Free Samples, Aeic CS 8/Icea S-94-649, Cu/Tr-XLPE/Neutral/PVC Medium Underground Cable, 1/C, 28kv
Product Description
APPLICATIONS
• Predominantly used for primary underground distribution
• Suitable for use in wet or dry locations, direct burial, underground duct, and where exposed to sunlight
• To be used at 35,000 volts or less and at conductor temperatures not to exceed 90°C for normal operation
SPECIFICATIONS
35kV Primary UD Cable meets or exceeds the following ASTM specifications:
• B 230: Aluminum 1350-H19 Wire for Electrical Purposes
• B 231: Aluminum 1350 Conductors, Concentric-Lay-Stranded
• B 609: Aluminum 1350 Round Wire, Annealed and Intermediate Tempers, for Electrical Purposes
CONSTRUCTION
• The phase conductor is concentrically stranded, compressed soft copper or 1350-H16/26 aluminum alloy
• Cable is composed of the conductor with moisture block in the strands, covered by a semi-conducting cross-linked polyethylene strand shield, a tree-retardant cross-linked polyethylene primary insulation, and a semi-conducting cross-linked polyethylene insulation shield
• Conductors are available with either 100% or 133% insulation levels
• Concentric neutral of bare copper wires and an insulating polyethylene jacket is applied over the insulation shield
• Cable identified by surface print on the jacket and with the lightning bolt symbol for supply cables indented in the jacket
1.Aluminum conductor
2.XLPE insulation
3.PE jacket
STANDARD
• ANSI/ICEA S-94-649
• AEIC CS-8
• RUS U-1
PARAMETER
- Next: Caai 0, 6/1 Kv 3X25+2X16+Na25 mm2
- Previous: Power Cable with SABS 1507 Certificate Steel Wire Armored