Ec Grade Aluminium Wire Rod 9.5mm for Electrical Purpose
More product about Aluminum RodProduct Description
Brief introduction
The aluminium rod is used for electrical purposes, is the raw material for the overhead power transmission lines , for example : ACSR, AAC, AAAC, ACAR, ACS etc.
1.Standard
The aluminium rod is produce according to the Chinese standard GB/T3954-2001, and consulting and following the American standard ASTM B 233, Germany DIN, and EN 17152:1997 .
2.The Quanlity on surface
a. It should be neat and well-distributed on surface
b.The surface should be clean and not be flaw, wrong round, crackles, mess, kink and no other shortcoming for using, but it is permitted for slightly mechanical rub speck, pit, losing leather or fling border.
3.The Component of Material
| Name of Element | Si | Fe | Cu | V+Ti+Mn+Cr | Other | Al |
| Percentage% | 0.10 | 0.20 | 0.01 | 0.02 | 0.03 | ≥99.7 |
4.Specification
|
Temper |
Ksj |
Mpa |
|
1350-O |
8.5–14.0 |
59–97 |
|
1350-H12 and -H22 |
12.0–17.0 |
83–117 |
|
1350-H14 and -H24 |
15.0–20.0 |
103–138 |
|
1350-H16 and -H26 |
17.0–22.0 |
117–152 |
|
Temper |
Resistivity |
Equivalent Volume Conductivity |
|
1350-O |
0.027899 |
61.8 |
|
1350-H12 and -H22 |
0.028035 |
61.5 |
|
1350-H14 and -H24 |
0.028080 |
61.4 |
|
1350-H16 and -H26 |
0.028026 |
61.3 |
Similar Or Related