Copper Core XLPE / Swa / PVC Power Cable

Product Name:

Model NO.:

YJV/YJV22/YJV32

Application:

Construction, Underground, Power Station

Voltage:

Low and Medium Voltage Cable

Insulation Material:

XLPE

Certification:

ISO, CE

Certification:

SABS

Brand:

Henan Jiapu

Voltage Rating:

0.6/1 Kv 3.6/6 Kv

No.of Cores:

1-5 Cores

Applicable Standard:

IEC60502 IEC60331 DIN BS

Max Working Temp:

90 Degrees

Trademark:

Jiapu

Transport Package:

Wooden drum, Iron wooden drum, Iron drum or as yo

Specification:

IEC, ASTM, DIN, BS, GB, Any standard

Origin:

Henan China

HS Code:

4101962331

Product Description

Copper Core XLPE / SWA / PVC Power Cable

Copper/XLPE/SWA/PVC This series is mainly for laying indoor, tunnel, channel and under ground, shaft with large differences of level and other conditions. Rated voltage 10-220kV XLPE insulated power cables have been widely used in our country with the advantages of excellent electric properties, high long term working temperature, strong ability to resist short circuit, long service life, light weight and without the limit of fall, easy to install, operate and maintain.

The XLPE insulated cables of our factory are strictly produced according to the standards of GB/T12706 (power cable with extruded insulation and their accessories for rated voltages from 1kV up to 35kV) and GB/T11017 (power cable with cross-linked polyethylene insulation and their accessories for rated voltage of 110kV).

The cables can be laid without the limit of fall with enough mechanical pull, But the single core cable cannot be laid in iron tube or cannot be fixed by circled iron tools around the cables

The laying temperature of cables should not be lower than 0 C, When the ambient temperature is below 0 C, the cables should be heated up to 0 C
Or higher with certain methods. This series includes:
* XLPE insulated, PVC or PE sheathed power cables
* XLPE insulated, steel tape armored, PVC or PE sheathed power cables
* XLPE insulated, steel wire armored, PVC or PE sheathed power cables
* Rated voltage: 0.6/1kV, 1.8/3kV, 3.6/6kV, 6/10kV, 8.7/15kV, 12/20kV, 18/20kV, 21/35kV, 26/35kV
* Number of cores: One, two, three, four, five* Relative manufacturing standards: IEC60502, BS5467, BS6622, ASTM

Specification:
IEC60502,designing and manufacturing special power cable according to the other standards required by the customers.

1)3.6/6(7.2)kV,3.6/6.6(7.2)kV,Three Cores,Al or Cu/XLPE/CTS/STA/PVC Armoured Power Cable

No.X Nominal Cross Section of Conductor	Nominal Diameter of Conductor	Nominal Thickness of Insulation	Nominal Thickness of Copper Tape Screen	Nominal Thickness of Inner Sheath	Nominal Thickness of Steel Tape Armouring	Nominal Thickness of PVC Sheath	Approx. Overall Diameter	Approx. Weight
No.X Nominal Cross Section of Conductor	Nominal Diameter of Conductor	Nominal Thickness of Insulation	Nominal Thickness of Copper Tape Screen	Nominal Thickness of Inner Sheath	Nominal Thickness of Steel Tape Armouring	Nominal Thickness of PVC Sheath	Approx. Overall Diameter	Al Conductor	Cu Conductor
No. X mm2	mm	mm	mm	mm	mm	mm	mm	kg/m	kg/m
3 X 25	6.0	2.5	0.1	1.2	0.2	1.9	37.9	1.87	2.32
3 X 35	6.9	2.5	0.1	1.3	0.5	2.0	41.5	2.10	2.73
3 X50	8.2	2.5	0.1	1.3	0.5	2.0	44.3	2.37	3.22
3 X 70	9.7	2.5	0.1	1.4	0.5	2.1	47.9	2.77	4.00
3 X 95	11.3	2.5	0.1	1.4	0.5	2.2	51.6	3.21	4.91
3 X 120	12.8	2.5	0.1	1.5	0.5	2.4	55.4	3.69	5.84
3 X 150	14.2	2.5	0.1	1.5	0.5	2.5	58.6	4.15	6.85
3 X 185	15.9	2.5	0.1	1.5	0.5	2.6	62.5	4.73	8.11
3 X 240	18.3	2.6	0.1	1.6	0.5	2.7	68.5	5.62	10.05
3 X 300	20.4	2.8	0.1	1.7	0.5	2.9	74.5	6.55	12.11
3 X 400	23.2	3.0	0.1	1.9	0.8	3.2	83.6	8.78	15.86
3 X 500	26.4	3.2	0.1	2.1	0.8	3.4	93.0	10.52	18.85

2)6/10(12)kV,6.35/11(12)kV,,Three Cores,Al or Cu/XLPE/CTS/STA/PVC Armoured Power Cable

No.X Nominal Cross Section of Conductor	Nominal Diameter of Conductor	Nominal Thickness of Insulation	Nominal Thickness of Copper Tape Screen	Nominal Thickness of Inner Sheath	Nominal Thickness of Steel Tape Armouring	Nominal Thickness of PVC Sheath	Approx. Overall Diameter	Approx. Weight
No.X Nominal Cross Section of Conductor	Nominal Diameter of Conductor	Nominal Thickness of Insulation	Nominal Thickness of Copper Tape Screen	Nominal Thickness of Inner Sheath	Nominal Thickness of Steel Tape Armouring	Nominal Thickness of PVC Sheath	Approx. Overall Diameter	Al Conductor	Cu Conductor
No. X mm2	mm	mm	mm	mm	mm	mm	mm	kg/m	kg/m
3 X 25	6.0	3.4	0.1	1.3	0.5	2.0	43.4	2.16	2.61
3 X 35	6.9	3.4	0.1	1.3	0.5	2.0	45.4	2.36	2.99
3 X50	8.2	3.4	0.1	1.4	0.5	2.2	48.8	2.69	3.54
3 X 70	9.7	3.4	0.1	1.5	0.5	2.3	52.4	3.10	4.33
3 X 95	11.3	3.4	0.1	1.5	0.5	2.4	56.1	3.56	5.26
3 X 120	12.8	3.4	0.1	1.5	0.5	2.5	59.5	4.04	6.19
3 X 150	14.2	3.4	0.1	1.5	0.5	2.6	62.7	4.49	7.19
3 X 185	15.9	3.4	0.1	1.6	0.5	2.6	66.6	5.12	8.49
3 X 240	18.3	3.4	0.1	1.7	0.5	2.8	72.4	5.99	10.42
3 X 300	20.4	3.4	0.1	1.8	0.5	3.0	77.5	6.86	12.42
3 X 400	23.2	3.4	0.1	1.9	0.8	3.2	85.4	8.97	16.05
3 X 500	26.4	3.4	0.1	2.0	0.8	3.4	93.7	10.65	19.50

3)8.7/10(15)kV,Three Cores,Al or Cu/XLPE/CTS/STA/PVC Armoured Power Cable

No.X Nominal Cross Section of Conductor	Nominal Diameter of Conductor	Nominal Thickness of Insulation	Nominal Thickness of Copper Tape Screen	Nominal Thickness of Inner Sheath	Nominal Thickness of Steel Tape Armouring	Nominal Thickness of PVC Sheath	Approx. Overall Diameter	Approx. Weight
No.X Nominal Cross Section of Conductor	Nominal Diameter of Conductor	Nominal Thickness of Insulation	Nominal Thickness of Copper Tape Screen	Nominal Thickness of Inner Sheath	Nominal Thickness of Steel Tape Armouring	Nominal Thickness of PVC Sheath	Approx. Overall Diameter	Al Conductor	Cu Conductor
No. X mm2	mm	mm	mm	mm	mm	mm	mm	kg/m	kg/m
3 X 25	6.0	4.5	0.1	1.4	0.5	2.1	48.6	2.53	2.98
3 X 35	6.9	4.5	0.1	1.4	0.5	2.2	50.7	2.76	3.39
3 X50	8.2	4.5	0.1	1.5	0.5	2.3	53.9	3.10	3.95
3 X 70	9.7	4.5	0.1	1.5	0.5	2.4	57.4	3.51	4.74
3 X 95	11.3	4.5	0.1	1.5	0.5	2.6	61.2	4.05	5.75
3 X 120	12.8	4.5	0.1	1.6	0.5	2.6	64.7	4.56	6.72
3 X 150	14.2	4.5	0.1	1.6	0.5	2.7	67.9	5.04	7.74
3 X 185	15.9	4.5	0.1	1.7	0.5	2.8	71.9	5.66	9.04
3 X 240	18.3	4.5	0.1	1.8	0.5	3.0	77.7	6.56	11.00
3 X 300	20.4	4.5	0.1	1.9	0.8	3.2	84.1	8.39	13.96
3 X 400	23.2	4.5	0.1	2.0	0.8	3.3	90.5	9.71	16.79
3 X 500	26.4	4.5	0.1	2.1	0.8	3.5	98.8	11.45	20.57

4)12/20(24)kV, 12.7/22(24)kV,Three Cores,Al or Cu/XLPE/CTS/STA/PVC Armoured Power Cable

No.X Nominal Cross Section of Conductor	Nominal Diameter of Conductor	Nominal Thickness of Insulation	Nominal Thickness of Copper Tape Screen	Nominal Thickness of Inner Sheath	Nominal Thickness of Steel Tape Armouring	Nominal Thickness of PVC Sheath	Approx. Overall Diameter	Approx. Weight
No.X Nominal Cross Section of Conductor	Nominal Diameter of Conductor	Nominal Thickness of Insulation	Nominal Thickness of Copper Tape Screen	Nominal Thickness of Inner Sheath	Nominal Thickness of Steel Tape Armouring	Nominal Thickness of PVC Sheath	Approx. Overall Diameter	Al Conductor	Cu Conductor
No. X mm2	mm	mm	mm	mm	mm	mm	mm	kg/m	kg/m
3 X 25
3 X 35	6.9	5.5	0.1	1.5	0.5	2.4	55.6	3.14	3.77
3 X50	8.2	5.5	0.1	1.5	0.5	2.5	58.6	3.49	4.34
3 X 70	9.7	5.5	0.1	1.5	0.5	2.6	62.1	3.93	5.16
3 X 95	11.3	5.5	0.1	1.6	0.5	2.6	65.7	4.46	6.16
3 X 120	12.8	5.5	0.1	1.7	0.5	2.7	69.4	5.00	7.15
3 X 150	14.2	5.5	0.1	1.7	0.5	2.8	72.6	5.49	8.19
3 X 185	15.9	5.5	0.1	1.8	0.5	3.0	76.9	6.16	9.53
3 X 240	18.3	5.5	0.1	1.9	0.8	3.2	83.9	7.87	12.31
3 X 300	20.4	5.5	0.1	2.0	0.8	3.2	88.6	8.96	14.52
3 X 400	23.2	5.5	0.1	2.1	0.8	3.5	95.4	10.35	17.43
3 X 500	26.4	5.5	0.1	2.2	0.8	3.7	103.7	12.45	20.23

5)18/30(36)kV,19/33(36)kV,Three Cores,Al or Cu/XLPE/CTS/STA/PVC Armoured Power Cable

No.X Nominal Cross Section of Conductor	Nominal Diameter of Conductor	Nominal Thickness of Insulation	Nominal Thickness of Copper Tape Screen	Nominal Thickness of Inner Sheath	Nominal Thickness of Steel Tape Armouring	Nominal Thickness of PVC Sheath	Approx. Overall Diameter	Approx. Weight
No.X Nominal Cross Section of Conductor	Nominal Diameter of Conductor	Nominal Thickness of Insulation	Nominal Thickness of Copper Tape Screen	Nominal Thickness of Inner Sheath	Nominal Thickness of Steel Tape Armouring	Nominal Thickness of PVC Sheath	Approx. Overall Diameter	Al Conductor	Cu Conductor
No. X mm2	mm	mm	mm	mm	mm	mm	mm	kg/m	kg/m
3 X 25
3 X 35
3 X50	8.2	8.0	0.1	1.7	0.5	2.8	70.4	4.56	5.41
3 X 70	9.7	8.0	0.1	1.7	0.5	2.9	73.9	5.04	6.26
3 X 95	11.3	8.0	0.1	1.8	0.5	3.0	77.7	5.62	7.32
3 X 120	12.8	8.0	0.1	1.9	0.8	3.2	82.8	6.99	9.15
3 X 150	14.2	8.0	0.1	1.9	0.8	3.2	85.8	7.56	10.26
3 X 185	15.9	8.0	0.1	2.0	0.8	3.3	89.9	8.30	11.67
3 X 240	18.3	8.0	0.1	2.1	0.8	3.5	95.7	9.36	13.79
3 X 300	20.4	8.0	0.1	2.2	0.8	3.6	100.6	10.51	16.07
3 X 400	23.2	8.0	0.1	2.3	0.8	3.8	107.2	11.99	19.07
3 X 500	26.4	8.0	0.1	2.4	0.8	4.0	120.1	14.15	23.85