Medium voltage UD-P suitable for Primary Underground Distribution System; buried directly or installed in underground ducts or conduits or exposed to sunlight for above ground application. To be used at 15,000 volts or less. Rated for continuous operation at 90°C conductor temperature.

 

Conductor:                     Bare aluminum or copper stranded class B conductor (compressed stranding).

Strand Shield:                Extruded semi-conducting strand shield.

Insulation:                      Cross-linked polyethylene (XLPE) or tree-retardant

                                         cross-linked polyethylene (XLPE-TR) insulation.

Insulation Shield:          Extruded semi-conducting insulation shield.

Neutral Wires:                Coated or uncoated copper concentric neutral wires.

Embedded Jacket:        Non-conducting linear low density PE(LLDPE) encapsulating jacket with exturded red stripes.

                                        Optional semi-conducting PE jacket.

 

Normal Continuous    90°C

Overload                    130°C

Short Circuit               250°C

 

•Simultaneous extrusion of strand shield, insulation and insulation shield (triple extrusion, dry curing process) combines to form a virtually perfect cable core eliminating unequal electrical stress.

•XLPE insulation offers low moisture absorption, good chemical resistance, low dielectric loss and high dielectric strength. XLPE-TR offers, in addition, tree-retardant characteristics.

 

•Cable in Duct (C-I-C)

•Parallel

•Triplex

•Strand Filled

 

ICEA S-94-649

AEIC CS-8