mm	mm	mm	mm	mm	mm	mm	kg/m	kg/m
3 X 25
3 X 35	6.9	5.5	0.1	1.5	0.5	2.4	55.6	3.14	3.77
3 X50	8.2	5.5	0.1	1.5	0.5	2.5	58.6	3.49	4.34
3 X 70	9.7	5.5	0.1	1.5	0.5	2.6	62.1	3.93	5.16
3 X 95	11.3	5.5	0.1	1.6	0.5	2.6	65.7	4.46	6.16
3 X 120	12.8	5.5	0.1	1.7	0.5	2.7	69.4	5	7.15
3 X 150	14.2	5.5	0.1	1.7	0.5	2.8	72.6	5.49	8.19
3 X 185	15.9	5.5	0.1	1.8	0.5	3	76.9	6.16	9.53
3 X 240	18.3	5.5	0.1	1.9	0.8	3.2	83.9	7.87	12.31
3 X 300	20.4	5.5	0.1	2	0.8	3.2	88.6	8.96	14.52
3 X 400	23.2	5.5	0.1	2.1	0.8	3.5	95.4	10.35	17.43
3 X 500	26.4	5.5	0.1	2.2	0.8	3.7	103.7	12.45	20.23
5)18/30(36)kV,19/33(36)kV,Three Cores,Al or Cu/XLPE/CTS/STA/PVC Armoured Power Cable
No.X Nominal Cross Section of Conductor	Nominal Diameter of Conductor	Nominal Thickness of Insulation	Nominal Thickness of Copper Tape Screen	Nominal Thickness of Inner Sheath	Nominal Thickness of Steel Tape Armouring	Nominal Thickness of PVC Sheath	Approx. Overall Diameter	Approx. Weight
No.X Nominal Cross Section of Conductor	Nominal Diameter of Conductor	Nominal Thickness of Insulation	Nominal Thickness of Copper Tape Screen	Nominal Thickness of Inner Sheath	Nominal Thickness of Steel Tape Armouring	Nominal Thickness of PVC Sheath	Approx. Overall Diameter	Al Conductor	Cu Conductor
No. X mm 2	mm	mm	mm	mm	mm	mm	mm	kg/m	kg/m
3 X 25
3 X 35
3 X50	8.2	8	0.1	1.7	0.5	2.8	70.4	4.56	5.41
3 X 70	9.7	8	0.1	1.7	0.5	2.9	73.9	5.04	6.26
3 X 95	11.3	8	0.1	1.8	0.5	3	77.7	5.62	7.32
3 X 120	12.8	8	0.1	1.9	0.8	3.2	82.8	6.99	9.15
3 X 150	14.2	8	0.1	1.9	0.8	3.2	85.8	7.56	10.26
3 X 185	15.9	8	0.1	2	0.8	3.3	89.9	8.3	11.67
3 X 240	18.3	8	0.1	2.1	0.8	3.5	95.7	9.36	13.79
3 X 300	20.4	8	0.1	2.2	0.8	3.6	100.6	10.51	16.07
3 X 400	23.2	8	0.1	2.3	0.8	3.8	107.2	11.99	19.07
3 X 500	26.4	8	0.1	2.4	0.8	4	120.1	14.15	23.85

Workshop

Shipment

QA&QC

CUSTOMER VISIT

FAQ

1. How many years has Henan Jiapu Cable Group been in production?

Founded in October 1998 by Mr. Gu, our facility has three separate manufacturing workshops within its 100,000-sq.-ft. building. In 2012, we operates in a new 666,000 sq. foot state-of-the-art facility in Xiaodian Industry Park.,Xinxiang, Henan ,China

2. What kinds of products does Jiapu Cable manufacture?

1)Bare Conductor ,such as AAC,AAAC,ACSR,ACAR,AACSR,ACSR/AW and so on;

2)Aerial Bundled Cable (1kV-35kV ),such as Duplex,Triplex,Quadruplex Drop Wires and so on;

3)PVC Insulated (Flexible ) Wire ;

4) PVC Insulated and Sheathed (Armoured) Power Cable;

5)Low, Medium, High Voltage (1kV-220kV) XLPE Insulated (Armoured) Power Cable;

6)Welding Cable, Control Cable, Concentric Cable, Rubber Sheathed Cable and so on;

3. What kind of certifications do you have?

SABS, CE, ISO9001-2000, SGS

4.Which markets do you involve mainly in?

Our products have been exported mainly to Africa, Middle East, South-east Asia, South America,Central America,North America, Europe ,Australia, etc.

5. Which standards do you comply with when you produce the electrical wires and cables ?

We are able to produce electrical wires and cables based on GB, JB, IEC, BS, DIN, ASTM, JIS, NF, AS/NZS, CSA, etc. Meanwhile, we can design and manufacture the cables according to the samples and technical specification the customer supply.

6. What is the min.order quantity ?

It depends on the type and size of electrical wires and cables. For some small electrical wires, 100 meters can be accepted .But for the power cables with medium or high voltage, that should comply with the property of installed equipments. Anyhow,we will try our best to solve the problem and meet with the requirement If you have special request.

7. What is the production capacity per week or per month ?

For the bare conductor, we can finish 3000 tons within one month. For power cables, that depends on the type and size. The total output value per month is approx. USD3,000,000.00 for insulated aluminum cables and that is approx. USD8,000,000.00 for insulated copper cables.

8. Do you supply the customers with installation service in foreign country ?We don’t have professional installation teams in foreign country.But if that is necessary, we will recommend our partners to cooperate with you.