Overhead Alloy Reinforced Acar Aluminum Conductor 950mcm
More product about Acar Aluminum ConductorProduct Description
ASTM B524: Standard Specification for Concentric-lay-stranded Aluminum Conductors, Aluminum Alloy Reinforced (ACAR, 1350/6201)
ASTM B230: Standard Specification for Aluminum 1350-H19 Wire for Electrical Purposes
ASTM B398: Standard Specification for Aluminum-Alloy 6201-T81 and 6201-T83 Wire for Electrical Purposes
Application
This overhead alloy reinforced acar aluminum conductor is used in high voltage overhead power transmission lines. Compared with ACSR conductor of the same diameter, AAAC has smaller linear mass and lower resistivity.
Product Details
1) Conductor: 1350 aluminum, 18/3.62mm
2) Conductivity: 61.2% IACS
3) Mechanical performance of aluminum wire
| Diameter | Min. Tensile Strength (MPa) | Min. Elongation in 250mm (%) | ||
| mm | Average for a lot | Individual test value | Average for a lot | Individual test value |
| 0.227 to 1.25 | 170.0 | 160.0 | … | … |
| 1.26 to 1.50 | 200.0 | 185.0 | 1.4 | 1.2 |
| 1.51 to 1.75 | 195.0 | 185.0 | 1.5 | 1.3 |
| 1.76 to 2.00 | 195.0 | 185.0 | 1.6 | 1.4 |
| 2.01 to 2.25 | 190.0 | 180.0 | 1.6 | 1.5 |
| 2.26 to 2.50 | 185.0 | 175.0 | 1.6 | 1.5 |
| 2.51 to 2.75 | 180.0 | 170.0 | 1.6 | 1.5 |
| 2.76 to 3.00 | 175.0 | 165.0 | 1.7 | 1.6 |
| 3.01 to 3.50 | 170.0 | 160.0 | 1.8 | 1.7 |
| 3.51 to 3.75 | 170.0 | 160.0 | 1.9 | 1.8 |
| 3.76 to 4.50 | 165.0 | 160.0 | 2.0 | 1.9 |
| 4.51 to 5.25 | 165.0 | 160.0 | 2.1 | 2.0 |
| 5.26 to 6.50 | 160.0 | 155.0 | 2.3 | 2.2 |
4) Reinforced core: 6201 aluminum alloy, 19/3.62mm
5) Alloy conductivity: 52.5% IACS
6) Alloy mechanical performance
| Diameter (mm) | Min Tensile Strength (MPa) | Elongation in 250mm | ||
| Over | Through | Average for a lot | Individual test | % |
| 3.25 | 4.75 | 315 | 305 | 3.0 |
| 1.50 | 3.25 | 330 | 315 | 3.0 |
7) Sectional area: 950MCM (481mm2)
8) Cable specification
| Sectional Area (MCM) |
Aluminum Wire (No./mm) |
Alloy Wire (No./mm) |
Overall Dia. (mm) |
Aprrox. Weight (kg/km) |
Min. Breaking Load (kN) |
Max. Resist. @ 20ºC (Ω/km) |
| 950 | 33/4.07 | 4/4.07 | 28.5 | 1330 | 79.5 | 0.061 |
| 950 | 30/4.07 | 7/4.07 | 28.5 | 1330 | 86.1 | 0.062 |
| 950 | 24/4.07 | 13/4.07 | 28.5 | 1330 | 95.0 | 0.063 |
| 950 | 18/4.07 | 19/4.07 | 28.5 | 1330 | 106.1 | 0.065 |
Packaging details
| Polyethylene film packaging 1) Usually used for cables with an overall diameter 10mm and below 2) 100 meters per roll or as per customer’s requirements 3) Packaging dimension: 50cm * 50cm * 20cm or below 4) Weight: 30 kg/roll or below |
Steel-wood drum packaging 1) Used for cables with a overall diameter of 10mm and above 2) Drum size: 180cm * 180cm *110cm (different sizes are available according to packaging length) 3) Standard length: as per customer’s requirements. |
Customer service
1) Select the right cable as per customer’s requirements
2) Design suitable packaging to guarantee safe and the most economic delivery
3) Provide installation and use guidance
4) Product quality guarantee under the normal use
Similar Or Related