6.35/11KV Copper Conductor XLPE Insulation SWA Cable 3x185mm2

Application: Designed for use as a trailing cable on AC mining equipment.

Manufactured standards: ICEA S 75-381   MT818.1-818.9 GB/T12972

Production Scope:
Nominal Cross-section:1.5-800mm²
Rated Voltage:  10kV or below
Core Number:  1-9core

Construction:
1.9/ 3.3kV below cable structure
Conductor: Strand tinned copper, class5
Insulation: EPR
Core: 3-9(Include ground-check conductor .ground conductor etc.)
Insulation shield (optional): Tinned Copper braid or Semi – conductive shielding tape
Ground-check conductor (optional): Strand tinned copper, class5
Ground-check Insulation: PP EPR
Ground conductor: Bare conductor or insulated of EPR
Inner sheath (optional): CPE
Reinforcement layer (optional): Fiber braid/ Galvanized steel wire
Outer sheath: CPE

1.9/ 3.3kV and 8.7/10kV cable structure
Conductor: Strand tinned copper, class5
Conductor shield: Extruded thermosetting semi-conducting stress control layer over conductor
Insulation: EPR
Insulation shield: Semi – conductive shielding tape
Metal shield: Tinned Copper braid/Bare Copper tape
Core: 3-7(Include ground-check conductor .ground conductor etc.)
Ground-check conductor (optional):  Strand tinned copper, class5
Ground-check Insulation: PP EPR
Ground conductor: Bare conductor
Inner sheath (optional): CPE/CR
Wrap tape: Insulation tape
Outer sheath: CPE/CR

* We can design and produce according to client’s requirement.

Factory picture: