Aluminium Alloy Conductor Steel Reinforced Aacsr (JLHA2)
Application:
The AACSR conductors are also suitable for use in all practical transmission towers,and other structures. Application range from extra high voltage(EHV) transmission lines to sub-service spans at distribution or utilization voltages on private premises as like as ACSR.
AACSR(Aluminum Alloy Conductor Steel Reinforced) has also a long service record because of its economy ,dependability, and strength to weight ratio. The combined light weight and high conductivity of aluminum with strength of the steel cores enable higher tensions ,less sag,and longer spans than any alternative as like as ACSR.
Compared with ACSR ,the tensile strength of aluminum conductor is more strong .
Refered Standards
All Aluminum Alloy Conductor Steel Reinforced meets or exceeds the following standards:IEC61089,BS3242, DIN48201, ASTM B399, BS EN50183, GB/T 1179-2008
Construction
Aluminum Alloy 6201 wires and the steel cores are concentrically stranded and wrapped helically around a central wire. The additional corrosion protection is available through the application of grease to the cores or infusion of the complete cable with grease.
Bare Conductor Types
(1) all aluminum conductor (AAC)
(2) all aluminum alloy conductor(AAAC)
(3) aluminum conductor steel reinforced (ACSR)
(4) anti-corrosion type ACSR
(5) aluminum conductor aluminum clad steel reinforced(ACSR/AW)
(6) rear earth aluminum conductor steel reinforced(ACSR/RE)
(7) aluminum conductor aluminum alloy reinforced(ACAR)
(8) aluminum conductor steel supported (ACSS)
(9) aluminum conductor carbon core(ACCC)
(10) aluminium alloy conductor steel reinforced (AACSR)
Specification
Area:from 10mm2 to 1500mm2 The detailed speicification is as follows.
Alumininum Alloy Conductors Steel Reinforced AACSR Conductor IEC61089
Code Number |
Steel ratio |
Area | Number of wires |
Wire diam | Diameter | Linear mass |
Rated strength |
D.C. resistance |
|||||
Alum, | Steel | Total | Al | St. | Alum. | Steel | Core | Cond. | |||||
% | mm2 | mm2 | mm2 | mm | mm | mm | mm | kg/km | kN | Ohm/km | |||
16 | 17 | 18.6 | 3.1 | 21.7 | 6 | 1 | 1.99 | 1.99 | 1.99 | 5.96 | 75.1 | 10.53 | 1.7934 |
25 | 17 | 29 | 4.84 | 23.9 | 6 | 1 | 2.48 | 2.48 | 2.48 | 7.45 | 117.3 | 16.27 | 1.1478 |
40 | 17 | 46.5 | 7.75 | 54.2 | 6 | 1 | 3.14 | 3.14 | 3.14 | 9.42 | 187.7 | 25.79 | 0.7174 |
63 | 17 | 73.2 | 12.2 | 85.4 | 6 | 1 | 3.94 | 3.94 | 3.94 | 11.8 | 295.6 | 39.41 | 0.4555 |
100 | 6 | 116 | 6.46 | 123 | 18 | 1 | 2.87 | 2.87 | 2.87 | 14.3 | 369.9 | 46.86 | 0.288 |
125 | 6 | 145 | 8.07 | 153 | 18 | 1 | 3.21 | 3.21 | 3.21 | 16.0 | 462.3 | 58.34 | 0.2304 |
125 | 16 | 145 | 23.7 | 169 | 26 | 7 | 2.67 | 2.07 | 6.22 | 16.9 | 585.4 | 81.50 | 0.18 |
160 | 6 | 186 | 10.3 | 196 | 18 | 1 | 3.63 | 3.63 | 3.63 | 18.1 | 591.8 | 72.40 | 0.1805 |
160 | 16 | 186 | 30.3 | 216 | 26 | 7 | 3.02 | 2.35 | 7.04 | 19.1 | 749.4 | 103.11 | 0.144 |
200 | 6 | 232 | 12.9 | 245 | 8 | 1 | 4.05 | 4.05 | 4.05 | 20.3 | 739.8 | 90.50 | 0.1444 |
200 | 16 | 232 | 37.8 | 270 | 26 | 7 | 3.37 | 2.62 | 7.87 | 21.4 | 936.7 | 128.89 | 0.1154 |
250 | 10 | 290 | 28.5 | 319 | 22 | 7 | 4.10 | 2.28 | 6.83 | 23.2 | 1023.2 | 131.72 | 0.1155 |
250 | 16 | 290 | 47.3 | 338 | 26 | 7 | 3.77 | 2.93 | 8.80 | 23.9 | 1170.9 | 158.21 | 0.0917 |
315 | 7 | 366 | 25.3 | 391 | 45 | 7 | 3.22 | 2.15 | 6.44 | 25.7 | 1207.9 | 155.64 | 0.0917 |
315 | 16 | 366 | 59.6 | 426 | 26 | 7 | 4.23 | 3.29 | 9.88 | 26.8 | 145.3 | 197.55 | 0.0722 |
400 | 7 | 465 | 32.1 | 497 | 45 | 7 | 3.63 | 2.42 | 7.25 | 29.0 | 1533.9 | 191.71 | 0.0723 |
400 | 13 | 465 | 60.2 | 525 | 54 | 7 | 3.31 | 3.31 | 9.93 | 29.8 | 1754.9 | 234.19 | 0.0642 |
450 | 7 | 523 | 36.1 | 559 | 45 | 7 | 3.8 5 | 2.56 | 7.69 | 30.8 | 1725.6 | 215.67 | 0.0643 |
450 | 13 | 523 | 67.8 | 591 | 54 | 7 | 3.51 | 3.51 | 10.50 | 31.6 | 1974.2 | 255.52 | 0.0578 |
500 | 7 | 581 | 40.2 | 621 | 45 | 7 | 4.05 | 2.70 | 8.11 | 32.4 | 1917.3 | 239.63 | 0.0578 |
500 | 13 | 581 | 75.3 | 656 | 54 | 7 | 3.70 | 3.70 | 11.10 | 33.3 | 2193.6 | 283.91 | 0.0516 |
560 | 7 | 651 | 45 | 696 | 45 | 7 | 4.29 | 2.86 | 8.58 | 34.3 | 2147.4 | 268.39 | 0.0516 |
560 | 13 | 651 | 82.4 | 733 | 54 | 19 | 3.92 | 2.35 | 11.80 | 35.3 | 2444.0 | 321.57 | 0.0459 |
630 | 4 | 732 | 31.6 | 764 | 72 | 7 | 3.60 | 2.40 | 7.20 | 36.0 | 2269.4 | 275.18 | 0.0459 |
630 | 13 | 732 | 92.7 | 825 | 54 | 19 | 4.15 | 2.49 | 12.50 | 37.4 | 2749.5 | 361.32 | 0.0407 |
710 | 4 | 825 | 35.6 | 861 | 72 | 7 | 3.82 | 2.55 | 7.64 | 38.2 | 2557.6 | 310.12 | 0.0407 |
710 | 13 | 825 | 104 | 929 | 54 | 19 | 4.41 | 2.65 | 13.20 | 39.7 | 3098.6 | 407.20 | 0.0361 |
800 | 4 | 930 | 40.2 | 970 | 72 | 7 | 4.05 | 2.70 | 8.11 | 40.5 | 2881.8 | 349.43 | 0.0362 |
800 | 8 | 930 | 77.5 | 1007 | 84 | 7 | 3.75 | 3.75 | 11.30 | 41.3 | 3175.1 | 396.60 | 0.0321 |
900 | 4 | 1046 | 45.2 | 1091 | 72 | 7 | 4.30 | 2.87 | 8.60 | 43.0 | 3242.0 | 393.11 | 0.0322 |
900 | 8 | 1046 | 87.1 | 1133 | 84 | 7 | 3.98 | 3.98 | 11.90 | 43.8 | 3572.0 | 446.17 | 0.0289 |
1000 | 8 | 1162 | 94.6 | 1257 | 84 | 19 | 4.20 | 2.52 | 12.60 | 46.2 | 3954.1 | 499.40 | 0.0289 |
1120 | 8 | 1301 | 106 | 1407 | 84 | 19 | 4.44 | 2.66 | 13.30 | 48.9 | 4428.6 | 559.33 | 0.0258 |
Alumininum Alloy Conductors Steel Reinforced AACSR Conductor ASTM B711
Nominal | Alloy Cross Section | Steel Cross Section | Number | Diameter | Number | Diameter | Overall | Linear | Rated | Max.D.C. Resistance |
Cross Section | of Alloy | of Alloy | of Steel | of Steel | Diameter | Mass | Tensile | at 20ºC | ||
Wires | Wires | Wires | Wires | Strength | ||||||
mm² | mm² | mm² | – | mm | – | mm | mm | kg/km | daN | Ω/km |
163 | 140 | 23 | 26 | 2.62 | 7 | 2.04 | 16.6 | 560 | 7500 | 0.24 |
173 | 140 | 33 | 30 | 2.44 | 7 | 2.44 | 17.1 | 650 | 8740 | 0.24 |
186 | 160 | 26 | 26 | 2.8 | 7 | 2.18 | 17.7 | 645 | 8560 | 0.21 |
198 | 160 | 38 | 30 | 2.61 | 7 | 2.61 | 18.3 | 740 | 10600 | 0.21 |
209 | 180 | 29 | 26 | 2.97 | 7 | 2.31 | 18.8 | 725 | 9510 | 0.187 |
222 | 180 | 42 | 30 | 2.76 | 7 | 2.76 | 19.3 | 825 | 11200 | 0.187 |
232 | 200 | 32 | 26 | 3.13 | 7 | 2.43 | 19.8 | 800 | 10600 | 0.168 |
247 | 200 | 47 | 30 | 2.91 | 7 | 2.91 | 20.4 | 920 | 12400 | 0.168 |
260 | 224 | 36 | 26 | 3.31 | 7 | 2.57 | 21 | 900 | 11800 | 0.15 |
276 | 224 | 52 | 30 | 3.08 | 7 | 3.08 | 21.6 | 1025 | 13900 | 0.15 |
291 | 250 | 41 | 26 | 3.5 | 7 | 2.72 | 22.2 | 1010 | 12900 | 0.135 |
308 | 250 | 58 | 30 | 3.26 | 7 | 3.26 | 22.8 | 1145 | 15600 | 0.135 |
326 | 280 | 46 | 26 | 3.7 | 7 | 2.88 | 23.4 | 1140 | 14400 | 0.12 |
345 | 280 | 65 | 30 | 3.45 | 7 | 3.45 | 24.2 | 1280 | 17100 | 0.12 |
367 | 315 | 52 | 26 | 3.93 | 7 | 3.06 | 24.9 | 1276 | 16300 | 0.107 |
387 | 315 | 72 | 30 | 3.66 | 19 | 2.2 | 25.6 | 1433 | 19000 | 0.107 |
413 | 355 | 58 | 26 | 4.17 | 7 | 3.24 | 26.4 | 1433 | 18300 | 0.095 |
436 | 355 | 81 | 30 | 3.88 | 19 | 2.33 | 27.2 | 1614 | 21100 | 0.095 |
465 | 400 | 65 | 26 | 4.43 | 7 | 3.45 | 28.1 | 1612 | 20700 | 0.0842 |
491 | 400 | 91 | 30 | 4.12 | 19 | 2.47 | 28.8 | 1816 | 23700 | 0.0842 |
509 | 450 | 59 | 54 | 3.26 | 19 | 1.98 | 29.5 | 1703 | 21500 | 0.0748 |
563 | 500 | 63 | 54 | 3.43 | 19 | 2.06 | 30.9 | 1873 | 22900 | 0.0673 |
631 | 560 | 71 | 54 | 3.63 | 19 | 2.18 | 32.7 | 2101 | 25700 | 0.0601 |
710 | 630 | 80 | 54 | 3.85 | 19 | 2.31 | 34.6 | 2365 | 28600 | 0.0534 |
800 | 710 | 90 | 54 | 4.09 | 19 | 2.45 | 36.8 | 2665 | 32200 | 0.0474 |
901 | 800 | 101 | 54 | 4.34 | 19 | 2.6 | 39 | 3000 | 36300 | 0.042 |
973 | 900 | 73 | 84 | 3.69 | 19 | 2.21 | 40.6 | 3062 | 35500 | 0.0374 |
1081 | 1000 | 81 | 84 | 3.89 | 19 | 2.33 | 42.8 | 3395 | 39100 | 0.0337 |
1211 | 1120 | 91 | 84 | 4.12 | 19 | 2.47 | 45.3 | 3803 | 43900 | 0.03 |
1352 | 1250 | 102 | 84 | 4.35 | 19 | 2.61 | 47.8 | 4250 | 49000 | 0.027 |
About Us
Packing & Delivery
Packing Details : Packing in wooden drum, iron-wooden drum or as customer’s requirement.
Delivery Details : 15-25 days after place an order.
Customers Visit
We have a professional sales team with each of them has engaged in this job for 3-10 years, so that we can provide the comprehensive and professional technology for you.
With the perfect quality and after sales service, till now we have exported to more than 80 countries, welcome to visit us and establish win-win business relationship!
Certification
As top rank of the cable supplier in China, we have obtained CCC, ISO9001, ISO14001, OHSAS certificates, passed the SGS and BV test, and our brand "RMJT" be given China famous brand.
FAQ
Q:I didn’t find the cable which I need in this page?
A:If you didn’t find the species of cables you need, please contact us directly, we will reply you quickly.
Q:What’s your minimum order quantity?
A:It is not so sure, you can confirm it with us. Normally, it will be 1000 meters.
Q:What’s your delivery time?
A:It depends on whether we just has the stock for your type.Normally,it takes about 7-15days to achieve production.
Q:How can I get a sample from your company? Is the sample free?
A:If you need the sample to check the quality, please contact us, we will send you the free sample, but the freight charge should be paid.
Q:What if the cable which we need have some differences on specifications from yours?
A: Any difference, we can design and produce according to your requests, which include cable, color, material, processing requirement etc.
Our Service:
1.26 years production experience and 13 years export experience .
2.Products certification :ISO,SGS,UL,CE,BV,TUV
3.OEM service available based on official & legal authorization.
4.Strict quality control system.
5.Rapid delivery and feedback,Faster lead time than our competitors.
6.Excellent quality with reasonable price.
7.Strong technical support (technical data, drawing, etc.)
8.Professional teamwork service for you actively.
9.Stock available, Free sample is available.
- Next: IEC Standard Aluminium Conductor Steel Reinforced ACSR Conductor
- Previous: Low Voltage Overhead Aluminium Conductor XLPE Insulation ABC Aerial Bundled Cable