Copper Cable Lug

Mod. T Copper cable lug
Functionality Copper cable lug for connections of LOW and MEDIUM VOLTAGE circuits. They are used in a wide range of sections, both for flexible and rigid copper cables in underground distribution networks.

These terminals must be crimped by HEXAGONAL COMPRESSION or by PUNCHING COMPRESSION.

Product Features

Manufactured from ELECTROLYTIC COPPER with a tinplated finish to improve electrical contact. Incorporates a central stop which facilitates the correct cable positioning.

These copper cable lugs are suitable for indoor and outdoor installations as long as any possible water inlet is sealed by tape or heat shrink, as could be the inspection hole and / or the remaining separation between terminal and cable once crimped.

Raw Material Features

COPPER Copper type: 99.9% electrolytic copper.
Specific gravity: 8.95 gr/cm³.
Conductivity at 20°C: 58.14 Siemens x m/mm².
Resistivity at 20°C: 0.0172 Ohms x mm²/m.
Surface treatment: tin bath 5μ thick.

Electrical Features CLASS A cable lug: Connectors intended for the distribution of electricity or industrial networks, where they may be subjected to short circuits of relatively high intensity and duration. As a result, they adapt to most applications.