Fkkj, Power Cable, 0.6/1 Kv, Cu/PVC/Cws/Cts/PVC (HD 603.3/IEC 60502-1)

FKKJ, Power Cable, 0.6/1 KV, CU/PVC/CWS/CTS/PVC (HD 603.3/IEC 60502-1)
CONSTRUCTION
Conductors: copper annealed circular compacted stranded conductor class 2 (RM) or stranded sector – shaped conductor class 2 (SM) acc. to EN 60228
Insulation: special PVC compound type DIV11 acc. to HD 603.1
Cable core: Insulated conductors are twisted together with eventually central filler
Inner covering: PVC tape
Concentric conductor: round copper wires and copper tape
Sheath: special PVC compound type DMV19 acc. to HD 603.1

CHARACTERISTIC
Colour of sheath: black
1-core: black
2-core: blue, brown
3-core: brown, black, grey
4-core: blue, brown, black, grey
5-core: blue, brown, black, grey, black

Maximum conductor operating temperature: +70oC
Lowest ambient temperature for fixed installation: -30oC
Lowest installation temperature: 0oC
Maximum short-circuit conductor temperature: + 160oC

Minimum bending radius: 15 x D single core cables, 12 x D multicore cables, D – overall diameter
Max. permissible tensile stress with cable grip for Cu-conductor: 50 N/mm2
Test voltage: 3,5kV AC 50Hz, 5min

Current of short-circuit (1 sec): up to 300mm2 115 x nominal cross section conductor (A)
above 300mm2 103 x nominal cross section conductor (A)
Flame retardant: IEC 60332-1-2

APPLICATIONS
PVC insulated and sheathed power cables for the supply of electrical energy. Special for installations in the open air, in underground and water, indoors, in cable ducts. The concentric conductor is allowed to use as neutral, protective or earthed conductor. Simultaneously, this also is permitted to apply as a screen for example earth-connected protection against contact.