Cu/XLPE/Awa/PVC, 0.6/1 Kv, Aluminum Wire Armor 1/C Power Cable (IEC 60502-1)
Product Description
Application:
These cables are used for electricity supply in low voltage installation system, They are suitable for installation in indoors and outdoors, in cable ducts, under ground, in power and switching stations, local energy distributions, industrial plants, where there is no risk of mechanical damage.
Construction:
Conductors Copper or Aluminium conductor, round standed or Shaped, Class 2 to IEC 60228, BS
EN 60228. For smaller sizes, a solid round conductor, Class 1 as per IEC 60228, BS
EN 60228 can also be supplied upon request.
Insulation XLPE Insulation material and thickness shall be as per IEC 60502-1 and BS 6346.
PVC material shall be Type A as per IEC 60502-1 or TI1 as per BS EN 50363.
PVC Insulation material as per SASO 1694 rated for 85° C continuous operation is also available upon special request.
Colour Code Colour Code (1):
1 Core: Red or Black
2 Cores: Red, Black
3 Cores: Red, Yellow, Blue
4 Cores: Red, Yellow, Blue, Black
5 Cores: Red, Yellow, Blue, Black, Green
Above 5 Cores: Black Cores with White numerals
Colour Code (2):
1 Core: Brown or Blue
2 Cores: Brown or Blue
3 Cores: Brown, Black, Grey
4 Cores: Blue, Brown, Black, Grey
5 Cores: Green/Yellow, Blue, Brown, Black, Grey
Above 5 Cores: Black Cores with White numerals
Assembly / Two, Three or Four insulated conductors are laid-up together with non-hygroscopic Inner Sheath fillers and the assembly is bedded with an extruded layer of PVC. In case of non-
Armoured cables, this layer may be omitted
Armour Aluminum/Galvanized Steel Wires applied helically over the bedding as per IEC 60502 or as per BS 5467, BS 6346. Single core cables shall be Aluminium wire armour. Aluminum/Steel Tapes applied helically over the bedding of multi-core cables as per IEC 60502.
Outer Sheath Outer sheath shall be of Extruded PVC Type ST2 as per IEC 60502-1 or Type 9 as BS 6346/5467.
Special type of PVC sheathing material such as Fire Retardant PVC, Anti-Termite PVC, Anti-Rodent PVC, Sunlight resistant PVC, Oil Resistant PVC are available on special request. Also, special sheathing materials such as LLDPE, MDPE, HDPE, LSF, CPE are available on request.
Fire Performance of Cable Sheaths Cables can be supplied with special flame retardant PVC outer sheath to comply with the flame test requirements of IEC 60332-3-22, IEC 60332-3-23 and IEC 60332-3-24, can also supply cables with Low Smoke Halogen Free (LSHF) material according to IEC 60502-1, BS 7211, BS 6724 or other equivalent standards.
Section | Conductor Diameter | Insulation Thickness | Bedding Thickness | Armour Diameter | Sheath Thickness | Overall Diameter | Cable Weight | ||
No.xmm² | mm | mm | mm | mm | mm | mm | Kg/Km | ||
Single Core XLPE Insulated AWA Armoured Power Cable | |||||||||
1×50 | 8.8 | 1 | 1 | 1.25 | 1.8 | 19.5 | 730 | ||
1×70 | 10.6 | 1.1 | 1 | 1.25 | 1.8 | 21.5 | 970 | ||
1×95 | 12.4 | 1.1 | 1 | 1.6 | 1.8 | 24 | 1220 | ||
1×120 | 14 | 1.2 | 1 | 1.6 | 1.8 | 25.5 | 1520 | ||
1×150 | 15.5 | 1.4 | 1 | 1.6 | 1.8 | 27.5 | 1920 | ||
1×185 | 17.4 | 1.6 | 1 | 1.6 | 1.8 | 30 | 2320 | ||
1×240 | 20.3 | 1.7 | 1 | 1.6 | 1.9 | 33 | 2920 | ||
1×300 | 22.7 | 1.8 | 1 | 1.6 | 1.9 | 35 | 3650 | ||
1×400 | 25.4 | 2 | 1.2 | 2 | 2.1 | 40.5 | 4670 | ||
1×500 | 28.8 | 2.2 | 1.2 | 2 | 2.2 | 44.5 | 5870 | ||
1×630 | 30.4 | 2.4 | 1.2 | 2 | 2.3 | 49 | 7360 |
- Next: Cu/XLPE/PVC/Awa/PVC, 0.6/1 Kv, 1/C Aluminum Wire Armored Power Cable (BS 5467)
- Previous: Cu/Mica/XLPE/Lsfh, Fire Resistant Cable, 0.6/1 Kv, 1/C (IEC 60502-1)
Contact us
Similar Or Related
-
15kV 3 Core 4/0AWG Aluminum Conductor XLPE Insulated SWA Armored MV Power Cable
-
XLPE Insulated Aerial Service Drop Cable Conductor #3AWG Duplex ICEA S-66-524 NEMA WC7
-
3Cx185mm2 XLPE Insulated Copper Tape Screened Galvanized Steel Wire Armored Power Cable 33kV
-
0.6/1kV 4Cx500mm2 Copper Conductor PVC Insulated SWA Armored LV Power Cable IEC 60502-1
-
Low Voltage Single Core Power Cable 1X300 mm2 N2XCH CU/XLPE/CWS/LSF 0.6/1kV
-
Cu/XLPE/Awa/PVC, 0.6/1 Kv, Aluminum Wire Armor 1/C Power Cable (IEC 60502-1)