ACSR Bare Overhead Conductor ASTM Partridge Turkey Woodduck

Product Name:

Model NO.:

ACSR

Brand:

Jinyuan

Certification:

ISO9001, CCC

Range of Application:

Overhead

Material Shape:

Round Wire

Insulation Material:

None

Sheath Material:

None

Conductor Material:

Aluminum and Steel

Application:

Overhead, Industry

Conductor Type:

Stranded

Type:

Bare

Conductor:

Aluminum and Steel

Voltage:

High

Delivery:

15 Days

Trademark:

Transport Package:

Wooden Drums

Specification:

aluminum

Origin:

China

HS Code:

7614100000

Product Description

ACSR Bare Overhead Conductor ASTM Partridge Turkey Woodduck
1.Applications
ACSR,AAC,AAAC,ASCSR&ACAR conductor widely used in power transmission lines with various voltage levels. since they have such good characteristics as simple structure, convenient installation and maintenance, low cost for the line, large transmission capacity and are also suitable for laying across rivers and valleys where special geographical teatures exist.

2. Specification:

(1) all aluminium conductor (AAC)
(2) all aluminimum alloy conductor(AAAC)
(3) aluminum conductor steel reinforced (ACSR)
(4) anti-corrosion type ACSR
(5) aluminimum conductor aluminimum clad steel reinforced(ACSR/AW)
(6)rear earth aluminimum conductor steel reinforced(ACSR/RE)
(7)aluminimum conductor aluminimum alloy reinforced(ACAR)

3.Service Performance
(1).The permissible long-time operating temperature for aerial conductor electronic cable is 70oC.
(2).Under the circumstance that rare climate is occuring and ice coverage rate low in heavy ice area,the biggest stress of cable at the lowest point of the sag should not exceed 60% of the short-time destructive power.
(3).When connecting conductors,the AAC conductor electronic cable beside the connecting tube cant be prominent.Otherwise,the force on the operating conductors will be unbalanced.After connectors are install,the connecting tube should be painted by moisture-proof varnish in order to protect it from corrosion.
(4).Under installaion,the arc downing stress of all the conductors should be the same.With in the permissible distance of crossing buildings or dropping to the ground,the stress can be 10-15% higher than regular stress.

4.Material Standard:IEC83, IEC1089, 31, B232, BS215, DIN48204
(1). Standard: IEC61089, BS215 part2, ASTM B232, DIN48204, BS EN50182
(2). Specification: ACSR is composed by bare concentric-lay-stranded galvanized steel wire(s) with aluminum wires surrounded by one or more layers of helically. Greased ACSR can also be supplied.
(3). Application: ACSR is widely used in overhead electric power transmission and distribution lines with various voltage levels

We can supply this conductor according to different recognized standards, such as IEC61089, BS215, BS EN 50182: 2001, STM B231, CSA C49, DIN480201, JIS C3109, customer special specification also can be satisfied.

5.Technical details
AAC Technical Characteristics Based on Standard DIN 48201 / DIN EN50182

Code number	Area	Number of wires	Wire diameter	Conductor diameter	Linear mass	Rated strength	D.C. resistance at 20oC
Code number	mm2	No.	mm	mm	kg/km	kN	Ω/km
16	15.9	7	1.7	5.1	43.4	3.02	1.7986
25	24.2	7	2.1	6.3	66.3	4.36	1.1787
35	34.4	7	2.5	7.5	93.9	6.01	0.8317
50	49.5	7	3	9	135.2	8.41	0.5776
50	48.3	19	1.8	9	132.9	8.94	0.5944
70	65.8	19	2.1	10.5	180.9	11.85	0.4367
95	93.3	19	2.5	12.5	256.3	16.32	0.3081
120	117	19	2.8	14	321.5	19.89	0.2456
150	147.1	37	2.25	15.8	405.7	26.48	0.196
185	181.6	37	2.5	17.5	500.9	31.78	0.1588
240	242.5	61	2.25	20.3	671.1	43.66	0.1193
300	299.4	61	2.5	22.5	828.5	52.4	0.0966

ACSR Technical Characteristics Based on Standard BS 215-2

Code name	Nominal aluminium area	Stranding and wire diameter		Sectional area of aluminium	Total sectional area	Approx. overall diameter	Approx. mass	Calculated D.C. resistance at 20oC	Calculated breaking load
	Nominal aluminium area	Al	Steel	Sectional area of aluminium	Total sectional area	Approx. overall diameter	Approx. mass	Calculated D.C. resistance at 20oC	Calculated breaking load
	mm2	No./mm		mm2	mm2	mm	kg/km	Ω/km	kN
RABBIT	50	6/3.35	1/3.35	52.88	61.7	10.05	214	0.5426	18.35
DOG	100	6/4.72	7/1.57	105	118.5	14.15	394	0.2733	32.7
WOLF	150	30/2.59	7/2.59	158.1	194.9	18.13	726	0.1828	69.2
DINGO	150	18/3.35	1/3.35	158.7	167.5	16.75	506	0.1815	35.7
LYNX	175	30/2.79	7/2.79	183.4	226.2	19.53	842	0.1576	79.8
ZEBRA	400	54/3.18	7/3.18	428.9	484.5	28.62	1621	0.0674	131.9

AAAC Technical Characteristics Based on Standard BS 3242

Code name	Nominal aluminium area	Stranding and wire diameter	Sectional area	Approx. overall diameter	Approx. mass	Calculated D.C. resistance at 20oC	Calculated breaking load
Code name	mm2	No./mm	mm2	mm	kg/km	Ω/km	kN
ALMOND	25	7/2.34	30.1	7.02	82	1.094	8.44
CEDAR	30	7/2.54	35.47	7.62	97	0.9281	9.94
FIR	40	7/2.95	47.84	8.85	131	0.688	13.4
HAZEL	50	7/3.30	59.87	9.9	164	0.5498	16.8
OAK	100	7/4.65	118.9	13.95	325	0.2769	33.3
ASH	150	19/3.48	180.7	17.4	497	0.183	50.65
ELM	175	19/3.76	211	18.8	580	0.1568	59.1
UPAS	300	37/3.53	362.1	24.71	997	0.09155	101.5

Contact us

Similar Or Related

No related articles