PE Underground Secondary Cable Type Usei-75 600 V, Aluminum Conductor, LLDPE Insulation, PVC Jacket, CSA Listed
More product about CSA Usei-75 CableProduct Description
USEI-75 Underground Service Entrance Cable consists of two, three, or four compact aluminum conductors individually insulated with 75°C black PE insulation, jacketed with coloured PVC and twisted together. The neutral conductor will be white. The product meets the USEI-75 cable requirements of CSA C22.2 No. 52.
Conductors:
The aluminum stranded conductors are Class B compact 1350-H16 (3/4 hard) aluminum.
THREE CONDUCTOR TYPE USEI-75 – LLDPE/PVC – 600 VOLTS
Insulation:
The insulation is a black, Linear Low-Density Polyethylene (LLDPE) meeting the requirements of CSA C22.2 No. 52 for 75°C wet and dry rated polyethylene.
Jacket:
Over top of the insulation, a continuous layer of PVC is extruded. The jacket is a weather-and sunlight-resistant, non-sulphide-staining, cut-through-resistant, 75°C/-40°C FT1-rated material.
Neutral Conductor:
One of the insulated conductors is identified as a neutral conductor by the use of a white coloured PVC jacket. The neutral conductor may be the same size as the power conductor, or it may be reduced.
Phase Identification:
Phase identification is provided by means of jacket colour coding. Three conductor cable consists of a red and a black coloured power conductor and a white coloured neutral. Four conductor cable consists of a red, black, and blue coloured phase conductor and a white coloured neutral. All cables provided with sequential print marking.
Similar Or Related