Triplex Neutral-Supported Cable Type Ns75 600 V, Aluminum Conductor, LLDPE Insulation, ACSR Neutral, CSA Listed

The insulated conductors of NS75 Service Drop cables are resistant to weathering, sunlight, abrasion, tearing, cutting and chemicals. The cable is rated 600 V with a maximum conductor operating temperature of 75°C for polyethylene insulation.

Applications:

Duplex and Triplex NS75 Service Drop Cable is intended to deliver single phase power from the secondary overhead power line or pole-mounted transformer to the service entrance conductors at the user’s building or other structure.

Quadruplex NS75 Service Drop Cable is intended to deliver three phase power from the secondary overhead power line or pole-mounted transformers to the service entrance conductors at the user’s building or other structure.

NS75 cable may also be used as pole line secondary with service splices at the pole (also refer to CEC rule 12-318).

NS75 cable is rated for use on systems having nominal voltages of 600 V or less.

Options:

Reduced-size insulated conductor for use as a water heater control conductor

Colour-coded or ribbed PVC jackets which are used for phase identification and FT1-rated for flame retardancy

Alternate phase identification by the use of printed numbers on the black coloured insulation

Neutral conductor corrosion-resistant inhibitor treatment

Neutral supported cable is available with annealed copper conductors

Concentric stranded Class A, 6101-T81 aluminum alloy stranded neutral messenger conductor (A2)

Concentric stranded Class A, 6101-T81 aluminum alloy – high strength steel-reinforced stranded neutral messenger conductor (A2/S3A, AACSR)
CSA C68.8 for distribution utilities