as 1531 Standard Bare Aluminum Alloy Conductor with Grease AAAC Conductor
More product about AAAC Conductoras 1531 Standard Bare Aluminum Alloy Conductor with Grease AAAC Conductor
AAAC
Rmjt
ISO9001, CCC, BV
Overhead
Round Wire
Bare
Bare
Aluminum
Overhead
Stranded
Bare
High Voltage
Yes
Azusa, Alliance, Cario, Flint, Greeley
ASTM B399,IEC61089,BS En50183
RMJT
Wooden Drum
ASTM BS GB IEC DIN
China
7614900000
Product Description
Low Price of Electrical Wire Aluminum Alloy Conductor AAAC for Power Transmission Line
APPLICATION:
Used as bare overhead conductor for primary and secondary distribution. Designed for utilizing a high-strength aluminum-alloy to achieve a high strength-to-weight ratio; affords good sag characteristics.
CONSTRUCTION:
AAAC is concentric-lay- stranded, similar in
construction and appearance with1350 grade aluminum conductors. They were developed to the need of economical conductor for overhead applications requiring higher strength than that of 1350 grade aluminum conductors, but without a steel core.
STANDARDS:
ASTM B399, BS EN50183 ,BS 3242,DIN 48201,IEC 61089
APPLICATION:
Used as bare overhead conductor for primary and secondary distribution. Designed for utilizing a high-strength aluminum-alloy to achieve a high strength-to-weight ratio; affords good sag characteristics.
1.AAAC conductors are extensively used for overhead distribution and transmission lines adjacent to ocean coastlines where there can be a problem of corrosion in the steel of an ACSR construction.
2.The aluminum alloy conductors are used in replace ofsingle layer ACSR conductors to reduce power loss in overhead distribution and transmission lines,when replacing the aluminum conductor steel reinforced , the AAAC can save 5-8% of the construction cost.
3.AAAC referred to have higher strength but lower conductivity than pure aluminum. Being lighter, alloy conductors can sometimes be used to replace the conventional ACSR.
CONSTRUCTION:
AAAC is concentric-lay- stranded, similar in
construction and appearance with1350 grade aluminum conductors. They were developed to the need of economical conductor for overhead applications requiring higher strength than that of 1350 grade aluminum conductors, but without a steel core.
STANDARDS:
ASTM B399, BS EN50183 ,BS 3242,DIN 48201,IEC 61089
All Aluminium Alloy Conductors(AAAC) ASTM B 399 | |||||||
AREA | Stranding | Wire Dia. | Approx. overall diameter |
Weight | Nominal Breaking Load |
Nom. DC resistance at 20 Deg. |
|
Nominal | Actual | ||||||
AWGorMCM | (mm2) | (mm) | (mm) | (kg/km) | (kN) | (ohm/km) | |
6 | 13.3 | 7 | 1.554 | 4.67 | 37 | 4.22 | 2.5199 |
4 | 21.15 | 7 | 1.961 | 5.89 | 58 | 6.71 | 1.5824 |
2 | 33.63 | 7 | 2.474 | 7.42 | 93 | 10.68 | 0.9942 |
1/0 | 53.48 | 7 | 3.119 | 9.36 | 148 | 16.97 | 0.6256 |
2/0 | 67.42 | 7 | 3.503 | 10.51 | 186 | 20.52 | 0.4959 |
3/0 | 85.03 | 7 | 3.932 | 11.8 | 234 | 25.86 | 0.3936 |
4/0 | 107.23 | 7 | 4.417 | 13.26 | 296 | 32.63 | 0.3119 |
250 | 126.66 | 19 | 2.913 | 14.57 | 349 | 38.93 | 0.2642 |
300 | 152.1 | 19 | 3.193 | 15.97 | 419 | 46.77 | 0.2199 |
350 | 177.35 | 19 | 3.447 | 17.24 | 489 | 52.25 | 0.1887 |
400 | 202.71 | 19 | 3.686 | 18.43 | 559 | 59.74 | 0.1650 |
450 | 228 | 19 | 3.909 | 19.55 | 629 | 67.19 | 0.1467 |
500 | 253.35 | 19 | 4.12 | 20.6 | 698 | 74.64 | 0.1321 |
550 | 278.6 | 37 | 3.096 | 21.67 | 768 | 83.80 | 0.1202 |
600 | 303.8 | 37 | 3.233 | 22.63 | 838 | 91.38 | 0.1102 |
650 | 329.25 | 37 | 3.366 | 23.56 | 908 | 97.94 | 0.1016 |
700 | 354.55 | 37 | 3.493 | 24.45 | 978 | 102.20 | 0.0944 |
750 | 380.2 | 37 | 3.617 | 25.32 | 1049 | 109.60 | 0.0880 |
800 | 405.15 | 37 | 3.734 | 26.14 | 1117 | 116.80 | 0.0826 |
900 | 456.16 | 37 | 3.962 | 27.73 | 1258 | 131.50 | 0.0733 |
1000 | 506.71 | 37 | 4.176 | 29.23 | 1399 | 146.10 | 0.0660 |
Similar Or Related